Wire lug crimping tool

Accessory

• 10876 Die Set, RG 58/59/62/71, 10877 Die Set, 20-10 AWG Open Barrel Connectors
  (1)
• 52178 UPC 52178 120 V Charger
  (5)
• UA12T, UA12ID, UC26, UC40, UCACSR, UCUNC14, UCUN38, UCUN12
  (1)

Battery

• Makita 18V 2.0AH
  (2)
• Makita 18V 3.0AH
  (2)
• 18 V, 3.0 AMP-HR Lithium-Ion
  (5)
• 18 V, 1.5 AMP-HR Lithium-Ion
  (5)
• 10.8V 1.5Ah Li-Ion
  (2)

Battery Charge Time

• 15 minutes
  (2)
• 22 minutes
  (2)
• 1 Hour
  (3)
• 1 HR
  (2)
• 30 MINT
  (3)
• 30 Minutes
  (2)
• 40 Minutes
  (2)

Battery Charger

• Makita 120V Battery Charger (DC18RC-X)
  (4)
• MBC110, MBC220, 110V or 220V CHARGER AVAILABLE
  (2)

Capacity

• Kwik Cycle 9 Die Sets
  (4)
• 4 AWG - 1000 kcmil copper or 6 AWG -1000 kcmil aluminum
  (1)

Connector Type

• Service entrance connectors, C-taps, H-taps, overhead and underground connectors.
  (5)
• 3/8" male screw-type coupler
  (3)
• Service entrance connectors, H-Taps, Tension splices, Jumper splices, Stirrups, Color coded lugs & splices
  (36)
• Color-coded lugs and splices
  (112)
• #8-500 MCM Cu, #8-350 MCM AI, Aluminium H-taps up to 4/0-4/0
  (11)
• Copper connectors and wire from #8AWG to 750 kcmil (MCM) and aluminum connectors and wire from #8AWG to 500 kcmil (MCM)
  (1)
• Copper connectors and wire from #8AWG to 750 kcmil (MCM) and aluminum connectors and wire from #8AWG to 500 kcmil (MCM
  (3)

Crimp Cycle Time

• Pressing cycle time 3-4 seconds
  (4)
• 2 S
  (3)
• 2 Seconds
  (1)
• Approximately 2 Seconds
  (1)
• 3 seconds
  (3)
• 1.3 Sec
  (2)

