Electrician kits

Accessory Type

• 7-Ton Battery-Hydraulic Knockout Kit
  (1)

Base Size

• Case accommodates 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm)
  (1)

Batteries

• 3 X AAA (Cat. No. ET250); Internal Lithium-Ion Battery (56049)
  (1)

Belt Attachment Method

• Loop
  (1)

Belt Clip

• No
  (1)

Belt Length

• 0 in
  (1)

Belt Width

• 0 in
  (1)

Clothing Size

• One Size Fits All
  (1)

Color / Finish

• Red/Black
  (1)
• Red
  (1)
• Black, Red
  (2)

Consist Of 1

• Crimpmaster Crimp Tool frame
  (1)
• Die Set
  (1)
• 30-496 Telemaster RJ-11/RJ-45 Tool, Black Handle
  (1)
• 30-496 Telemaster For RJ-11/RJ-45 Plugs
  (1)
• 30-496 Telemaster RJ-11/RJ-45 Tool, Black Handle,Telemaster RJ-11/RJ-45 Tool
  (1)
• 30-430 Side-Cutting Pliers; NE Type High-Leverage with Crimp Die; 9-1/4 IN Length
  (1)
• Premium Tuff-Tote Tool Carrier with Assortment Of 13 Tools:One Premium T-Stripper
  (1)
• 35-485 Punchmaster II Punchdown Tool With 110 Blade
  (1)
• 45-415 Reflex T-5 T-Stripper Wire Stripper
  (1)
• Four LASERedge Pliers with Smart-Grip Handles (35-3012 9-1/4 IN Linesman with Fish Tape Puller; 35-3038 8 IN Long Nose;35-3430 10 IN Tongue and Groove; 35-3052 9 1/2 IN Cable Cutter)
  (1)
• 35-3012 Smart-Grip 9-1/4 IN New England Nose High-Leverage Pliers with Fish Tape Puller
  (1)
• 35-511 1/8 To 1/2 Bit Diameters Sizes (IN)
  (1)
• One LASERedge Plier With Dipped Grip Handles (30-430 9-1/4 IN Linesman With Crimper)
  (1)
• 35-908 Twist-a-Nut Screwdriver
  (1)
• 30-633 Economy F-Connector Compression Tool
  (1)
• SmoothStart 7/8 IN, 1-1/8 IN, 1-3/8 IN Replacement Tips
  (1)
• Two SmoothStart 7/8 IN 1-1/8 IN; 1-3/8 IN; 1-3/4 IN; 2 IN And 2-1/2 IN Replacement Tips
  (1)
• 30-5430 9-1/4 IN Wire Man Side-Cutting Pliers With Crimp And Fish Tape Puller
  (1)
• 35-5012 WM 9 1/4 IN Side Cutter Pliers
  (1)
• 45-120 T-5 T-Stripper Wire Stripper
  (1)
• 85-925 25 IDC Connectors (UR-I, 3-Wire Butt Splice)
  (1)
• 30-793 OmniSEAL Pro XL Compression Tool
  (1)
• 2-1/2" - 4" conduit size Standard Round punches
  (1)
• 746A Ram and 1725 Foot Pump
  (4)
• Quick Draw Flex knockout driver
  (3)
• 746A Ram and 767 Hand Pump
  (7)
• 1/2" - 1-1/4" conduit size Slug-Buster punches
  (2)
• 1-1/2" - 2" conduit size Standard Round punches
  (1)
• 1-1/2" - 2" conduit size Slug-Buster punches
  (1)
• Quick Draw 90 knockout driver
  (1)
• Quick Draw knockout driver
  (2)
• KRW-1 High-leverage ratchet wrench
  (2)
• GT-12A voltage tester. Torpedo level. 18 oz electrician's hammer. 25' tape measure. Keystone tip square shank 1/4 x 4" flat blade screwdriver. Keystone tip square shank 3/16 x 6" flat blade screwdriver. Phillips tip #1 - 3/16 x 3" screwdriver. Phil
  (1)
