Motor starter controls

Adjustable OFF-delay time / after opening of the safety circuits / Full-scale value

• 30 s
  (1)
• 3 s
  (1)

Adjustable pick-up value current / 1 / Full-scale value

• 80 A
  (1)

Adjustable pick-up value current / 1 / initial value

• 8 A
  (1)

Adjustable pick-up value current / 2 / initial value

• 8 A
  (1)

Adjustable pick-up value current / of instantaneous short-circuit trip unit / maximum

• 100 A
  (1)

Adjustable pick-up value current / of overload relay / for low rotational speed / maximum

• 52 A
  (1)

Adjustable pick-up value current / of overload relay / for low rotational speed / minimum

• 13 A
  (1)

Adjustable switching hysteresis for measured current value / Full-scale value

• 16 A
  (2)

Adjustable switching hysteresis for measured current value / initial value

• 0.2 A
  (1)

Ambient temperature / during operation / maximum

• 60 C
  (37)
• 70 C
  (4)
• 40 C
  (11)
• 85 C
  (16)
• 50 C
  (1)

Ambient temperature / during operation / minimum

• -25 C
  (18)
• -20 C
  (21)
• 20 C
  (3)
• 0 C
  (5)

Ambient temperature / during operation / Note

• Railwayapplication:-40...70?with10mmclearance.Seecatalogforotherratedconditions
  (2)

Ambient temperature / during storage / maximum

• 80 C
  (11)
• 90 C
  (11)
• 65 C
  (6)
• 70 C
  (1)

Ambient temperature / during storage / minimum

• -55 C
  (9)
• -40 C
  (12)
• -30 C
  (3)
• -50 C
  (3)

Ambient temperature / during transport / maximum

• 70 C
  (1)

Ambient temperature / during transport / minimum

• -40 C
  (1)

Ambient temperature / rated value

• 60 C
  (1)

Ambient temperature [F] / during operation / maximum

• 140 F
  (5)
• 104 F
  (8)

Ambient temperature [F] / during operation / minimum

• 68 F
  (13)
• -4 F
  (4)

Ambient temperature [F] / during storage / maximum

• 149 F
  (2)
• 176 F
  (9)

Ambient temperature [F] / during storage / minimum

• -22 F
  (7)
• 122 F
  (11)

Ampacity / for overcurrent duration < 1 s / maximum permissible

• 1600 A
  (2)

Ampacity / for permanent overcurrent / maximum permissible

• 80 A
  (2)

Apparent holding power / of the magnet coil / at AC

• 25.0 VA
  (7)
• 25 VA
  (1)
• 25.00 VA
  (1)
• 5.7 VA
  (3)
• 8.5 VA
  (1)

Apparent pick-up power / of the magnet coil / at AC

• 510 VA
  (1)
• 37.0 VA
  (3)
• 218 VA
  (1)

Application area

• forswitchingthecontrolsignalsinthecontrolcircuit
  (5)
• forswitchingthecontrolsignalsinthecontrolcircuitwithoptionofdirectconnectiontoelectroniccontrollers
  (2)
• fortheexpansionofauxiliarycontactsinthecontrolcircuit
  (1)

Arcing time / maximum

• 15 ms
  (4)

Arcing time / minimum

• 10 ms
  (11)

Auxiliary contacts in total / maximal

• 8
  (4)

AWG number / as coded connectable conductor cross section / for main contacts / minimum

• 18
  (1)

AWG number / as coded connectable conductor cross section / solid / maximum

• 14
  (1)
• 16
  (1)

B10 value / with high demand rate / acc. to SN 31920

• 1000000
  (9)

B10 value / with high demand rate / acc. to SN 31920 / Note

• With0.3xIe
  (7)

Backslide delay time / after opening of the safety circuits / typical

• 40 ms
  (2)

Cable entry type

• 1x(M20x1.5)
  (8)
• 3x(M20x1.5)
  (2)