Crimping Capacity

• 22-6 AWG
  (1)
• 26-13 AWG (0.140 - 2.500 SQ-MM)
  (1)
• Single Cable Wire Ferrules: 7-1/0 AWG (10.000 - 50.000 SQ-MM), Twin Wire Ferrules: 2 x 11- 2 x 5 AWG (2.000 x 4.000 - 2.000 x 16.000 SQ-MM)
  (1)
• 1/0 - 3/0 AWG (50.000 - 90.000 SQ-MM)
  (1)
• 25-10 AWG (0.140 - 6.000 SQ-MM)
  (1)
• Single Cable Wire Ferrules: 26-10 AWG (0.140 - 6.000 SQ-MM), Twin Wire Ferrules: 2 x 20 -2 x 13 AWG (2.000 x 0.500 - 2.000 x 2.500 SQ-MM)
  (1)
• Single Cable Wire Ferrules: 10-6 AWG (6.000 - 16.000 SQ-MM), Twin Wire Ferrules: 2 x 11 -2 x 10 AWG (2.000 x 4.000 - 2.000 x 6.000 SQ-MM)
  (1)
• 8 AWG - 250 kcmil copper color coded connectors, 8 AWG - 4/0 kcmil aluminum color coded connectors
  (1)
• 8-1 AWG Copper Color Coded Connectors
  (1)
• Press Copper and Steel Fittings up to 1-1/4'' (31.8 mm). Press PEX Fittings up to 1-1/2'' (38.1 mm)
  (2)
• Press copper and steel fittings up to 4'' (101.6 mm). Press PEX fittings up to 2'' (50.8 mm)
  (2)
• 22-10 AWG
  (2)
• Uses Kwik Cycle 9 Die Sets
  (1)
• 22-8 AWG
  (1)
• 22-10 AWG Insulated And Uninsulated Terminals And Splices
  (2)
• 22-10 AWG Insulated And Uninsulated Terminals And Splices, 26-8 AWG Wire Ferrules
  (1)
• 6 AWG - 500 KCMIL Copper Lugs And Copper Splices, 6 AWG - 400 KCMIL Aluminum Lugs And Aluminum Splices
  (5)
• Refer to crimping chart in instruction manual
  (3)
• 8 AWG - 1/0 AWG Copper
  (1)
• Connector 10-1/0 AWG 5/8 IN Service Entrance Connectors, 1/0-4/0 AWG 0.840 Service Entrance Connectors, 6 - 4/0 AWG Aluminum H Taps, 10-2 AWG Copper H Taps, 6-2/0 AWG Copper Tension Splices, 6-4/0 AWG All Aluminum Tension Splices, 4-1/0 AWG One Piece ACSR
  (36)
• 300 kcmil (MCM) Copper, 2/0 AWG Al
  (6)
• 600 kcmil (MCM) Copper, 350 kcmil (MCM) Al
  (23)
• 600 kcmil (MCM) Copper/350 kcmil (MCM) Al
  (1)
• 1000 Kcmil (MCM) Cu & Al
  (12)
• 750 Kcmil (MCM) Cu & Al
  (43)
• 1500 kcmil (MCM) Copper, 1250 kcmil (MCM) Al
  (6)
• Standard Strand, 500 kcmil (MCM) Copper, 350 kcmil (MCM) Al Fine Strand, 350 Kcmil (MCM) Copper DLO, 373.7 Kcmil (MCM) Copper
  (6)
• 500 kcmil (MCM) Copper, 400 kcmil (MCM) Al
  (6)
• 1 AWG - 250 kcmil
  (1)
• 750 Kcmil (MCM) Cu and Al
  (1)
• 600 kcmil (MCM) Cu, 350kcmil (MCM) Al
  (4)
• Standard Strand, 8 AWG - 500 kcmil Cu, 1/0 AWG - 350 kcmil Al, Fine Strand, 8 AWG - 350 Kcmil CuDLO, 8 AWG - 373.3 Kcmil Cu
  (4)
• #8-500 MCM Cu, #8-350 MCM AI, Aluminium H-taps up to 4/0-4/0
  (11)
• Copper connectors and wire from #8AWG to 750 kcmil (MCM) and aluminum connectors and wire from #8AWG to 500 kcmil (MCM)
  (1)
• Copper connectors and wire from #8AWG to 750 kcmil (MCM) and aluminum connectors and wire from #8AWG to 500 kcmil (MCM
  (3)

Crimping Force

• 6.2 ton
  (2)
• 6 ton
  (5)
• 9000.000 LB (40.000 KN)
  (4)
• 24000 LB
  (5)
• 30000 LB
  (1)
• Pressing Force 4,275 lbs (19kN)
  (2)
• Pressing Force 7,200 lbs (32kN)
  (2)
• 12400.000 LB (55.000 KN)
  (5)
• 2900.000 LB (13.000 KN)
  (5)
• 24,000 (106 kN)
  (2)
• 12,000 (54 kN)
  (1)
• 3,400 LB (15kN)
  (2)
• 12,000 lbs. (53 kN) LB
  (39)
• 7,900 lbs. (35 kN) LB
  (6)
• 12,000 lbs. (53 kN)
  (24)
• 30,000 lbs. (134 kN) LB
  (12)
• 24,000 lbs. (106 kN) LB
  (26)
• 24,000 lbs. (106 kN)
  (8)
• 24,000 lbs (106 kN)
  (2)
• Variable 3-6 Ton (30-60 kN) LB
  (6)
• 12,400 lbs. (55 kN) LB
  (12)
• 12,400 lbs (55kN)
  (1)
• 12,400 lbs. (55 kN)
  (7)
• Variable 3-6 Ton (30-60 kN)
  (4)
• 12,000 lbs (53 kN)
  (1)
• 6 Ton (53kN)
  (16)