• 25' tape measure. Keystone tip square shank 1/4 x 4" flat blade screwdriver. Phillips tip #1 - 3/16 x 3" screwdriver. Phillips #2 x 4" screwdriver. Side cutting 9" pliers. Pro Plus wire stripper. Pump pliers 10". Long nose pliers 8". Diagonal cut
  (1)
• Heavy-duty 4 pocket leather pouch. Phillips tip #2 - 1/4 x 4" screwdriver. Cabinet tip round shank 3/16 x 6" flat blade screwdriver. Pro Plus wire stripper 10-18 AWG. Side cutting pliers 9".
  (1)
• Side cutting pliers 9" with molded grip. Diagonal pliers 8" with molded grip. Long nose pliers 8" with molded grip. Pump pliers 10" with molded grip. NM cable ripper. Flat Key screwdriver 1/4 x 4". Flat cabinet screwdriver 3/16 x 6". Phillips screw
  (1)
• High leverage diagonal cutting pliers 8" with molded grip. High leverage side cutting long nose pliers 8" with molded grip. Pump pliers with molded grip 10". Heavy duty keystone tip screwdriver. High leverage side cutting pliers 9" with molded grip.
  (1)
• Leather 5 pocket pouch. Wire stripper. Side cutting pliers 9". Terminal crimping tool. 6-in-1 multi tool.
  (1)
• Long nose dipped grip pliers 8". Wire stripper. 6-in-1 multi-tool. 4 pocket polyester pouch.
  (1)
• High speed titanium coated drill bit set. Masonry drill bit set. Magnetic nut driver set. Quick change chuck. Magnetic bit extension. Security driver bit set. Total pieces 68.
  (1)
• LS50L2 knockout driver
  (4)
• Insulated diagonal cutting pliers 8". Insulated long-nose pliers 8". Insulated pump pliers 10". Insulated cabinet tip screwdriver 1/4 x 4". Insulated phillips tip screwdriver #2 x 4". Custom tool roll-up carrier.
  (1)
• Long nose pliers 8". Diagonal cutting pliers 8". High leverage side cutting pliers 9". Cabinet tip slotted screwdriver 1/4 x 4". Phillips screwdriver #2 x 4". ProPlus wire stripper 10-18 AWG.
  (1)
• DM-25, GT-11, GT-10GFI in a zippered case.
  (1)
• DM-25, GT-11, GT-10 in a zippered case.
  (1)
• Intelli-PUNCH knockout driver
  (3)
• 1/2" - 4" conduit size knockouts (hole size: 0.89" - 4.54" or 22.5 mm - 115.4 mm)
  (1)
• Professional tool backpack. 9" side cutting pliers with molded grip. 8" diagonal pliers with molded grip. 8" long nose pliers with molded grip. 10" pump pliers with molded grip. SS wire stripper. NM cable ripper. SS stripping/crimping combo tool. Ca
  (1)
• Heavy duty multi-pocket tool bag 20". 9" side cutting pliers with molded grip. 8" diagonal pliers with molded grip. 8" long nose pliers with molded grip. 10" pump pliers with molded grip. SS wire stripper. NM cable ripper. SS stripping/crimping comb
  (1)
• GT-12A voltage tester. Torpedo level. 18 oz electrician's hammer. 25' tape measure. Keystone tip square shank 1/4 x 4" flat blade screwdriver. Cabinet 3/16 x 6" flat blade screwdriver. Phillips tip #1 - 3/16 x 3" screwdriver. Phillips #2 x 4" scre
  (1)
• 1/2" - 2" conduit size Slug-Buster punches
  (6)

