Wire lug crimping tool

Accessory

• 10876 Die Set, RG 58/59/62/71, 10877 Die Set, 20-10 AWG Open Barrel Connectors
  (1)
• 52178 UPC 52178 120 V Charger
  (5)
• UA12T, UA12ID, UC26, UC40, UCACSR, UCUNC14, UCUN38, UCUN12
  (1)

Application - For Use On

• Use with MD6, MD7 Mechanical Crimpers
  (1)
• Copper Ferrules, Insulated and Uninsulated
  (1)
• Uninsulated Terminals and Splices
  (1)

Applied Force

• 11,240
  (1)
• 56,200
  (1)
• 13,490
  (1)
• 26,980
  (1)
• 29,225
  (1)

Average Charging Time

• 30-30
  (1)
• 15-15
  (1)

Batteries

• Lithium-Ion
  (9)

Battery

• Makita 18V 2.0AH
  (2)
• Makita 18V 3.0AH
  (2)
• 18 V, 3.0 AMP-HR Lithium-Ion
  (5)
• 18 V, 1.5 AMP-HR Lithium-Ion
  (5)
• 10.8V 1.5Ah Li-Ion
  (2)

Battery Capacity

• 3.0Ah
  (1)
• 1.5Ah
  (1)

Battery Charge Time

• 15 minutes
  (2)
• 22 minutes
  (2)
• 1 Hour
  (3)
• 1 HR
  (2)
• 30 MINT
  (3)
• 30 Minutes
  (2)
• 40 Minutes
  (2)

Battery Charger

• Makita 120V Battery Charger (DC18RC-X)
  (4)
• MBC110, MBC220, 110V or 220V CHARGER AVAILABLE
  (2)

Battery Life

• 4 Ah
  (1)
• 2 Ah
  (4)

Cable Size

• 10-22 AWG
  (5)
• 22-16 AWG; 16-14 AWG; 12-10 AWG
  (1)
• CAT3, CAT5e, CAT6/6A
  (1)
• Front Cavity: 22-16 AWG Insulated Terminals; Mid Cavity: 16-14 AWG Insulated Terminals; Rear Cavity: 12-10 AWG Insulated Terminals
  (1)

Cable Type

• CAT3, CAT5e, CAT6/6A
  (1)
• RG59, RG6/6Q
  (1)

Capacity

• Kwik Cycle 9 Die Sets
  (4)
• 4 AWG - 1000 kcmil copper or 6 AWG -1000 kcmil aluminum
  (1)

Color

• Red
  (3)

Color / Finish

• Black, Red
  (3)

Color*

• Black
  (1)

Conductor Size

• #10 Stranded - 600 kcmil Stranded
  (2)
• #10 Stranded - 500 kcmil Stranded
  (1)
• #6 Stranded - 1000 kcmil Stranded
  (1)
• #6 Stranded - 800 kcmil Stranded
  (2)
• #10 Solid - 3/16" Solid
  (1)

Connector Type

• RJ45 Klein Tools Pass-Thru, and RJ11, RJ12 Standard
  (1)
• F, BNC, RCA
  (1)
• Insulated
  (1)
• Ferrule
  (2)
• Non-Insulated
  (1)
• Heat Shrink
  (1)
• AL/CU
  (4)
• Miniterms
  (1)
• F
  (2)
• RJ45
  (1)
• RJ45, RJ11, RJ12, RJ22
  (1)
• Trapezoid
  (1)
• Service entrance connectors, C-taps, H-taps, overhead and underground connectors.
  (5)
• 3/8" male screw-type coupler
  (3)
• Service entrance connectors, H-Taps, Tension splices, Jumper splices, Stirrups, Color coded lugs & splices
  (36)
• Color-coded lugs and splices
  (112)
• #8-500 MCM Cu, #8-350 MCM AI, Aluminium H-taps up to 4/0-4/0
  (11)
• Copper connectors and wire from #8AWG to 750 kcmil (MCM) and aluminum connectors and wire from #8AWG to 500 kcmil (MCM)
  (1)
• Copper connectors and wire from #8AWG to 750 kcmil (MCM) and aluminum connectors and wire from #8AWG to 500 kcmil (MCM
  (3)

Crimp Cycle Time

• Pressing cycle time 3-4 seconds
  (4)
• 2 S
  (3)
• 2 Seconds
  (1)
• Approximately 2 Seconds
  (1)
• 3 seconds
  (3)
• 1.3 Sec
  (2)