Certificate of suitability

• UL
  (9)
• NEMAICS2;UL508;CSA22.2,No.14
  (9)
• NEMAICS2;UL508A
  (4)
• CE/UL/CSA/CCC
  (22)

Certificate of suitability / ATEX

• Yes
  (6)

Circuit principle

• reedswitches
  (1)

Circuit principle / of the output relay

• closed-circuitcurrent/open-circuitcurrent
  (1)

Closing delay / at AC / maximum

• 33 ms
  (1)

Closing delay / at AC / minimum

• 8 ms
  (5)

Closing delay / at DC / maximum

• 100 ms
  (2)

Closing delay / at DC / minimum

• 30 ms
  (2)

Closing power / of magnet coil / at DC

• 4 W
  (3)
• 2.8 W
  (2)
• 13 W
  (1)

Color

• turquoise
  (1)

Color / of accessory

• sandgray
  (1)

Color / of the actuating element

• red/yellow
  (1)
• black
  (1)

Conducted HF-interference emissions / acc. to CISPR11

• ClassBfordomestic,businessandcommercialenvironments;ClassAforindustrialenvironmentsat110VDC
  (23)
• ClassBforthedomestic,businessandcommercialenvironments
  (20)

Conducted interference / due to burst / acc. to IEC 61000-4-4

• 3kV/5kHz
  (51)

Conducted interference / due to conductor-conductor surge / acc. to IEC 61000-4-5

• 1kV
  (13)
• 2kV
  (36)

Conducted interference / due to conductor-earth surge / acc. to IEC 61000-4-5

• 2kV
  (10)
• 4kVsignallines2kV
  (36)

Conducted interference / due to high-frequency radiation / acc. to IEC 61000-4-6

• 10V
  (43)

Configuration of control input / 4

• NA
  (2)
• FactorysetasTRIPRESET
  (2)

Connectable conductor cross-section / for main contacts / stranded / maximum

• 50 mm2
  (1)

Connectable conductor cross-section / for main contacts / stranded / minimum

• 1 mm2
  (1)

Connectable conductor cross-section / solid / maximum

• 2.5 m mm2
  (1)
• 1.5 m mm2
  (1)

Connection

• insulationpiercingmethodforAS-Interfaceflatcable
  (1)
• usingremovablescrew-typeterminalstoAS-i,PC/RS232using9-poleD-Subconnector
  (1)

Contact rating / of auxiliary contacts / according to UL

• A600/Q600
  (6)
• B300/R300
  (1)

Contact rating / of the auxiliary contacts / of the overload relay / acc. to UL

• 10A@600VAC(A600),5A@250VDC(P300)
  (1)
• 5A@600VAC(B600),5A@250VDC(P300)
  (1)
• 5A@600VAC(B600),1A@250VDC(R300)
  (2)

Contact rating / of the auxiliary contacts / of the contactor / acc, to UL

• 10A@600VAC(A600),5A@600VDC(P600)
  (5)

Contact reliability / of auxiliary contacts

• 1faultyswitchingper100million(17V,1mA)
  (10)

Continuous current / of the C characteristic MCB

• 1 A
  (12)

Continuous current / of the DIAZED fuse link gG

• 6 A
  (9)
• 4 A
  (1)

Continuous current / of the quick DIAZED fuse link

• 10 A
  (6)
• 4 A
  (1)

Control supply voltage / 1 / at AC / at 50 Hz / Final rated value

• 600 V
  (1)
• 127 V
  (2)
• 400 V
  (1)

Control supply voltage / 1 / at AC / at 50 Hz / Initial rated value

• 127 V
  (1)
• 400 V
  (1)
• 48 V
  (1)

Control supply voltage / 1 / at AC / at 50 Hz / rated value

• 24 V
  (3)
• 400 V
  (2)
• 575 V
  (2)
• 690 V
  (2)

Control supply voltage / 1 / at AC / at 60 Hz / Final rated value

• 400 V
  (2)
• 240 V
  (1)