Consist Of 2

• Die Set
  (1)
• Two Eyelets
  (1)
• 85-346 8-Position 8-Contact Round Solid, 25/Card
  (1)
• 85-351 4-Position, RJ-11 Stranded Modular Plugs
  (1)
• 45-165 Coaxial Stripper, 3/16 IN To 5/16 IN, UTP/Coax Stripper
  (1)
• 35-029 Diagonal-Cutting Pliers with Angled Head; 8 IN Length
  (1)
• Three Different Pliers
  (1)
• 35-497 Punchmaster II 66 Blade Only
  (1)
• 30-428 Combo Crimp/Strip Tool
  (1)
• 45-915 Kinetic Reflex T-Stripper Wire Stripper
  (1)
• 35-3038 Smart-Grip 8.5 IN Long Nose Plier with Cutter
  (1)
• 35-513 1/4 To 7/8 Bit Diameters Sizes (IN)
  (1)
• 45-120 Premium T-5 T-Stripper Wire Stripper
  (1)
• 35-098 Twist-a-Nut Deburring Head-Square Tip
  (1)
• 45-074 Data T-Cutter
  (1)
• Carrying Case
  (2)
• 45-120 T-5 T-Stripper Wire Stripper; Solid 10-18; Stranded 12-20
  (1)
• 35-5028 WM 8 IN Diagonal Pliers
  (1)
• 35-5012 WireMan 9-1/4 IN Side-Cutting Pliers
  (1)
• 45-719 Kinetic T-Stripper/Tel Crimp Tool
  (1)
• 30-503 Crimpmaster Crimp Tool, For CATV RG-59 And RG-6 Captive Ring F-Connectors
  (1)
• 2-1/2" - 4" conduit size dies
  (1)
• 1/2" - 2" conduit size Slug-Buster punches
  (13)
• 7/16" short hydraulic draw stud
  (3)
• 7/16" hydraulic draw stud
  (5)
• 1/2" - 2" conduit size Standard Round punches
  (1)
• 1/2" - 4" conduit size Standard Round punches
  (1)
• 1/2" - 1-1/4" conduit size dies
  (2)
• 1-1/2" - 2" conduit size dies
  (2)
• KCC-LS2 carrying case
  (1)
• 1/2" and 3/4" conduit size and 30.5 mm Slug-Buster punches
  (1)
• Punch up to 10 ga mild steel or 12 ga stainless steel
  (1)
• 1/2" - 2" conduit size dies
  (4)
• 2-1/2" - 4" conduit size Standard Round punches
  (2)
• 1/2" - 3" and 4" conduit size Standard Round punches
  (1)

Consist Of 3

• Two Eyelets
  (1)
• Two Leaders
  (1)
• 86-395 6-Position 6-Contact Round Solid, 100/Bag
  (1)
• 85-352 6-Position, RJ-11 Stranded Modular Plugs
  (1)
• 85-346 8-Position 8-Contact Round Solid, 25/Card, 8-Position RJ-45 Non-Keyed Solid Plugs
  (1)
• 35-038 Long-Nose Pliers; Heavy-Duty with Cutter; 8-1/2 IN Length
  (1)
• Five Screwdrivers
  (1)
• 35-088 Electrician's Scissors With Stripping Notch
  (1)
• Four Cushion Grip Screwdrivers (35-193 1 x 3 Phillips; 35-194 2 x 4 Phillips; 35-186 3/16 IN x 6 Slotted Cabinet Tip; 35-164 1/4 IN x 4 Slotted Round Shank)
  (1)
• 35-908 7-In-1 Twist-A-Nut Screwdriver
  (2)
• 35-3430 Smart-Grip 10 IN Tongue & Groove Pliers with Heavy-Duty Grips
  (1)
• 35-515 1/4 To 1-1/8 Bit Diameters Sizes (IN)
  (1)
• 35-923 Twist-a-Nut& Tap Tool Shaft
  (1)
• 45-526 Coaxial Stripper, 2-Step
  (2)
• 35-194 Phillips Screwdriver; For #2 Phillips Head Screws; 1/4 IN Diameter X 4 IN Long Shank
  (1)
• 35-5038 8 IN Long-Nose Pliers
  (1)
• 35-505 Pocket Pal Tool Holster
  (1)
• 1-1/8" hydraulic draw stud
  (1)
• 2-1/2" - 4" conduit size Standard Round punches
  (4)
• 3/4" short hydraulic draw stud
  (3)
• 1/2" - 2" conduit size dies
  (8)
• 3/4" hydraulic draw stud
  (5)
• 1/2" - 4" conduit size dies
  (3)
• 7/16" ball-bearing draw stud
  (4)
• 1/2" and 3/4" conduit size and 30.5 mm dies
  (1)
• Intelli-PUNCH knockout driver
  (1)
• 7/16" short hydraulic draw stud
  (1)
• 7/16" hydraulic draw stud
  (2)
• 1/2" - 3" and 4" conduit size dies
  (1)
• 2-1/2" - 3" and 4" conduit size Standard Round Punches
  (1)