Crimping Capacity

• 10-22 AWG Insulated and Non-Insulated Terminals
  (5)
• 10-22 AWG Non-Insulated Terminals
  (1)
• 10-22 AWG
  (2)
• 10-22 AWG Insulated, Non-Insulated Terminals, 7-8 mm Ignition Terminals
  (1)
• #6-4/0 AWG Battery Lugs and Terminals
  (1)
• 10-22 AWG Insulated and Non-insulated Terminals; B-Connectors; Scotchlok IDC Connectors
  (1)
• 10-20 AWG Stranded
  (1)
• 750 MCM
  (1)
• NA ton
  (44)
• 6.2 ton
  (1)
• 12 ton
  (1)
• 6 ton
  (1)
• 15 ton
  (1)
• 22-6 AWG
  (1)
• 26-13 AWG (0.140 - 2.500 SQ-MM)
  (1)
• Single Cable Wire Ferrules: 7-1/0 AWG (10.000 - 50.000 SQ-MM), Twin Wire Ferrules: 2 x 11- 2 x 5 AWG (2.000 x 4.000 - 2.000 x 16.000 SQ-MM)
  (1)
• 1/0 - 3/0 AWG (50.000 - 90.000 SQ-MM)
  (1)
• 25-10 AWG (0.140 - 6.000 SQ-MM)
  (1)
• Single Cable Wire Ferrules: 26-10 AWG (0.140 - 6.000 SQ-MM), Twin Wire Ferrules: 2 x 20 -2 x 13 AWG (2.000 x 0.500 - 2.000 x 2.500 SQ-MM)
  (1)
• Single Cable Wire Ferrules: 10-6 AWG (6.000 - 16.000 SQ-MM), Twin Wire Ferrules: 2 x 11 -2 x 10 AWG (2.000 x 4.000 - 2.000 x 6.000 SQ-MM)
  (1)
• 8 AWG - 250 kcmil copper color coded connectors, 8 AWG - 4/0 kcmil aluminum color coded connectors
  (1)
• 8-1 AWG Copper Color Coded Connectors
  (1)
• Press Copper and Steel Fittings up to 1-1/4'' (31.8 mm). Press PEX Fittings up to 1-1/2'' (38.1 mm)
  (2)
• Press copper and steel fittings up to 4'' (101.6 mm). Press PEX fittings up to 2'' (50.8 mm)
  (2)
• 22-10 AWG
  (2)
• Uses Kwik Cycle 9 Die Sets
  (2)
• 22-8 AWG
  (1)
• 22-10 AWG Insulated And Uninsulated Terminals And Splices
  (2)
• 22-10 AWG Insulated And Uninsulated Terminals And Splices, 26-8 AWG Wire Ferrules
  (1)
• 6 AWG - 500 KCMIL Copper Lugs And Copper Splices, 6 AWG - 400 KCMIL Aluminum Lugs And Aluminum Splices
  (5)
• Refer to crimping chart in instruction manual
  (3)
• 8 AWG - 1/0 AWG Copper
  (1)
• Connector 10-1/0 AWG 5/8 IN Service Entrance Connectors, 1/0-4/0 AWG 0.840 Service Entrance Connectors, 6 - 4/0 AWG Aluminum H Taps, 10-2 AWG Copper H Taps, 6-2/0 AWG Copper Tension Splices, 6-4/0 AWG All Aluminum Tension Splices, 4-1/0 AWG One Piece ACSR
  (36)
• 300 kcmil (MCM) Copper, 2/0 AWG Al
  (6)
• 600 kcmil (MCM) Copper, 350 kcmil (MCM) Al
  (23)
• 600 kcmil (MCM) Copper/350 kcmil (MCM) Al
  (1)
• 1000 Kcmil (MCM) Cu & Al
  (12)
• 750 Kcmil (MCM) Cu & Al
  (43)
• 1500 kcmil (MCM) Copper, 1250 kcmil (MCM) Al
  (6)
• Standard Strand, 500 kcmil (MCM) Copper, 350 kcmil (MCM) Al Fine Strand, 350 Kcmil (MCM) Copper DLO, 373.7 Kcmil (MCM) Copper
  (6)
• 500 kcmil (MCM) Copper, 400 kcmil (MCM) Al
  (6)
• 1 AWG - 250 kcmil
  (1)
• 750 Kcmil (MCM) Cu and Al
  (1)
• 600 kcmil (MCM) Cu, 350kcmil (MCM) Al
  (4)
• Standard Strand, 8 AWG - 500 kcmil Cu, 1/0 AWG - 350 kcmil Al, Fine Strand, 8 AWG - 350 Kcmil CuDLO, 8 AWG - 373.3 Kcmil Cu
  (4)
• #8-500 MCM Cu, #8-350 MCM AI, Aluminium H-taps up to 4/0-4/0
  (11)
• Copper connectors and wire from #8AWG to 750 kcmil (MCM) and aluminum connectors and wire from #8AWG to 500 kcmil (MCM)
  (1)
• Copper connectors and wire from #8AWG to 750 kcmil (MCM) and aluminum connectors and wire from #8AWG to 500 kcmil (MCM
  (3)
• F, BNC, and RCA compression connectors
  (2)
• Insulated 2218 AWG (Red), 1614 AWG (Blue), and 1210 AWG (Yellow) terminals
  (1)

Crimping Force

• 4.5 Tons
  (3)
• 12 Tons
  (1)
• NA ton
  (40)
• 6 Tons With CT-720 Tool
  (1)
• 6.2 ton
  (3)
• 14 Ton
  (3)
• NA
  (2)
• 12 ton
  (3)
• 6 ton
  (7)
• 15 ton
  (3)
• 1.8 tons
  (1)
• 1.25 tons
  (1)
• 9000.000 LB (40.000 KN)
  (4)
• 24000 LB
  (5)
• 30000 LB
  (1)
• Pressing Force 4,275 lbs (19kN)
  (2)
• Pressing Force 7,200 lbs (32kN)
  (2)
• 12400.000 LB (55.000 KN)
  (5)
• 2900.000 LB (13.000 KN)
  (5)
• 24,000 (106 kN)
  (2)
• 12,000 (54 kN)
  (1)
• 3,400 LB (15kN)
  (2)
• 12,000 lbs. (53 kN) LB
  (39)
• 7,900 lbs. (35 kN) LB
  (6)
• 12,000 lbs. (53 kN)
  (24)
• 30,000 lbs. (134 kN) LB
  (12)
• 24,000 lbs. (106 kN) LB
  (26)
• 24,000 lbs. (106 kN)
  (8)
• 24,000 lbs (106 kN)
  (2)
• Variable 3-6 Ton (30-60 kN) LB
  (6)
• 12,400 lbs. (55 kN) LB
  (12)
• 12,400 lbs (55kN)
  (1)
• 12,400 lbs. (55 kN)
  (7)
• Variable 3-6 Ton (30-60 kN)
  (4)
• 12,000 lbs (53 kN)
  (1)
• 6 Ton (53kN)
  (16)