Control supply voltage / 1 / at AC / at 60 Hz / Initial rated value

• 400 V
  (1)

Control supply voltage / 1 / at DC / Final rated value

• 150 V
  (2)
• 70 V
  (1)

Control supply voltage / 1 / at DC / Initial rated value

• 70 V
  (2)
• 150 V
  (1)
• 24 V
  (1)

Control supply voltage / 1 / at DC / rated value

• 24 V
  (10)

Control supply voltage / at AC / at 50 Hz / rated value

• 220 V
  (1)

Control supply voltage / at AC / at 50 Hz / Rated value / maximum

• 0 V
  (4)
• 690.0 V
  (1)

Control supply voltage / at AC / at 50 Hz / Rated value / minimum

• 23 V
  (1)
• 420.0 V
  (1)
• 320.0 V
  (1)
• 160.0 V
  (1)
• 110 V
  (2)
• 380 V
  (1)

Control supply voltage / at AC / at 60 Hz / rated value

• 120V
  (2)
• 120 V
  (1)
• 24.0 V
  (1)
• 277 V
  (1)

Control supply voltage / at AC / at 60 Hz / Rated value / maximum

• 240 V
  (3)

Control supply voltage / at AC / at 60 Hz / Rated value / minimum

• 160.0 V
  (1)
• 220 V
  (1)
• 120 V
  (1)
• 110 V
  (2)
• 440 V
  (1)
• 100 V
  (1)

Control supply voltage / at DC / rated value

• 110 V
  (2)
• 250 V
  (1)

Control supply voltage / at DC / Rated value / maximum

• 0 V
  (6)
• 28.8 V
  (1)

Control supply voltage / at DC / Rated value / minimum

• 220 V
  (1)
• 23 V
  (1)
• 0 V
  (1)
• 21.6 V
  (1)

Control supply voltage frequency / 1 / rated value

• 50 Hz
  (8)

Control supply voltage frequency / 2 / rated value

• 60 Hz
  (11)

country of origin

• Mexico
  (1)
• USA
  (3)

Current / at input / maximum

• 820 A
  (1)

Degree of pollution

• 3
  (104)

Degree of protection NEMA rating

• NEMAType1
  (3)
• NEMAType4
  (2)
• 1
  (1)

Degree of protection NEMA rating / of the enclosure

• Opendevice(noenclosure)
  (1)
• NEMAType1
  (1)
• NEMA4,12
  (1)

Depth

• 85 mm
  (1)
• 64 mm
  (1)
• 84 mm
  (1)
• 31 mm
  (1)
• 89 mm
  (2)
• 108 mm
  (1)
• 10 mm
  (1)
• 73 mm
  (6)
• 117 mm
  (2)
• 121 mm
  (2)
• 58 mm
  (1)
• 121.6 mm
  (1)

Depth [in]

• 6 in
  (1)
• 5 in
  (2)
• 8 in
  (3)

Design of fuse holder

• ClassRfuseclips
  (1)

Design of overload relay

• SolidState
  (3)

Design of short-circuit protection

• fuse
  (7)
• circuit-breakers
  (5)

Design of the fuse link / for short-circuit protection of the auxiliary switch / required

• fusegL/gG:10A
  (12)

Design of the fuse link / for short-circuit protection of the main circuit / required

• 10kA@600V(ClassHorK);100kA@600V(ClassRorJ)
  (3)

Design of the housing

• Indoorgeneralpurposeuse
  (3)

Design of the housing / acc. to standard

• Yes
  (3)
• No
  (3)