Estimated Cycles per Charge

• 150
  (2)
• 300
  (2)
• 400
  (5)
• 250
  (2)

Finish

• Phosphated, polished and tempered for increased durability and corrosion resistance
  (1)

Handle Type

• Fiberglass
  (1)
• Double Cushioned And Molded Grip
  (1)
• Cushioned Grip
  (1)
• Standard And Dipped Grip
  (1)
• Molded
  (1)
• Rubber Overmold
  (2)
• In-Line Style with over molded rubber grip
  (89)
• Pistol Style with over molded rubber grip
  (72)
• Locking extendable handles with four length sizes
  (1)

Height

• 2" (51mm)
  (2)
• 9 IN
  (2)

Includes

• D3 And O Die Grooves
  (1)
• D3 And BG Die Grooves
  (1)
• Cutter And Replaceable Stripper Blade Set
  (1)
• Pistol Grip Press Tool(32kN). 1 Carrying case.
  (1)
• Die
  (3)
• Kearney O And 5/8 Die Grooves
  (1)
• Kearney D And O Die Grooves
  (1)
• 10873, 10874 And 10875 Die Sets
  (1)
• 230 VAC Adapter
  (1)
• Heavy duty canvas bag
  (3)
• 1 Pistol Grip Press Tool (32kN). 6 Pressing Jaws - 1/2'', 3/4'', 1'', 1-1/4'', 1-1/2'', & 2'' (12.7 mm, 19.1 mm, 25.4 mm, 31.8 mm, 38.1 mm, & 50.8 mm) for Copper and Steel. 2 Makita 18V 3.0AH. Makita 120V Battery Charger (DC18RC-X). 1 Carrying case.
  (1)

Jaw

• None included in this kit
  (1)
• Works with CJD3BG, CJD3O, CJD3, CJK, CJB, CJXPJ, CJ22
  (1)
• 1/2'' (12.7 MM), 3/4'' (19.1 MM), 1'' (25.4 MM), 1-1/4'' (31.8 MM) jaw for copper and steel.
  (1)
• 1/2'' (12.7 MM), 3/4'' (19.1 MM), 1'' (25.4 MM), 1-1/4'' (31.8 MM), 2'' (50.8 MM) Jaw for Copper and Steel
  (1)

Material

• Forged Steel
  (2)
• 120V Charger, Two 4.0Ah Batteries
  (2)
• 230V Charger, Two 4.0Ah Batteries
  (2)
• Bare tool configuration
  (2)
• 12V Charger, Two 4.0Ah Batteries
  (2)

Material Master Number

• EK50ML120B
  (1)
• EK50ML138B
  (1)

Opening Size

• 1.65 IN
  (4)
• 1.4 IN
  (1)
• 1.65 IN (42 mm)
  (18)
• 1.2 IN (30 mm)
  (6)
• Flip top head
  (4)
• Open Load Head
  (4)