Crimping Ranges

• #22 - #8 AWG
  (1)
• Copper: #8 AWG- #4/0 AWG
  (1)
• Copper: #8 AWG - #1 AWG
  (1)
• Copper: #8 AWG - 250 kcmil; Aluminum: #8 AWG to 4/0 AWG
  (1)
• Copper: 10 sol. - 500 Kcmil; Copper Flex: #8 to 350 kcmil
  (2)
• Taps: Copper: #10 sol. to 2/0 str., Aluminum & ACSR: #14 sol. to 4/0 ACSR; Stirrups: #6 to 4/0 ACSR; Overhead Full Tension Deadends, Full Tension Splices and Terminals: #10 str. to 4/0 ACSR; Installs Splices, Taps or Terminations: #8 to 500 kcmil Copper Stranded, #8 to 350 kcmil Copper Flex, #8 to 350 kcmil Aluminum
  (2)
• Aluminum: #10 AWG - #1/0 AWG
  (1)
• #8 Str. - 4/0 Str.
  (1)
• #8 Str. - 250 kcmil, 30 Navy - 250 Navy, #8 Str. - 4/0 Str
  (2)
• #10 - #6 AWG
  (1)
• Copper: #22 AWG - #10 AWG
  (1)
• Copper: #12 AWG - #2 AWG Stranded, Solid and Flex
  (1)
• Copper: #22 AWG - #10 AWG; Strips: #22 AWG - #10 AWG
  (1)
• Copper: #22 AWG - #10 AWG; Cable ties: 18-250 LB
  (1)
• #22 - #10 AWG
  (1)

Crimping Shape

• Hexagon
  (6)
• Circular
  (1)

Crimps

• Yes
  (2)

Cut Style

• Knife on Anvil
  (1)

Cuts

• Yes
  (10)

Cutting Capacity

• 10-22 AWG Insulated and Non-Insulated Terminals
  (3)
• 10-22 AWG Non-Insulated Terminals
  (1)
• 10-26 AWG Solid; 12-28 AWG Stranded
  (1)

Description - Long

• Full Cycle Ratchet Crimper, #22-10 AWG Vinyl Insulated.
  (1)
• Full Cycle Ratchet Hand Crimper, #26-#8 AWG.
  (1)
• Rotating Die, Full Cycle Ratchet Hand Crimper for #8 AWG - #1 AWG Copper terminals and splices, #14 - #4 AWG Copper Thin-wall C-Taps
  (1)
• Rotating Die, Full Cycle Ratchet Hand Crimper Kit, includes Y1MRTC crimper, high-impact sturdy metal carrying case, select connectors.
  (1)
• Rotating Die, Full Cycle Ratchet Hand Crimper Kit: Y1MRTC, carrying case, select connectors and YC4L12 Thin-wall C-Taps
  (1)
• Jaw Covers for MD6.
  (1)
• Installation Ratchet Crimper for Bare and Insulated Ferrules, #10 AWG - #6 AWG, 3 Grooves, Trapezoidal Crimp Profile
  (1)
• Wire Stripper and Cutter, Cuts #10-22 AWG CU Wire and Strips #10-22 AWG CU Wire. Patented guide.
  (1)
• Cable Tie and Wire cutter, Cuts #10-22 AWG CU Wire and 18-250 lb Cable Ties. Patented guide.
  (1)

Description - Short

• HYTOOL #14-4/0, Perm BG/D3, Composite
  (1)
• Full Cycle Ratchet, #22-10 for Bare
  (1)
• Ratchet Crimper, #22-8 AWG, Bare
  (1)
• Mechanical Rotating, #8-4/0 Copper
  (1)
• 840 POPPER Full Cycle Ratchet, OH/UG
  (1)
• HYTOOL #14-4/0, Permanent BG/D3
  (1)
• HYTOOL #14-4/0, Permanent D3 only
  (1)
• HYTOOL #14-4/0, Permanent O/D3
  (1)
• Dieless Full Cycle Ratchet, #10-1/0 AWG
  (1)
• Dieless Mech, 30 Navy-250 Navy CU Navy
  (2)
• Ergo Ratchet, #22-10, Nylon/Vinyl Conn
  (1)
• Ratchet Crimper, #12-2 Str, Solid, Flex
  (1)
• Full Cycle Ratchet, #22-10 for Nylon
  (1)

Die Type

• Permanent Die Grooves
  (1)
• Rotating Die Wheel
  (2)

Dies

• RKM2 series
  (2)
• RKML series
  (1)
• PKM4 series
  (1)
• RKM3 series
  (2)

Electrical Accessory Type

• Tool
  (3)

Electrician Tool Application

• Crimping
  (3)