Design of the product

• ManualStarter
  (4)
• ManualSwitch
  (3)
• K45mountingplateforwallmounting
  (1)
• Sidemoduletowidenmountingrailadapters
  (1)
• scalecover,sealable,forcoveringthecurrentsettingscale
  (1)
• Assembly
  (4)
• Installation
  (1)
• Non-reversingmotorstarter
  (3)
• Reversingmotorstarter
  (1)
• Full-voltagenon-reversingmotorstarter
  (7)
• Non-reversingmotorstarterwithfusibledisconnect
  (5)
• Full-voltagenon-reversingmotorstarterwithnon-fusibledisconnect
  (1)
• Non-reversingmotorstarterwithnon-fusibledisconnect
  (1)
• OFFdelaydevice
  (2)
• offdelay
  (1)
• with2auxiliarycontacts
  (1)
• standard
  (1)
• Forsimpleprotectionagainstunauthorizedaccess
  (1)
• Forheightadjustmentfordeviceswithoutelectricalconnectionviadeviceconnector,withawidthof22.5mmorgreater
  (1)
• For3SK1213/width>45mm
  (1)
• For3SK1/width17.5mm
  (1)
• For3SK1/width22.5mm
  (2)
• Formechanicalcodingoftheterminals
  (1)
• forsnappingontothefront,withSUVAapproval
  (1)
• forreversingstartersizeS2,canbemountedlaterally
  (1)
• fromabove,sizeS2
  (1)
• fromabove,TypeE,sizeS2
  (1)
• visibleisolatingdistance,canbelockedindisengagedposition
  (1)
• actuatingvoltagecontactor:ACandDC
  (2)
• TypeEacc.toUL
  (1)
• for30.5mmto22.5mmmountinghole
  (1)
• forsnappingontothefront
  (1)

Design of the product / Standard position switch

• Yes
  (2)

Design of the product / with separate actuator

• No
  (1)

Design of the product / with tumbler

• No
  (2)

Design of the short-circuit trip

• magnetic
  (2)
• Thermalmagneticcircuitbreaker
  (3)

Design of the surge suppressor

• withRCelements
  (4)
• withvaristor
  (7)
• withdiodeassemblies
  (1)
• withsuppressordiode
  (1)
• RCelement
  (5)
• Diodecombination
  (2)
• VaristorwithLED
  (3)
• withdiode
  (1)
• Varistor
  (1)

Diameter

• 38 mm
  (1)

Display version / LED

• Yes
  (2)

Electrical endurance (switching cycles) / at AC-15 / at 230 V / typical

• 100000
  (1)

Electrical input frequency / maximum

• 60 Hz
  (2)

Electrostatic discharge / acc. to IEC 61000-4-2

• 4kVcontactdischarge/8kVairdischarge
  (11)
• 6kVcontactdischarge/8kVairdischarge
  (36)

EMC emitted interference / acc. to IEC 60947-1

• ambienceA(industrialsector)
  (1)

EMI immunity / acc. to IEC 60947-1

• ambienceA(industrialsector)
  (1)

Enclosure

• NEMA 4
  (2)

Explosion protection marking / for intrinsic safety of related equipment / EEx ia

• No
  (1)

Failure rate [FIT] / with low demand rate / acc. to SN 31920

• 100 FIT
  (100)

Field-bound HF-interference emission / acc. to CISPR11

• ClassBforthedomestic,businessandcommercialenvironments
  (27)
• ClassBfordomestic,businessandcommercialenvironments;ClassAforindustrialenvironmentsat110VDC
  (25)

Galvanic isolation / between entrance and outlet

• Yes
  (2)

Galvanic isolation / between the outputs

• Yes
  (2)

Galvanic isolation / between the voltage supply and other circuits

• Yes
  (2)

Hardware fault tolerance / acc. to IEC 61508

• 1
  (1)

Height

• 36.5 mm
  (1)
• 36 mm
  (1)
• 155 mm
  (1)
• 107 mm
  (1)
• 175 mm
  (1)
• 170 mm
  (1)
• 57.5 mm
  (6)
• 70 mm
  (4)
• 46 mm
  (4)
• 19 mm
  (1)
• 265 mm
  (1)
• 73 mm
  (1)
• 100 mm
  (1)
• 30 mm
  (15)
• 40 mm
  (1)

Height of the sensor

• 13 mm
  (1)

Height [in]