Consist Of 4

• Two Leaders
  (1)
• Instant Adhesive
  (1)
• 85-344 6-Position 4-Contact Round Solid, 25/Card
  (1)
• 85-353 8-Position, RJ-45 Stranded Modular Plugs
  (1)
• 35-430 Tongue and Groove Pliers; 10 IN Length
  (1)
• One Multi-Crimp Tool
  (1)
• 45-165 UTP/STP Stripper
  (1)
• 35-210 Electricians Hammer
  (1)
• Five Cushion Grip Screwdrivers (35-193 1 x 3 Phillips;35-194 2 x 4 Phillips; 35-186 3/16 IN x 6 Slotted Cabinet Tip;35-164 1/4 IN x 4 Slotted Round Shank; 35-406 3/16 IN x 6 Screw Holding Slotted)
  (1)
• 45-915 Kinetic Reflex Super T-Stripper; Solid 10-18; Stranded 12-20
  (1)
• 35-517 1/4 To 1-3/8 Bit Diameters Sizes (IN)
  (1)
• 35-242 25 FT Auto-Lock Tape Measure
  (1)
• 35-913 1/4 IN slotted - #2 Square Recess
  (1)
• 92-610 RG-59 Reg/Tri/Quad Compression F-Connector, Jar Of 50
  (1)
• 35-186 Electrician's Cabinet Tip Screwdriver; 3/16 IN Diameter X 6 IN Long Shank
  (1)
• 35-5430 10 IN Tongue & Groove Pliers
  (1)
• 35-905 5-In-1 Screwdriver/Nutdriver
  (1)
• 45-520 Coaxial Stripper, 3-Step
  (1)
• KCC-LD4 carrying case
  (1)
• 1/2" - 4" conduit size dies
  (5)
• KCC-QDF2 carrying case
  (1)
• 7/16" short hydraulic draw stud
  (3)
• KCC-7672 carrying case
  (1)
• 7/16" hydraulic draw stud
  (8)
• 3/4" ball-bearing draw stud
  (4)
• KCC-17254 carrying case
  (1)
• KCC-QD2 carrying case
  (2)
• 7/16" ball-bearing draw stud
  (2)
• 18V Li-ion 2.0Ah Battery
  (1)
• (2) 18V Li-ion 3.0Ah Batteries
  (2)
• 3/4" short hydraulic draw stud
  (1)
• 3/4" hydraulic draw stud
  (2)
• 1/2" - 3" and 4" conduit size dies
  (1)

Consist Of 5

• Instant Adhesive
  (1)
• 85-351 4-Position, RJ-11 Stranded Modular Plugs
  (1)
• 85-344 4 Position, RJ-11 Modular Plugs, Qty 15
  (1)
• 35-052 Cable Cutter; For 2/0 And Smaller Cable
  (1)
• One Torpedo Level
  (1)
• 35-183 Electrician's Cabinet Tip Screwdriver
  (1)
• 35-242 25 FT Auto-Lock Tape Measure
  (1)
• 35-286 Hawkbill Knife
  (1)
• 35-193 Phillips Screwdriver; For #1 Phillips Head Screws; 3/16 IN Diameter X 3 IN Long Shank
  (1)
• 35-300 Utility Knife
  (1)
• 35-914 3/16 IN slotted - #1 Square Recess
  (1)
• 92-650 RG-6 Reg/Tri/Quad Compression F-Connector, Jar Of 50
  (1)
• 35-505 Pocket Pal Tool Carrier
  (1)
• 45-120 T-5 T-Stripper Wire Stripper; Solid 10-18; Stranded 12-20
  (1)
• 45-523 3-Step Replacement Cassette, Brown
  (1)
• 7/16" hydraulic draw stud
  (4)
• 3/4" short hydraulic draw stud
  (3)
• 3/4" hydraulic draw stud
  (5)
• KCC-BB1-1/4 carrying case
  (2)
• KCC-BB2 carrying case
  (2)
• 3/4" ball-bearing draw stud
  (2)
• 120V AC Charger
  (2)

Consists Of 10

• KCC-LS4 carrying case
  (2)