Electrician Tool Type

• Crimper
  (3)

Emissivity

• 0.10 to 0.99 Adjustable
  (1)

Estimated Cycles per Charge

• 150
  (2)
• 300
  (2)
• 400
  (5)
• 250
  (2)

EU RoHS Indicator

• Yes
  (2)

FEATURES - Bullets

• Heavy gauge steel cover / body;Rugged clasp and handle provide long carry case life;Individual compartments hold a variety of connectors, cover prohibits spillage of connector contents when closed;Foam insert contains Y1MR HYTOOL and helps to protect tool from impact if case is dropped;Kit identification label outlines kit contents and provides connector installation information
  (2)
• Laminated vinyl jaw covers, supplied as set;Compact, snap in place easily;Fits all styles except Snub-Nose variations
  (1)
• Permanent die sets;Heavy duty forged steel frame;Full cycle ratchet mechanism;Emergency release;Comfort grip handles
  (1)

Finish

• Phosphated, polished and tempered for increased durability and corrosion resistance
  (1)

Handle Color

• Black
  (3)
• Red/Black
  (3)
• Red
  (6)
• Orange
  (9)
• Blue
  (5)
• Yellow/Black
  (1)
• Gray/Yellow
  (1)
• Gray/Red
  (1)
• Red, Black
  (1)
• Blue/White
  (1)
• Orange/Light Gray
  (1)
• Black/Grey
  (2)
• Yellow
  (4)
• Green
  (1)
• Black / Orange
  (13)
• Black / Blue
  (1)

Handle Finish

• Molded Grips
  (2)
• Double Dipped
  (1)

Handle Length

• 4.5" (114.3 mm)
  (1)

Handle Material

• High-Dielectric Plastic Cushion Grip
  (1)

Handle Type

• Fiberglass
  (4)
• Steel
  (2)
• Double Molded Grip
  (2)
• Palm Grip
  (53)
• Double Cushioned And Molded Grip
  (1)
• Cushioned Grip
  (1)
• Standard And Dipped Grip
  (1)
• Molded
  (1)
• Rubber Overmold
  (2)
• In-Line Style with over molded rubber grip
  (89)
• Pistol Style with over molded rubber grip
  (72)
• Locking extendable handles with four length sizes
  (1)

Height

• 2" (51mm)
  (2)
• 9 IN
  (2)

Included

• Crimper; BG Fixed Die and D3 Groove Head; (2) 4 Ah Batteries; Charger; Carry Bag
  (1)

Includes

• D3 And O Die Grooves
  (1)
• D3 And BG Die Grooves
  (1)
• Cutter And Replaceable Stripper Blade Set
  (1)
• Pistol Grip Press Tool(32kN). 1 Carrying case.
  (1)
• Die
  (3)
• Kearney O And 5/8 Die Grooves
  (1)
• Kearney D And O Die Grooves
  (1)
• 10873, 10874 And 10875 Die Sets
  (1)
• 230 VAC Adapter
  (1)
• Heavy duty canvas bag
  (3)
• 1 Pistol Grip Press Tool (32kN). 6 Pressing Jaws - 1/2'', 3/4'', 1'', 1-1/4'', 1-1/2'', & 2'' (12.7 mm, 19.1 mm, 25.4 mm, 31.8 mm, 38.1 mm, & 50.8 mm) for Copper and Steel. 2 Makita 18V 3.0AH. Makita 120V Battery Charger (DC18RC-X). 1 Carrying case.
  (1)

Insulated

• No
  (1)

Jaw

• None included in this kit
  (1)
• Works with CJD3BG, CJD3O, CJD3, CJK, CJB, CJXPJ, CJ22
  (1)
• 1/2'' (12.7 MM), 3/4'' (19.1 MM), 1'' (25.4 MM), 1-1/4'' (31.8 MM) jaw for copper and steel.
  (1)
• 1/2'' (12.7 MM), 3/4'' (19.1 MM), 1'' (25.4 MM), 1-1/4'' (31.8 MM), 2'' (50.8 MM) Jaw for Copper and Steel
  (1)

Jaw Length

• 1.35" (3.4 cm)
  (1)

Jaw Thickness

• 0.875" (22.2 mm)
  (1)

Joint Type

• Hot-Riveted
  (2)
• Hot Riveted
  (1)

Knife Length

• 0.75 (1.9 cm)MaterialSteelNose TypeUniversalOverall Length8.78 (22.3 cm)
  (1)
• 0.625 (1.6 cm)MaterialSteelNose TypeSquareOverall Length9.13 (23.2 cm)
  (1)

Large Size

• 29/32 and 1-3/32
  (1)

Length

• 7 in
  (1)
• 5.75-5.75
  (1)
• 146-146
  (1)

Lithium Battery Package

• Included in Product
  (1)

Manufacturer Warranty

• Limited Lifetime
  (3)

Material

• Plastic
  (1)
• ABS/PC, Electronic Components
  (1)
• Induction Hardened Steel
  (2)
• Forged Steel
  (5)
• Steel with Black Oxide
  (2)
• Steel
  (22)
• ABS, PA6, GF, TPE
  (10)
• Fiberglass - Steel
  (3)
• Rugged Cast Steel
  (1)
• Steel/Oxide Finish
  (2)
• Soft Rubber
  (3)
• NA
  (2)
• Various Materials
  (3)
• Alloy Steel
  (1)
• Wood
  (1)
• Metal
  (2)
• Hardened Tool Steel
  (1)
• 120V Charger, Two 4.0Ah Batteries
  (2)
• 230V Charger, Two 4.0Ah Batteries
  (2)
• Bare tool configuration
  (2)
• 12V Charger, Two 4.0Ah Batteries
  (2)
• Rubber, Steel
  (3)