• 24 in
  (1)
• 12.92 in
  (1)
• 7.69 in
  (1)
• 11 in
  (2)
• 15 in
  (1)
• 20 in
  (1)

Holding power / at AC / minimum

• 14 W
  (1)
• 8.6 W
  (1)

Holding power / of magnet coil / at DC

• 1.6 W
  (1)
• 2.8 W
  (1)
• 4 W
  (3)

Identification number and letter for switching elements

• 22E
  (21)
• 21
  (1)
• 31E
  (20)
• 40E
  (16)
• 44E
  (4)
• 62E
  (5)

Inductive power factor / with closing power of the coil

• 0.8
  (3)

Inductive power factor / with the holding power of the coil

• 0.25
  (2)

Input current / _2 / rated value

• 1.6 A
  (1)

Input current / _6 / rated value

• 3.9 A
  (1)

Installation altitude / at height above sea level / maximum

• 2000 m
  (12)

Installation altitude [ft] / at height above sea level / maximum

• 6560 ft
  (4)

Installation environment regarding EMC

• ThisproductissuitableforClassBenvironmentsandcanalsobeusedindomesticenvironments.
  (1)

Insulation voltage / rated value

• 500 V
  (2)
• 300 V
  (2)

Insulation voltage / with degree of pollution 3 / rated value

• 690 V
  (7)

Insulation voltage / with multi-phase operation / at AC / Rated value

• 300 V
  (3)

Insulation voltage / with single-phase operation / at AC / Rated value

• 600 V
  (2)

Length of the sensor

• 33 mm
  (1)

Make time / with automatic start / after power failure / maximum

• 3 s
  (1)

Make time / with automatic start / at DC / maximum

• 110 ms
  (1)
• 85 ms
  (1)

Material

• plastic
  (1)

Material / of accessory

• Metalmatt
  (1)

Material / of the conductor / at overload relay / for auxiliary contacts

• CU
  (9)

Material / of the conductor / for auxiliary contacts / of the contactor

• CU
  (9)

Material / of the conductor / for load-side outgoing feeder

• ALorCU
  (3)
• CU
  (2)

Material / of the conductor / for supply

• ALorCU
  (2)

Material / of the conductor / of the magnet coil

• CU
  (7)

Material / of the enclosure

• plastic
  (5)
• aluminum
  (1)

Maximum short-circuit current breaking capacity (Icu) / at 400 V / rated value

• 100 k kA
  (5)

Measurable current / at AC / Full-scale value

• 80 A
  (1)

Measurable current / at AC / initial value

• 8 A
  (1)

Measurable voltage / at AC / Full-scale value

• 690 V
  (2)

Mechanical service life (switching cycles) / of contactor / typical

• 30000000
  (4)
• 10000000
  (1)
• 5000000
  (2)

Mechanical service life (switching cycles) / of the main contacts / typical

• 10000000
  (4)
• 5000000
  (2)

Mechanical service life (switching cycles) / typical

• 10000000
  (2)

Mounting

• Flush
  (4)

Mounting height

• 4.6 mm
  (1)

mounting position

• any
  (35)
• vertical
  (2)
• +/-180rotationpossibleonverticalmountingsurface;canbetiltedforwardandbackwardby+/-22.5onverticalmountingsurface
  (41)

Mounting type

• clip-on
  (27)
• wallmounting
  (8)
• plug-infixing
  (1)
• Surfacemountingandinstallation
  (2)
• screws
  (1)
• screwandsnap-onmountingonto35mmstandardmountingrail
  (67)
• screwfixing
  (4)
• directmounting
  (2)
• snap-onmounting
  (1)

No-load switching frequency / at AC

• 10000 1/h
  (4)

No-load switching frequency / at DC

• 10000 1/h
  (7)

Number of CO contacts / for auxiliary contacts

• 1
  (1)

Number of interfaces / other

• 1
  (1)

Number of NC contacts / for auxiliary contacts

• 1
  (3)
• 2
  (1)