Overall Length

• 26 in
  (1)
• 10 in
  (1)
• 25-3/8 IN (645.000 MM)
  (4)
• 12.800 IN (325.000 MM)
  (1)
• 6.900 IN (175.000 MM)
  (2)
• 13.200 IN (335.000 MM)
  (2)
• 8.400 IN (213.000 MM)
  (1)
• 8.900 IN (225.000 MM)
  (1)
• 15 IN
  (1)
• 10-1/2 IN
  (1)
• 22-3/8 IN
  (1)
• 10.000 IN (273.000 MM)
  (1)
• 9.000 IN (23.000 CM)
  (1)
• 9-1/2 IN (241.000 MM)
  (2)
• 14.000 IN (355.000 MM)
  (5)
• 12-3/4 IN (324.000 MM)
  (5)
• 9-3/4 IN (24.800 CM)
  (1)
• 13" (330mm)
  (1)
• 12.75" (324mm)
  (1)
• 15" (381mm)
  (1)
• 9"
  (3)
• 15-3/4 IN
  (1)
• 18.5 IN (470mm)
  (28)
• 13.25 IN (337mm)
  (6)
• 15.75 IN (438mm)
  (12)
• 19.625 IN (498mm)
  (6)
• 16.25 IN (413 mm)
  (18)
• 15.5 IN (394 mm)
  (5)
• 15.75 IN (400mm)
  (6)
• 14 IN (355mm)
  (6)
• 14.875 IN (378mm)
  (6)
• 16.5 IN (420mm)
  (12)
• 14.75 IN (375mm)
  (6)
• 19 IN (482mm)
  (19)
• 17 IN (432mm)
  (4)
• 16 IN (406mm)
  (4)
• 21"
  (9)
• 13.5"
  (1)
• 10"
  (2)
• 20"
  (3)

Packaged Weight

• 13.41
  (1)
• 14.33
  (1)
• 14.12
  (1)
• 9.5
  (2)

Replacement Part

• 10873 Die Set, 22-10 AWG Insulated Terminals, 10874 Die Set, 22-10 AWG Uninsulated Terminals, 10875 Die Set, 26-8 AWG Wire Ferrules
  (1)
• 52176 UPC 52176 18 V 3.0 AMP-HR Li-ion Battery, 10118 UPC 10118 Carrying Case, 12274 UPC 12274 Carrying Strap, 52178 UPC 52178 120 V Charger, 52179 UPC 52179 12 V Charger, 52180 UPC 52180 230 V Charger
  (5)
• 52177 UPC 52177 18 V 1.5 AMP-HR Li-ion Battery, 25752 UPC 25752 Carrying Case, 52178 UPC 52178 120 V Charger, 52179 UPC 52179 12 V Charger, 52180 UPC 52180 230 V Charger
  (4)
• 52177 18 V 1.5 Ah Li-ion Battery, 25752 Carrying Case
  (1)

Rotation

• Head rotation 350 degrees
  (3)
• 350&#176
  (2)
• 350 DEG
  (2)

Short Description

• BARE CRIMPING TOOL, EK50ML120B
  (1)
• BARE CRIMPING TOOL, EK50ML138B
  (1)

Standard

• C/US UL Listed
  (131)
• ASTM F1505-07
  (1)
• C/US UL Listed *UL and cUL classified with Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors. The products listed above are registered trademarks of Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and
  (1)
• UL and cUL Classified to 7 major lug brands -Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors (Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union are trademarks or registered trademarks
  (1)
• C/US UL Listed, CE Listed
  (1)
• C/US UL Listed, IEC 62481-1; VDE, CSA, MET Tested
  (4)
• C/US UL Listed, IEC 62481-1, VDE, CSA, MET Tested
  (12)
• C/US UL Listed, IEC 62481-1, VDE, CSA, MET Tested
  (1)