Material Master Number

• EK50ML120B
  (1)
• EK50ML138B
  (1)

Maximum Cable Capacity (ACSR)

• 556 MCM
  (1)

Maximum Cable Capacity (Aluminum)

• 8 AWG to 750 MCM
  (1)
• 1000 MCM Cut; 350 Crimp
  (1)
• 350 MCM
  (5)
• 1000 MCM Cut; 350 MCM Crimp
  (1)

Minimum Pack Quantity

• 1
  (2)

Opening Size

• O
  (1)
• RG6
  (1)
• CAT3, CAT 5e, CAT 6
  (1)
• NA In.
  (24)
• 2.2 In.
  (5)
• 1.46 In.
  (1)
• 1.65 In.
  (1)
• 1.128 In.
  (1)
• 0.572 In.
  (1)
• 1.65 IN
  (4)
• 1.4 IN
  (1)
• 1.65 IN (42 mm)
  (18)
• 1.2 IN (30 mm)
  (6)
• Flip top head
  (4)
• Open Load Head
  (4)

Overall Height

• 6.578" 16.7 cm)
  (1)
• 12" (30.5 cm)
  (7)
• 0.73" (1.9 cm)
  (1)

Overall Length

• 25 in
  (2)
• 8.88 in
  (3)
• 10.75 in
  (1)
• 10.56 in
  (1)
• 26 in
  (2)
• 10 in
  (2)
• 17.85 in
  (2)
• 13 in
  (1)
• 25.38 in
  (2)
• 24.5 in
  (1)
• 12 in
  (3)
• 22.65 in
  (3)
• 10.38 in
  (2)
• 20.4 in
  (1)
• 21.3 in
  (2)
• 7.75 in
  (1)
• 10.68 in
  (1)
• 6.63 in
  (2)
• 9" (22.9 cm)
  (5)
• 9.8" (24.9 cm)
  (1)
• 9.6" (24.4 cm)
  (2)
• 10" (25.4 cm)
  (1)
• 7.75" (19.7 cm)
  (3)
• 8.5" (21.6 cm)
  (1)
• 8.25" (21 cm)
  (1)
• 19.5" (49.5 cm)
  (1)
• 6.094" (15.5 cm)
  (1)
• 9" (22.9 cm)
  (1)
• 9.0" (23 cm)
  (1)
• 22.625" (57.5 cm)
  (2)
• 26" (66 cm)
  (8)
• 8" (20.3 cm)
  (1)
• 9.83" (25 cm)
  (1)
• 7" (18 cm)
  (2)
• 21
  (2)
• 16 IN
  (1)
• 23.62 IN
  (1)
• 23 IN
  (1)
• 8.27 In.
  (4)
• 8.56 In.
  (1)
• NA In.
  (3)
• 10.8 In.
  (5)
• 12.6 In.
  (5)
• 10.6 In.
  (2)
• 2.47 In.
  (1)
• 7.67 In.
  (1)
• 8.25 In.
  (1)
• 20.7 In.
  (1)
• 25 In.
  (1)
• 26 In.
  (1)
• 15 In.
  (1)
• 12.25 In.
  (1)
• 16.8 In.
  (1)
• 22.1 In.
  (2)
• 13 In.
  (1)
• 8.5 In.
  (2)
• 0.34 In.
  (1)
• 12 In.
  (1)
• 14.5 In.
  (1)
• 28.57 In.
  (1)
• 15.71 In.
  (1)
• 9.5 In.
  (7)
• 4 In.
  (1)
• 10.25 In.
  (1)
• 8.27 in
  (1)
• 12 in , 305 mm
  (1)
• 12.4 in
  (1)
• 14 in , 356 mm
  (1)
• 11 in
  (1)
• 13.5 in
  (3)
• 10 in , 254 mm
  (1)
• 27.75 in , 628.25 mm
  (1)
• 10.46 in
  (11)
• 9.6 in , 243.84 mm
  (2)
• 8 in
  (1)
• 10.4 in
  (1)
• 9.125 in , 231.77 mm
  (1)
• 14.25 in , 361.95 mm
  (1)
• 6 in
  (1)
• 11-1/2 in
  (1)
• 21 in , 533.4 mm
  (1)
• 21 in
  (5)
• 14.5 in
  (1)
• 23.75 in
  (1)
• 10.25 in
  (1)
• 10.13 in
  (1)
• 10.43 in , 265 mm
  (1)
• 25-3/8 IN (645.000 MM)
  (4)
• 12.800 IN (325.000 MM)
  (1)
• 6.900 IN (175.000 MM)
  (2)
• 13.200 IN (335.000 MM)
  (2)
• 8.400 IN (213.000 MM)
  (1)
• 8.900 IN (225.000 MM)
  (1)
• 15 IN
  (1)
• 10-1/2 IN
  (1)
• 22-3/8 IN
  (1)
• 10.000 IN (273.000 MM)
  (1)
• 9.000 IN (23.000 CM)
  (2)
• 9-1/2 IN (241.000 MM)
  (2)
• 14.000 IN (355.000 MM)
  (5)
• 12-3/4 IN (324.000 MM)
  (5)
• 9-3/4 IN (24.800 CM)
  (1)
• 13" (330mm)
  (1)
• 12.75" (324mm)
  (1)
• 15" (381mm)
  (1)
• 9"
  (3)
• 15-3/4 IN
  (1)
• 18.5 IN (470mm)
  (28)
• 13.25 IN (337mm)
  (6)
• 15.75 IN (438mm)
  (12)
• 19.625 IN (498mm)
  (6)
• 16.25 IN (413 mm)
  (18)
• 15.5 IN (394 mm)
  (5)
• 15.75 IN (400mm)
  (6)
• 14 IN (355mm)
  (6)
• 14.875 IN (378mm)
  (6)
• 16.5 IN (420mm)
  (12)
• 14.75 IN (375mm)
  (6)
• 19 IN (482mm)
  (19)
• 17 IN (432mm)
  (4)
• 16 IN (406mm)
  (4)
• 21"
  (9)
• 13.5"
  (1)
• 10"
  (2)
• 20"
  (3)