Number of NC contacts / for auxiliary contacts / instantaneous contact

• 2
  (4)
• 1
  (3)

Number of NC contacts / for auxiliary contacts / of the overload relay

• 1
  (4)

Number of NO contacts / at contactor / for auxiliary contacts

• 1
  (5)

Number of NO contacts / for auxiliary contacts

• 9
  (1)
• 1
  (14)
• 2
  (3)
• 3
  (2)
• 4
  (1)

Number of NO contacts / for auxiliary contacts / instantaneous contact

• 2
  (3)
• 3
  (3)
• 4
  (2)

Number of NO contacts / for auxiliary contacts / of the overload relay

• 1
  (1)

Number of NO contacts / for main contacts

• 3
  (5)

Number Of Poles

• 3
  (104)
• 1
  (2)
• 2
  (6)

Number of poles / for main current circuit

• 3
  (19)
• 2
  (2)

OFF-delay time / maximum

• 12 ms
  (1)
• 24 ms
  (7)

OFF-delay time / minimum

• 14 ms
  (1)
• 10 ms
  (2)

Opening delay / at AC / maximum

• 15 ms
  (4)

Opening delay / at AC / minimum

• 4 ms
  (5)

Opening delay / at DC / maximum

• 13 ms
  (3)

Opening delay / at DC / minimum

• 7 ms
  (3)

Operating class of the fuse link

• ClassR
  (2)

Operating current / at 1 current path / at DC-12 / at 110 V / rated value

• 3 A
  (6)

Operating current / at 1 current path / at DC-12 / at 220 V / rated value

• 1 A
  (4)

Operating current / at 1 current path / at DC-12 / at 24 V / rated value

• 10 A
  (3)

Operating current / at 1 current path / at DC-12 / at 440 V / rated value

• 0.3 A
  (5)

Operating current / at 1 current path / at DC-12 / at 600 V / rated value

• 0.15 A
  (7)

Operating current / at 1 current path / at DC-13 / at 110 V / rated value

• 1 A
  (5)

Operating current / at 1 current path / at DC-13 / at 220 V / rated value

• 0.3 A
  (6)

Operating current / at 1 current path / at DC-13 / at 24 V / rated value

• 10 A
  (2)
• 6 A
  (2)

Operating current / at 1 current path / at DC-13 / at 440 V / rated value

• 0.14 A
  (4)

Operating current / at 1 current path / at DC-13 / at 600 V / rated value

• 0.1 A
  (8)

Operating current / at 17 V / minimum

• 5 mA
  (2)

Operating current / at AC / at 400 V / rated value

• 12 A
  (1)
• 32 A
  (2)
• 0.4 A
  (1)
• 4 A
  (2)

Operating current / at AC / at 600 V / rated value

• 270 A
  (1)
• 18 A
  (8)
• 27 A
  (2)
• 9 A
  (1)

Operating current / at AC-12 / maximum

• 10 A
  (5)

Operating current / at AC-15 / at 230 V / rated value

• 10 A
  (9)

Operating current / at AC-15 / at 400 V / rated value

• 3 A
  (4)

Operating current / at AC-15 / at 500 V / rated value

• 2 A
  (4)

Operating current / at AC-15 / at 690 V / rated value

• 1 A
  (5)

Operating current / at AC-3 / at 400 V / Rated value

• 2.50 A
  (1)
• 8.00 A
  (1)
• 20.00 A
  (1)
• 3.20 A
  (1)
• 16.00 A
  (1)
• 0.40 A
  (1)

Operating current / at DC-13 / at 24 V / rated value

• 3 A
  (1)

Operating current / of motor circuit breaker / rated value

• 10 A
  (1)

Operating current / of the auxiliary contacts / of the overload relay / at AC / at 600 V

• 5:00M A
  (2)

Operating current / of the auxiliary contacts / of the overload relay / at DC / at 250 V

• 1:00M A
  (4)

Operating current / rated value

• 108 A
  (1)
• 63 A
  (3)