Consists Of 5

• 7/16" hydraulic draw stud
  (2)
• KCC-QD2 carrying case
  (1)
• KCC-7672 carrying case
  (1)
• KCC-LS2 carrying case
  (1)
• 3/4" hydraulic draw stud
  (3)

Consists Of 6

• 3/4" hydraulic draw stud
  (6)
• KCC-7672 carrying case
  (2)
• 1-1/8" hydraulic draw stud
  (4)
• KCC-QD2 carrying case
  (1)
• KCC-QDF2 carrying case
  (1)
• KCC-RW2 carrying case
  (2)
• KCC-LS2 carrying case
  (3)
• 18V Li-ion 2.0Ah Battery
  (1)
• (2) 18V Li-ion 3.0Ah Batteries
  (1)

Consists Of 7

• 1-1/8" hydraulic draw stud
  (6)
• KCC-7674 carrying case
  (3)
• 120V AC Charger
  (2)
• KCC-LS4 carrying case
  (1)

Consists Of 8

• KCC-17254 carrying case
  (2)
• KCC-7674 carrying case
  (2)
• KCC-LS2 carrying case
  (2)
• (2) 18V Li-ion 3.0Ah Batteries
  (1)
• 18V Li-ion 2.0Ah Battery
  (1)

Consists Of 9

• 120V AC Charger
  (2)

Crimping Capacity

• Coax Compression Crimper crimps F, BNC, and RCA connectors
  (1)

Crimps

• No
  (1)

Electrical Accessory Type

• Tool
  (1)

Electrician Tool Application

• Stripping
  (1)

Electrician Tool Type

• Cable Stripper
  (2)

Handle Finish

• Plastic-Dipped
  (1)
• Comfort Grip; Plastic-Dipped
  (2)
• Plastic Dipped
  (1)

Handle Length

• 0 in
  (1)

Handle Material

• Steel
  (1)
• Plastic
  (1)

Height

• 8.3 in
  (1)

Included

• 18 Piece Tool Kit, 8" Long Nose Pliers, (Cat. No. J203-8N), 10" Pump Pliers, (Cat. No. J502-10), 10" Adjustable Wrench, (Cat. No. D507-10), #1 Phillips Screwdriver 3" Shank, (Cat. No. 603-3), #2 Wire Bending Phillips Screwdriver, (Cat. No. 603-4B), 1/4" Cabinet Tip Screwdriver 4" Shank, (Cat. No. 6054), 1/4" Cabinet Tip Screwdriver 6" Shank, (Cat. No. 605-6), 1/4" Nutdriver 3" Shaft, (Cat. No. 630-14), 5/16" Nutdriver 3" Shaft, (Cat. No. 630-516), #2 Square Screwdriver 4"Shank, (Cat. No. 662), 3/16" Cabinet Rapi Dri 6" Shaft, (Cat. No. 6706), 25' Double Hook Magnetic Tape Measure (Cat. No. 9225), 9" Lineman's Pliers, (Cat. No. J200048), 8" Angled Pliers, (Cat. No. 5165), 10 Pocket Tool Pouch, (Cat. No. 5165), 9" Journeyman Wire Pulling Pliers Heavy-Duty Side Cutting (Cat. No. J2000-9NETP), 10 to 18 Solid and 12 to 20 AWG Stranded Wire Stripper, (Cat. No. 11055), Protective Eyewear (Cat. No. 60053)
  (1)
• 603-4 #2 Phillips; 605-4 1/4" Cabinet Tip; 11055 Wire Stripper; D2000-9NE Heavy Duty Pliers; 5204 Belt; 5119 Tool Pouch
  (1)
• D2139NE 9" Lineman's Pliers; D2038 8" Long Nose Pliers; D248-8 8"Angled Head Diagonal-Cutters; 11045 Wire Stripper/Cutter; 603-4 Phillips: #2; 605-4 Cabinet Tip: 1/4"
  (1)
• D2139NETP 9" Lineman's Pliers with Fish Tape Pulling; D502-10 10" Pump Pliers; D2038 8" Long Nose Pliers; D248-8 8"Angled Head Diagonal-Cutters; 11045 Wire Stripper/Cutter; 603-3 Phillips: #1; 603-4 Phillips #2; 605-4 Cabinet Tip: 1/4"; 601-6 Cabinet Tip: 3/16"; 5720 12-Pocket Tool Pouch; 5705 Work Belt
  (1)