Overall Width

• 2.56" (6.5 cm)
  (1)

Package Contents

• Tool only
  (3)

Packaged Weight

• 13.41
  (1)
• 14.33
  (1)
• 14.12
  (1)
• 9.5
  (2)

Pallet Quantity

• 2400
  (2)

Product Name

• Jaw Covers for MD6 Series Crimpers, Laminated Vinyl
  (1)
• Installation Ratchet Crimper for Bare and Covered Ferrules, #22 AWG - #10 AWG, Dieless wth Square Crimp Profile
  (1)
• HYTOOL Hand-Operated Crimper, Polymer Handles, #14 - 4/0 AWG, Permanent O and D3 grooves
  (1)
• Full Cycle Ratchet Hand Crimper, #26 AWG - #8 AWG, N Die
  (1)

Product Type

• Ratchet and Small Hand Tools
  (2)
• MY Series
  (1)

Replacement Part

• 10873 Die Set, 22-10 AWG Insulated Terminals, 10874 Die Set, 22-10 AWG Uninsulated Terminals, 10875 Die Set, 26-8 AWG Wire Ferrules
  (1)
• 52176 UPC 52176 18 V 3.0 AMP-HR Li-ion Battery, 10118 UPC 10118 Carrying Case, 12274 UPC 12274 Carrying Strap, 52178 UPC 52178 120 V Charger, 52179 UPC 52179 12 V Charger, 52180 UPC 52180 230 V Charger
  (5)
• 52177 UPC 52177 18 V 1.5 AMP-HR Li-ion Battery, 25752 UPC 25752 Carrying Case, 52178 UPC 52178 120 V Charger, 52179 UPC 52179 12 V Charger, 52180 UPC 52180 230 V Charger
  (4)
• 52177 18 V 1.5 Ah Li-ion Battery, 25752 Carrying Case
  (1)

Rotation

• Head rotation 350 degrees
  (3)
• 350&#176
  (2)
• 350 DEG
  (2)

Screw Shearing

• 4-40, 6-32, 8-32, 10-24, 10-32
  (2)
• 4-40, 5-40, 6-32, 8-32, 10-32, 10-24
  (1)

Short Description

• BARE CRIMPING TOOL, EK50ML120B
  (1)
• BARE CRIMPING TOOL, EK50ML138B
  (1)

Size

• 4.74 in
  (1)
• 9.03 in
  (1)
• 8.54 in
  (1)

Size_Name

• 10-20 AWG Solid, 12-22 AWG Stranded
  (1)

Standard

• IEC 60900 and ASTM F1505
  (2)
• UL Listed
  (1)
• CSA Certified, UL Listed
  (5)
• UL Listed Certified
  (2)
• IEC/EN 62841-1
  (1)
• UL E9809
  (5)
• C/US UL Listed
  (131)
• ASTM F1505-07
  (1)
• C/US UL Listed *UL and cUL classified with Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors. The products listed above are registered trademarks of Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and
  (1)
• UL and cUL Classified to 7 major lug brands -Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors (Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union are trademarks or registered trademarks
  (1)
• C/US UL Listed, CE Listed
  (1)
• C/US UL Listed, IEC 62481-1; VDE, CSA, MET Tested
  (4)
• C/US UL Listed, IEC 62481-1, VDE, CSA, MET Tested
  (12)
• C/US UL Listed, IEC 62481-1, VDE, CSA, MET Tested
  (1)

Standards - RoHS Compliance Status

• EX
  (14)
• UI
  (1)

Strips

• Yes
  (2)

Strips and Cuts

• 10-20 AWG Solid, 12-22 AWG Stranded
  (1)

System

• Manual
  (2)
• Battery-powered hydraulic
  (2)
• Foot pump hydraulic
  (1)
• Hand hydraulic
  (2)

Tether Capable

• Yes
  (1)

Tool Type

• Hand Operated Crimper
  (4)
• Full Cycle Ratchet Crimper
  (7)
• Mechanical Rotating Crimper
  (1)
• Full Cycle Ratchet Crimper, Dieless
  (1)
• Mechanical Dieless Crimper
  (2)
• Ratchet Crimper for Ferrules
  (2)
• Stripper/Cutter
  (1)
• Cable Tie and Wire Cutter
  (1)