Type

• Manual
  (4)
• Trapezoidal
  (5)
• Square
  (1)
• 12 ton crimping head, remote powered
  (1)
• 15 ton crimping head, remote powered
  (1)
• Manual hydraulic quad point dieless crimping tool with open head
  (1)
• Remote Powered Quad Point, Open Head Dieless
  (1)
• Manual hydraulic quad point dieless crimping tool with flip top head
  (1)
• Crimping head, quad-point, open head, dieless and remote powered
  (1)
• Manual hydraulic 12 ton crimping tool
  (2)
• Manual crimper
  (1)
• Manual hydraulic 12 ton crimping tool. PVC coated
  (1)
• 12 ton crimping head, PVC covered, remote powered
  (1)
• Interchangeable
  (3)
• Crimping jaw unit for Kearney O dies
  (1)
• Crimping jaw unit with single D die groove for W style dies.
  (1)
• Knockout
  (1)
• Crimping jaw unit with single D and BG die groove for W style dies.
  (1)
• Crimping jaw unit with single D and O die groove for W style dies.
  (1)
• Crimping jaw unit with Nicopress X, P and J die grooves
  (1)
• Terminal
  (7)
• Hand hydraulic dieless crimping tool
  (1)
• Premium Terminal
  (1)
• Battery Powered, Open Rubber Covered Head, Quad Point Dieless
  (3)
• Battery Powered, Quad Point Dieless
  (2)
• Insulated Terminal
  (1)
• Battery Powered
  (1)
• Bare Tool
  (1)
• Mechanical
  (1)
• Die style crimper
  (81)
• Dieless style crimper
  (32)
• Die style crimper/cutter
  (20)
• K Series
  (1)
• 6 Ton Crimping
  (3)
• Die style crimper/cutter/punch
  (4)
• 4-Point Indent Crimping
  (1)

Weight

• 7.100 LB (3.200 KG)
  (4)
• 0.300 LB (136.000 GM)
  (1)
• 0.400 LB (0.200 KG)
  (1)
• 1.800 LB (0.800 KG)
  (2)
• 1.100 LB (0.400 KG)
  (3)
• 1.400 LB (0.600 KG)
  (1)
• 1.050 LB (0.480 KG)
  (3)
• 1.350 LB (0.600 KG)
  (1)
• 12.000 LB (5.400 KG)
  (5)
• 3-1/2 LB (1.600 KG)
  (5)
• 9.75 lbs. (4.42kg)
  (2)
• 1.7 LB
  (2)

Weight With Jaws

• 4 lbs. (1.8kg)
  (1)

Width

• 2-7/8 IN (73.000 MM)
  (5)
• 3.75" (95mm)
  (1)
• 4.25" (108mm)
  (1)
• 2" (51mm)
  (1)
• Crimp Head : 3-1/8 ( 79.375mm) IN
  (1)

Width Head Open

• 4" (108mm)
  (1)
• Crimp Head : 3-5/8 ( 92.075mm) IN
  (1)

Wire Size

• Connector 10-1/0 AWG 5/8 IN Service Entrance Connectors, 1/0-4/0 AWG 0.840 Service Entrance Connectors, 6 - 4/0 AWG Aluminum H Taps, 10-2 AWG Copper H Taps, 6-2/0 AWG Copper Tension Splices, 6-4/0 AWG All Aluminum Tension Splices, 4-1/0 AWG One Piece ACSR
  (16)
• 8 AWG - 300 kcmil Cu, 8 AWG - 2/0 kcmil Al
  (6)
• 8 AWG - 600 kcmil Cu, 8 AWG - 350 kcmil Al
  (23)
• 8 AWG - 1000 Kcmil Cu & Al
  (6)
• 8 AWG - 750 Kcmil Cu & Al
  (20)
• 8 AWG - 1500 kcmil Cu, 8 AWG - 1250 kcmil Al
  (6)
• Standard Strand, 8 AWG - 500 kcmil Cu, 1/0 AWG - 350 kcmil AlFine Strand, 8 AWG - 350 Kcmil CuDLO, 8 AWG - 373.3 Kcmil Cu
  (6)
• 6 AWG - 500 kcmil Cu, 6 AWG - 400 kcmil Al
  (10)
• 6 AWG - 750 Kcmil Cu & Al
  (9)
• 4 AWG - 1000 kcmil Cu, 6 AWG - 1000 kcmil Al
  (6)
• 6 AWG - 750 kcmil Cu and Al
  (1)

Manufacturers