Includes

• 439AV 1-1/2 IN Conduit Size Punch. 440AV 1-1/2 IN Conduit Size Die. 441AV 2.000 IN Conduit Size Punch. 442AV 2.000 IN Conduit Size Die. 304AVBB 3/4 IN X 2-15/16 IN Draw Stud. 32012 Plastic Case
  (1)
• Includes 1-1/2" - 2" conduit size Slug-Buster punches and dies. 7/16" ball-bearing draw stud, 3/4" ball-bearing draw stud and KCC-BB2 carrying case.
  (1)

Jaw Length

• 0.85" (2.2 cm)
  (1)

Length

• 8.3 in
  (1)

Magnetic

• No
  (1)

Manufacturer Warranty

• Limited Lifetime
  (4)

Material

• Adjustable Web Belt
  (1)
• Steel, Nylon, ABS Plastic
  (3)
• Steel
  (6)
• Induction Hardened Steel
  (7)
• polyester
  (1)
• Nylon
  (1)
• Carbide Tip
  (2)
• Punch up to 10 ga mild steel or 12 ga stainless steel.
  (11)
• Punch up to 10 ga mild steel or 12 ga stainless steel
  (20)
• Punch up to 10 ga mild steel
  (2)
• Punch 2" conduit up to 10 ga mild steel or 12 ga stainless steel ;Driver capable of punching up to 4" conduit. See "instruction manual" for driver ratings.
  (1)
• Punch up to 10 ga mild steel or 12 ga stainless steel. See driver instruction manual for complete capacity rating.
  (1)
• Leather
  (1)
• ABS Plastic, Steel
  (1)

Maximum Capacity

• 10 GA Mild Steel
  (1)

Overall Depth

• 3 in
  (1)

Overall Height

• 11 in
  (1)

Overall Length

• 12.875" (32.7 cm)
  (1)
• 12" (30.5 cm)
  (1)
• 6.75" (17.1 cm)
  (1)
• 12.5" (31.8 cm)
  (1)
• 12.5" (31.8cm)
  (1)
• 10.25" (26 cm)
  (1)
• 11.63" (29.5 cm)
  (3)
• 14" (35.6 cm)
  (1)
• 2" (5.1 cm); 1.38" (3.5 cm)
  (1)
• 8.3 in
  (1)

Overall Width

• 5.38" (13.7 cm)
  (1)
• 12.25" (31.1 cm)
  (1)
• 0.48" (1.2 cm)
  (1)
• 7 in
  (1)

Pocket Count

• 13
  (1)

Shoulder Size

• Case accommodates 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm)
  (1)

Size

• 3 IN
  (1)
• 20 IN
  (1)
• 2-1/2" - 4" conduit size knockouts (hole size: 2.91" - 4.54" or 74.0 mm - 115.4 mm)
  (1)
• 1/2" - 4" conduit size knockouts (hole size: 0.89" - 4.54" or 22.5 mm - 115.4 mm)
  (6)
• Case accommodates 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm)
  (7)
• 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm)
  (11)
• 1/2" - 1-1/4" conduit size knockouts (hole size: 0.89" - 1.70" or 22.5 mm - 43.2 mm)
  (2)
• 1-1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm)
  (2)
• Sizes are specific to each product.
  (1)
• 10 x 7 x 13"
  (2)
• 7 x 6 x 10-1/2"
  (2)
• 5 x 2-3/4 x 9"
  (1)
• 6 x 3-1/2 x 11"
  (1)
• 13 x 5.85 x 4.4"
  (1)
• 12.4 x 10.6 x 2.4"
  (1)
• 13.3 x 7.2 x 3.9"
  (1)
• 15.3 x 14.6 x 1.8"
  (1)
• 10 x 8 x 3"
  (2)
• 1/2" and 3/4" conduit size and 30.5 mm knockouts (0.89" and 1.12" or 22.5 mm and 28.3 mm)
  (1)
• 1/2" - 3" and 4" conduit size knockouts
  (1)
• 17 x 10 x 20-1/2"
  (1)
• 21 x 11 x 11"
  (1)
• 11 x 8.5 x 17"
  (1)
• Punch up to 10 ga mild steel or 12 ga stainless steel
  (1)
• 1/2" - 3" and 4" conduit size knockouts (hole size: 0.89" - 3.54" and 4.54" or 22.5 mm - 89.9 mm and 115.4 mm)
  (2)
• 6 in
  (1)