Trade Name

• HYTOOL
  (5)

Type

• Crimpers
  (24)
• MD6/MD7, Protective Jaw Covers
  (1)
• Crimper
  (4)
• Wire Stripper/Cutter
  (1)
• Cutter
  (1)
• Kit
  (1)
• Journeyman Combination Pliers
  (1)
• Ironworker's Pliers
  (1)
• F, BNC, RCA Compression Connectors to Coax
  (1)
• Multi Tool
  (1)
• Dual Wire Cutter Crimper Stripper
  (1)
• Ratcheting Crimper
  (5)
• Battery Operated
  (10)
• Multi-Tool Wire Stripper
  (1)
• Combination Cutter Crimper
  (1)
• Mechanical Crimping Tool
  (3)
• Insert Die
  (1)
• Ratchet Drive Crimper
  (1)
• 12-Ton Compression Tool for U-Type Dies
  (1)
• Kits
  (1)
• Compression
  (2)
• compression crimp
  (4)
• Hand Operated Indentor
  (1)
• Controlled Cycle Crimp Tool
  (17)
• Reel-Fed Strip and Crimp Ferrule Tool
  (2)
• Hand Crimp Tool
  (7)
• Manual Crimping Tool with 7 Die Sets
  (1)
• Hydraulic Crimp Head
  (8)
• Tools - Hydraulic
  (1)
• Hydraulic Pump Hose
  (2)
• Manual Crimp Tool
  (40)
• Electric Hydraulic Pump
  (1)
• Crimping Tool
  (4)
• Universal: Cut-Crimp-Punch, Litium-Ion Battery Powered Hydraulic, 12-Ton, Crimping Tool
  (1)
• Hydraulic Pump
  (5)
• Remote Control Handle
  (1)
• Remote Foot Switch
  (1)
• Crimping Pump
  (1)
• Pump Accessories
  (1)
• Crimp Press
  (1)
• In-Line Pressure Gauge for Hydraulic Pump
  (1)
• Applicator - Reel Fed
  (2)
• Carrying Case
  (1)
• Bench Press
  (1)
• Crimp Hand Tool
  (2)
• Pneumatic Power Crimp Tool
  (3)
• Metric Compression Tools
  (1)
• Power Assisted Compression Tools
  (4)
• Hydraulic Pumps
  (5)
• Hand Tool
  (2)
• Hydraulic Power Crimp Tool
  (5)
• Hand Crimping Tool
  (9)
• Ratchet Crimping Tool
  (2)
• Manual Tool
  (4)
• Installation Tool
  (1)
• Hydraulic Crimping Head
  (1)
• Hydraulic Compression Tool
  (1)
• Cutting Dies and other Tools
  (1)
• Auto-feed Pnuematic Crimp Tool
  (1)
• Hand Control
  (2)
• Hydraulic Head
  (1)
• Manual Compression Tools
  (2)
• Manual Compression Tool
  (1)
• Mechanical Crimp Tool
  (3)
• Cable Strippers, Cutters and other Tools
  (1)
• Ratcheting Compression Crimp Tool
  (1)
• Manual and Power-assisted Compression Tools
  (1)
• Mechanical Compression Tool
  (4)
• Ergonomic Hand Crimp Tool
  (1)
• PowerTap Tools and Accessories
  (4)
• Hydraulic Gage
  (1)
• Application Tools
  (1)
• Metal Case
  (1)
• Crimp Tool
  (1)
• Hand Switch
  (1)
• Foot Switch
  (1)
• Tool and Die Kit
  (1)
• Mechanical Single Indent Dieless Crimp Tool
  (1)
• Crimping Compression Tools
  (10)
• Manual
  (4)
• Trapezoidal
  (5)
• Square
  (1)
• 12 ton crimping head, remote powered
  (1)
• 15 ton crimping head, remote powered
  (1)
• Manual hydraulic quad point dieless crimping tool with open head
  (1)
• Remote Powered Quad Point, Open Head Dieless
  (1)
• Manual hydraulic quad point dieless crimping tool with flip top head
  (1)
• Crimping head, quad-point, open head, dieless and remote powered
  (1)
• Manual hydraulic 12 ton crimping tool
  (2)
• Manual crimper
  (1)
• Manual hydraulic 12 ton crimping tool. PVC coated
  (1)
• 12 ton crimping head, PVC covered, remote powered
  (1)
• Interchangeable
  (3)
• Crimping jaw unit for Kearney O dies
  (1)
• Crimping jaw unit with single D die groove for W style dies.
  (1)
• Knockout
  (1)
• Crimping jaw unit with single D and BG die groove for W style dies.
  (1)
• Crimping jaw unit with single D and O die groove for W style dies.
  (1)
• Crimping jaw unit with Nicopress X, P and J die grooves
  (1)
• Terminal
  (7)
• Hand hydraulic dieless crimping tool
  (1)
• Premium Terminal
  (1)
• Battery Powered, Open Rubber Covered Head, Quad Point Dieless
  (3)
• Battery Powered, Quad Point Dieless
  (2)
• Insulated Terminal
  (1)
• Battery Powered
  (1)
• Bare Tool
  (1)
• Mechanical
  (1)
• Die style crimper
  (81)
• Dieless style crimper
  (32)
• Die style crimper/cutter
  (20)
• K Series
  (1)
• 6 Ton Crimping
  (3)
• Die style crimper/cutter/punch
  (4)
• 4-Point Indent Crimping
  (1)

