Electrician kits

Accessory Type

• 7-Ton Battery-Hydraulic Knockout Kit
  (1)

Base Size

• Case accommodates 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm)
  (1)

Consist Of 1

• 746A Ram and 1725 Foot Pump
  (1)
• Quick Draw Flex knockout driver
  (1)
• 746A Ram and 767 Hand Pump
  (1)
• Quick Draw 90 knockout driver
  (1)
• Quick Draw knockout driver
  (1)
• KRW-1 High-leverage ratchet wrench
  (1)
• GT-12A voltage tester. Torpedo level. 18 oz electrician's hammer. 25' tape measure. Keystone tip square shank 1/4 x 4" flat blade screwdriver. Keystone tip square shank 3/16 x 6" flat blade screwdriver. Phillips tip #1 - 3/16 x 3" screwdriver. Phil
  (1)
• 25' tape measure. Keystone tip square shank 1/4 x 4" flat blade screwdriver. Phillips tip #1 - 3/16 x 3" screwdriver. Phillips #2 x 4" screwdriver. Side cutting 9" pliers. Pro Plus wire stripper. Pump pliers 10". Long nose pliers 8". Diagonal cut
  (1)
• Heavy-duty 4 pocket leather pouch. Phillips tip #2 - 1/4 x 4" screwdriver. Cabinet tip round shank 3/16 x 6" flat blade screwdriver. Pro Plus wire stripper 10-18 AWG. Side cutting pliers 9".
  (1)
• Side cutting pliers 9" with molded grip. Diagonal pliers 8" with molded grip. Long nose pliers 8" with molded grip. Pump pliers 10" with molded grip. NM cable ripper. Flat Key screwdriver 1/4 x 4". Flat cabinet screwdriver 3/16 x 6". Phillips screw
  (1)
• High leverage diagonal cutting pliers 8" with molded grip. High leverage side cutting long nose pliers 8" with molded grip. Pump pliers with molded grip 10". Heavy duty keystone tip screwdriver. High leverage side cutting pliers 9" with molded grip.
  (1)
• Leather 5 pocket pouch. Wire stripper. Side cutting pliers 9". Terminal crimping tool. 6-in-1 multi tool.
  (1)
• Long nose dipped grip pliers 8". Wire stripper. 6-in-1 multi-tool. 4 pocket polyester pouch.
  (1)
• High speed titanium coated drill bit set. Masonry drill bit set. Magnetic nut driver set. Quick change chuck. Magnetic bit extension. Security driver bit set. Total pieces 68.
  (1)
• LS50L2 knockout driver
  (2)
• Insulated diagonal cutting pliers 8". Insulated long-nose pliers 8". Insulated pump pliers 10". Insulated cabinet tip screwdriver 1/4 x 4". Insulated phillips tip screwdriver #2 x 4". Custom tool roll-up carrier.
  (1)
• Long nose pliers 8". Diagonal cutting pliers 8". High leverage side cutting pliers 9". Cabinet tip slotted screwdriver 1/4 x 4". Phillips screwdriver #2 x 4". ProPlus wire stripper 10-18 AWG.
  (1)
• DM-25, GT-11, GT-10GFI in a zippered case.
  (1)
• DM-25, GT-11, GT-10 in a zippered case.
  (1)
• Intelli-PUNCH knockout driver
  (2)
• Professional tool backpack. 9" side cutting pliers with molded grip. 8" diagonal pliers with molded grip. 8" long nose pliers with molded grip. 10" pump pliers with molded grip. SS wire stripper. NM cable ripper. SS stripping/crimping combo tool. Ca
  (1)
• GT-12A voltage tester. Torpedo level. 18 oz electrician's hammer. 25' tape measure. Keystone tip square shank 1/4 x 4" flat blade screwdriver. Cabinet 3/16 x 6" flat blade screwdriver. Phillips tip #1 - 3/16 x 3" screwdriver. Phillips #2 x 4" scre
  (1)

Consist Of 2

• 7/16" short hydraulic draw stud
  (3)
• 7/16" hydraulic draw stud
  (5)
• KCC-LS2 carrying case
  (1)
• 1/2" and 3/4" conduit size and 30.5 mm Slug-Buster punches
  (1)

Consist Of 3

• 3/4" short hydraulic draw stud
  (3)
• 3/4" hydraulic draw stud
  (5)
• 1/2" and 3/4" conduit size and 30.5 mm dies
  (1)

Consist Of 4

• KCC-QDF2 carrying case
  (1)
• KCC-7672 carrying case
  (1)
• KCC-17254 carrying case
  (1)
• KCC-QD2 carrying case
  (2)
• 7/16" ball-bearing draw stud
  (1)
• 18V Li-ion 2.0Ah Battery
  (1)
• (2) 18V Li-ion 3.0Ah Batteries
  (2)

Consist Of 5

• 3/4" ball-bearing draw stud
  (1)
• 120V AC Charger
  (2)

Consists Of 6

• KCC-RW2 carrying case
  (1)
• KCC-LS2 carrying case
  (3)

Material

• Punch up to 10 ga mild steel or 12 ga stainless steel.
  (3)
• Punch up to 10 ga mild steel or 12 ga stainless steel
  (6)
• Punch 2" conduit up to 10 ga mild steel or 12 ga stainless steel ;Driver capable of punching up to 4" conduit. See "instruction manual" for driver ratings.
  (1)

Shoulder Size

• Case accommodates 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm)
  (1)

Size

• Case accommodates 1/2" - 2" conduit size knockouts (hole size: 0.89" - 2.42" or 22.5 mm - 61.5 mm)
  (7)
• 10 x 7 x 13"
  (2)
• 7 x 6 x 10-1/2"
  (2)
• 5 x 2-3/4 x 9"
  (1)
• 6 x 3-1/2 x 11"
  (1)
• 13 x 5.85 x 4.4"
  (1)
• 12.4 x 10.6 x 2.4"
  (1)
• 13.3 x 7.2 x 3.9"
  (1)
• 15.3 x 14.6 x 1.8"
  (1)
• 10 x 8 x 3"
  (2)
• 1/2" and 3/4" conduit size and 30.5 mm knockouts (0.89" and 1.12" or 22.5 mm and 28.3 mm)
  (1)
• 17 x 10 x 20-1/2"
  (1)
• 11 x 8.5 x 17"
  (1)

Standard

• IEC 60900 And ASTM F1505, OSHA 1910.331-335, NFPA 70E And CSA-Z462
  (1)

Type

• 8-Ton Hydraulic Knockout Driver
  (3)
• 11-Ton Hydraulic Knockout Driver with Hand Pump
  (1)
• Hydraulic
  (1)
• Hand tools for electricians 17 piece
  (1)
• Hand tools for electricians, 12 piece
  (1)
• Electrician's starter tool kit 5 piece
  (1)
• Journeymans tool kit metric 21 piece
  (1)
• Electricians metric tool kit 16 piece
  (1)
• Installation 5 piece kit
  (1)
• Electricians 4 piece basic tool kit
  (1)
• Professional grade driver bits with 1/4" quick change technology.
  (1)
• Insulated 7 piece tool kit
  (1)
• Apprentice 6 piece tool kit
  (1)
• LS50L2 Driver and Case
  (1)
• Electric GFCI test kit for voltage and wiring testing
  (1)
• Electric test kit for voltage and wiring testing
  (1)
• Intelli-PUNCH 11-Ton Battery-Hydraulic Knockout Kit
  (1)
• Backpack with 28 piece electricians tool kit
  (1)
• Electrician's 17 piece tool kit
  (1)

Manufacturers