Size_Name

• 18 Piece
  (1)

Standard

• N.I.S.T. Traceable Calibration Certificate Meeting ASME Standard of +/- 4%
  (1)
• RoHS
  (1)
• RoHS Compliant
  (1)
• IEC 60900 And ASTM F1505, OSHA 1910.331-335, NFPA 70E And CSA-Z462
  (1)

Tool Belt Type

• N/A
  (1)

Type

• Electricians Tool Set
  (2)
• Master Electrician's Torque Wrenches
  (1)
• Tool Kit
  (3)
• Journeyman Tool Set
  (1)
• Trim-Out Tool Kit
  (1)
• Apprentice Tool Set
  (3)
• Ironworker's Plier
  (1)
• American Legacy Wire Stripper Lineman Kit
  (1)
• American Legacy Wire Stripper Diagonal Kit
  (1)
• Pliers and Wire Stripper Set
  (1)
• Insulated Set
  (4)
• Pliers
  (2)
• Dk Brown Pouch
  (1)
• Multimeter Kit
  (1)
• Meter Kit
  (1)
• Telco/Data
  (1)
• Combination TelCom
  (1)
• Economy 10Base-T
  (1)
• Premium Tool
  (1)
• Technicians
  (1)
• Large Mouth
  (1)
• Electrician's
  (2)
• Conduit Combo Pack
  (1)
• Economy
  (1)
• Hole Cutter Kit
  (1)
• Master Electrician's Hole Cutter Kit
  (1)
• Recessed Light Kit
  (1)
• RF Coax
  (1)
• Data/Voice RJ-45/RJ-11 Crimp Tool Kit
  (1)
• Hydraulic Knockout Set
  (2)
• 11-Ton Hydraulic Knockout Kit with Foot Pump
  (2)
• 8-Ton Hydraulic Knockout Driver
  (3)
• 8-Ton Hydraulic Knockout Kit
  (3)
• 11-Ton Hydraulic Knockout Driver with Hand Pump
  (1)
• 11-Ton Hydraulic Knockout Kit with Hand Pump
  (6)
• Manual Knockout Set
  (2)
• Knockout, Standard Round
  (1)
• Hydraulic
  (1)
• Hand tools for electricians 17 piece
  (1)
• Hand tools for electricians, 12 piece
  (1)
• Electrician's starter tool kit 5 piece
  (1)
• Journeymans tool kit metric 21 piece
  (1)
• Electricians metric tool kit 16 piece
  (1)
• Installation 5 piece kit
  (1)
• Electricians 4 piece basic tool kit
  (1)
• Professional grade driver bits with 1/4" quick change technology.
  (1)
• 7-Ton Battery-Hydraulic Knockout Kit
  (2)
• Insulated 7 piece tool kit
  (1)
• Apprentice 6 piece tool kit
  (1)
• LS50L2 Driver and Case
  (1)
• Electric GFCI test kit for voltage and wiring testing
  (1)
• Electric test kit for voltage and wiring testing
  (1)
• Intelli-PUNCH 11-Ton Battery-Hydraulic Knockout Kit
  (3)
• Backpack with 28 piece electricians tool kit
  (1)
• Electricians 28 piece tool kit
  (1)
• Electrician's 17 piece tool kit
  (1)
• 1/2" - 2" conduit size knockout upgrade set (driver sold separately)
  (3)
• 1/2" - 4" conduit size knockout upgrade set (driver sold separately)
  (2)

Weight

• 9.6 lb (4.3 kg)
  (1)
• 9.6 lb (4.4 kg)
  (1)
• 17.25 lb (7.8 kg)
  (1)
• 22.24 lb (10.1 kg)
  (1)
• 6.9 lb (3.1 kg)
  (1)
• 6.83 lb (3.1 lb)
  (1)
• 0.15 lbs
  (1)

Width

• 5 INCHES
  (1)
• 2.3 in
  (1)

Manufacturers