Voltage

• 20V
  (1)

Voltage Rating

• 300 V
  (3)

Warranty

• 5 year limited warranty
  (23)
• 2 year limited warranty
  (1)
• 1 Year
  (4)

Weight

• 1.3 lb (0.6 kg)
  (3)
• 24.5 lb (11.1 kg)
  (1)
• 11.2 oz (318 g)
  (1)
• 12.8 oz (363 g)
  (2)
• 7.100 LB (3.200 KG)
  (4)
• 0.300 LB (136.000 GM)
  (1)
• 0.400 LB (0.200 KG)
  (1)
• 1.800 LB (0.800 KG)
  (2)
• 1.100 LB (0.400 KG)
  (3)
• 1.400 LB (0.600 KG)
  (1)
• 1.100 LB (500.000 GM)
  (1)
• 1.050 LB (0.480 KG)
  (3)
• 1.350 LB (0.600 KG)
  (1)
• 12.000 LB (5.400 KG)
  (5)
• 3-1/2 LB (1.600 KG)
  (5)
• 9.75 lbs. (4.42kg)
  (2)
• 1.7 LB
  (2)

Weight With Jaws

• 4 lbs. (1.8kg)
  (1)

Width

• 2-7/8 IN (73.000 MM)
  (5)
• 3.75" (95mm)
  (1)
• 4.25" (108mm)
  (1)
• 2" (51mm)
  (1)
• Crimp Head : 3-1/8 ( 79.375mm) IN
  (1)

Width Head Open

• 4" (108mm)
  (1)
• Crimp Head : 3-5/8 ( 92.075mm) IN
  (1)

Wire Size

• #10 AWG to #6 AWG
  (1)
• 6-1/0 AWG Un-Insulated - 22-8 AWG Insulated
  (1)
• 750 MCM Max
  (1)
• CAT3, 5e, 6
  (2)
• 6 AWG To 4/0 Aluminum And 8 AWG To 250 KCMIL Copper Wires
  (1)
• #10 AWG
  (8)
• #8 AWG
  (3)
• #2 AWG
  (1)
• #1 AWG
  (1)
• #14 AWG
  (4)
• 8 AWG - 1 AWG AWG
  (1)
• 14 AWG - 2 AWG AWG
  (1)
• #6 AWG
  (1)
• 8 AWG - 500 kcmil AWG
  (2)
• 4 AWG - 750 kcmil AWG
  (2)
• 8 AWG - 750 kcmil Copper Code Lugs And Splices, 8 AWG - 600 kcmil Copper Flex Lugs And Splices, 6 AWG - 250 kcmil StructuredGround Grounding System Connectors and Select 500 kcmil Combinations, 10 AWG - 3/0 AWG Copper Code CTAPF Taps, 8 AWG - 4/0 AWG Copp AWG
  (1)
• 22 AWG -14 AWG AWG
  (1)
• #5 AWG
  (2)
• 22-10 AWG
  (9)
• 1/0-8 AWG
  (1)
• 250 kcmil-8 AWG
  (1)
• 26-10 AWG
  (1)
• 26-20 AWG
  (1)
• 8-4/0 AWG
  (1)
• CU 8 AWG-500 kcmil , AL 10 AWG-350 kcmil
  (1)
• 900 kcmil
  (1)
• 12-10 AWG
  (1)
• 16-6 AWG
  (1)
• Insulated RZ Terminals, Splices 26-22 AWG , CU Wire 22-14 AWG
  (1)
• 8-6 AWG
  (1)
• 26-1/0 AWG
  (1)
• 8-2 AWG CU , 10-6 AWG AL
  (2)
• CU 8-2 AWG , AL 10-6 AWG
  (1)
• 12 to 16 AWG
  (1)
• CU 8-250 AWG , AL 8-4/0 AWG
  (1)
• Connector 10-1/0 AWG 5/8 IN Service Entrance Connectors, 1/0-4/0 AWG 0.840 Service Entrance Connectors, 6 - 4/0 AWG Aluminum H Taps, 10-2 AWG Copper H Taps, 6-2/0 AWG Copper Tension Splices, 6-4/0 AWG All Aluminum Tension Splices, 4-1/0 AWG One Piece ACSR
  (16)
• 8 AWG - 300 kcmil Cu, 8 AWG - 2/0 kcmil Al
  (6)
• 8 AWG - 600 kcmil Cu, 8 AWG - 350 kcmil Al
  (23)
• 8 AWG - 1000 Kcmil Cu & Al
  (6)
• 8 AWG - 750 Kcmil Cu & Al
  (20)
• 8 AWG - 1500 kcmil Cu, 8 AWG - 1250 kcmil Al
  (6)
• Standard Strand, 8 AWG - 500 kcmil Cu, 1/0 AWG - 350 kcmil AlFine Strand, 8 AWG - 350 Kcmil CuDLO, 8 AWG - 373.3 Kcmil Cu
  (6)
• 6 AWG - 500 kcmil Cu, 6 AWG - 400 kcmil Al
  (10)
• 6 AWG - 750 Kcmil Cu & Al
  (9)
• 4 AWG - 1000 kcmil Cu, 6 AWG - 1000 kcmil Al
  (6)
• 6 AWG - 750 kcmil Cu and Al
  (1)

Wire Size*

• #14
  (1)

Manufacturers