Wire and cable pulling device

Accessory

• 00863 UPC 00863 Elbow Unit 00835 UPC 00835 3.000 FT (0.900 M) Boom 00815 UPC 00815 3-1/2 IN Slip-In Coupling 00827 UPC 00827 5.000 IN Slip-In Coupling 00781 UPC 00781 2-1/2 IN Screw-On Coupling 00783 UPC 00783 3-1/2 IN Screw-On Coupling 3048 UPC 233
  (1)
• 35098 UPC 35098 Double-Braided Composite Rope 3/4 IN x 300 FT (19.100 MM x 91.000 M), 35100 UPC 35100 Double-Braided Composite Rope 3/4 IN x 600 FT (19.100 MM x 182.000 M), 35101 UPC 35101 Double-Braided Composite Rope 3/4 IN x 1,200 FT (19.100 MM x 365.0 M)
  (1)
• 00471 Coupling Hanger Kit, 00563 Adapter Weldment - 2 (UT8), 00564 Adapter Weldment - 2-1/2 IN, 00565 Adapter Weldment - 3 (UT8), 00566 Adapter Weldment - 3-1/2 IN, 00567 Adapter Weldment - 4 (UT8), 00583 Adapter Assembly - 2 Screw-On, 00584 Adapter Assembly - 2-1/2 Screw-On, 00585 Adapter Assembly- 3 Screw-On, 00586 Adapter Assembly - 3-1/2 Screw-On, 00587 Adapter Assembly - 4 Screw-On, 00588 Hanger Weldment, Short, 00589 Hanger Weldment, Long, 00590 Screw On Coupling Kit, 00610 Adapter Weldment - 5 (UT8)
  (1)

Cable Capacity

• Up to 2'' (50.8 mm) in outer diameter
  (1)
• From 2'' (50.8 mm) up to 4'' (101.6 mm) in outer diameter
  (1)

Dimensions

• 13 in. x 15 in. x 8 in. (33cm x 38cm x 20cm)
  (1)

Drive Motor

• 1-1/2 hp, 220 VAC, 50 Hz
  (1)

Includes

• Force Gauge And Vise Chains
  (1)
• End Caps
  (1)
• 6001 Super Tugger, Floor Mount, Mobile Carriage, Boom Mount, 4.000 FT Boom Tube, Nose Unit, 2-1/2 IN , 3.000 IN, 3-1/2 IN, 4.000 IN Slip-In And Screw-On Couplings And Storage Trays
  (1)
• 6001 Super Tugger, Floor Mount, Mobile Carriage, Boom Mount, 4.000 FT Boom Tube, Nose Unit, 3.000 FT Boom Tube, Elbow Unit, 2-1/2 IN, 3.000 IN, 3-1/2 IN, 4.000 IN Slip-In And Screw-On Couplings And Storage Trays
  (1)

Overall Height

• 9'' (228.6 mm)
  (1)
• 14-1/4'' (362 mm)
  (1)
• Legs: 16-1/2'' (419.1 mm) Idler Roller: 3-1/2'' (88.9 MM)
  (1)

Overall Length

• Retracted: 11-1/2'' (292.1 mm) Extended: 21-1/4'' (539.75 mm)
  (1)
• 42-3/4'' (1085.9 mm)
  (1)
• Legs: 10'' (254 mm) Idler Roller: 9-5/8 '' (244.4 mm)
  (1)

Pull Force (range)

• up to 85 lb of tailing force
  (1)

Puller Compatibility

• G6, UT10, G10
  (1)

Pulling Capability

• 100 lb (45 kg)
  (1)

Pulling Force

• 6500.000 LB (28.900 KN) Maximum, 4500.000 LB (20.000 KN) Continuous
  (1)
• 200 lb (90 kg)
  (1)
• Attached to CTF-200 the kit will allow the user to feed up to 200 lb (90 kg)
  (1)

Pulling Rope

• 3/4 IN (19.100 MM) Double-Braided Composite, Rated At 26000LB (115.600 KN)
  (1)

Pulling Speeds

• 16.5 FTPM At No Load, (8.800 KN) - 11 (3.4) At 2000 LB, (17.900 KN) - 7.5 (2.3) At 4000 LB, (26.700 KN) - 6 (1.8) At 6000 LB
  (1)

Roller Opening Size

• 4.5'' (114 mm)
  (1)
• 0''- 2'' (0 mm - 50.8 mm)
  (1)
• 2'' - 4'' (50.8 mm - 101.6 mm)
  (1)

Rope Capacity

• 1/2" to 1"
  (1)

Speed

• High Speed: 16 FT/MINT (4.88 MR/MINT) At No Load, 14 FT/MINT (4.27 MR/MINT) At 2000 LB (8900 N), 12 FT/MINT (3.66 MR/MINT) At 4000 LB (17.8 KN); Low Speed: 7 FT/MINT (2.13 MR/MINT) At 6000 LB (26.7 KN), 6 FT/MINT (1.83 MR/MINT) At 8000 LB (35.6 KN)
  (1)
• Pulling Rope : 1/2 IN Polyester (10000 LB Minimum Breaking Strength), 00444 - Foot switch
  (1)
• up to 60 ft/min
  (1)

UNSPSC

• 39121722
  (1)

Voltage

• 120 VAC
  (1)

Weight

• 25 lb
  (1)

Manufacturers