Operating current / with 2 current paths in series / at DC-12 / at 110 V / rated value

• 4 A
  (7)

Operating current / with 2 current paths in series / at DC-12 / at 220 V / rated value

• 2 A
  (5)

Operating current / with 2 current paths in series / at DC-12 / at 24 V / rated value

• 10 A
  (5)

Operating current / with 2 current paths in series / at DC-12 / at 440 V / rated value

• 1.3 A
  (6)

Operating current / with 2 current paths in series / at DC-12 / at 60 V / rated value

• 10 A
  (8)

Operating current / with 2 current paths in series / at DC-12 / at 600 V / rated value

• 0.65 A
  (7)

Operating current / with 2 current paths in series / at DC-13 / at 110 V / rated value

• 1.3 A
  (10)

Operating current / with 2 current paths in series / at DC-13 / at 220 V / rated value

• 0.9 A
  (5)

Operating current / with 2 current paths in series / at DC-13 / at 24 V / rated value

• 10 A
  (3)

Operating current / with 2 current paths in series / at DC-13 / at 440 V / rated value

• 0.2 A
  (4)

Operating current / with 2 current paths in series / at DC-13 / at 60 V / rated value

• 3.5 A
  (7)

Operating current / with 2 current paths in series / at DC-13 / at 600 V / rated value

• 0.1 A
  (5)

Operating current / with 3 current paths in series / at DC-12 / at 110 V / rated value

• 10 A
  (5)

Operating current / with 3 current paths in series / at DC-12 / at 220 V / rated value

• 3.6 A
  (6)

Operating current / with 3 current paths in series / at DC-12 / at 24 V / rated value

• 10 A
  (8)

Operating current / with 3 current paths in series / at DC-12 / at 440 V / rated value

• 2.5 A
  (7)

Operating current / with 3 current paths in series / at DC-12 / at 60 V / rated value

• 10 A
  (3)

Operating current / with 3 current paths in series / at DC-12 / at 600 V / rated value

• 1.8 A
  (3)

Operating current / with 3 current paths in series / at DC-13 / at 110 V / rated value

• 3 A
  (2)

Operating current / with 3 current paths in series / at DC-13 / at 220 V / rated value

• 1.2 A
  (6)

Operating current / with 3 current paths in series / at DC-13 / at 24 V / rated value

• 10 A
  (6)

Operating current / with 3 current paths in series / at DC-13 / at 440 V / rated value

• 0.5 A
  (6)

Operating current / with 3 current paths in series / at DC-13 / at 60 V / rated value

• 4.7 A
  (8)

Operating current / with 3 current paths in series / at DC-13 / at 600 V / rated value

• 0.26 A
  (7)

Operating frequency / 2 / rated value

• 60 Hz
  (1)

Operating frequency / at AC-12 / maximum

• 1000 1/h
  (9)

Operating frequency / at AC-14 / maximum

• 1000 1/h
  (5)

Operating frequency / at AC-15 / maximum

• 1000 1/h
  (4)

Operating frequency / at DC-12 / maximum

• 1000 1/h
  (5)

Operating frequency / at DC-13 / maximum

• 1000 1/h
  (5)

Operating frequency / rated value / minimum

• 50 Hz
  (8)

Operating power / at AC-3 / at 230 V / rated value

• 1500 W
  (2)
• 4000 W
  (1)
• 550 W
  (1)

Operating power / at AC-3 / at 400 V / rated value

• 0.37 k kW
  (1)
• 1500 kW
  (4)
• 5.50 k kW
  (3)
• 15.00 k kW
  (1)
• 1.50 k kW
  (1)
• 7.50 k kW
  (1)

Operating power / for three-phase motors / at 400 V / at 50 Hz / maximum

• 0.37 kW
  (1)
• 1.1 kW
  (1)

Operating power / for three-phase motors / at 400 V / at 50 Hz / minimum

• 5.5 kW
  (1)

Operating voltage / at AC-3 / Rated value / maximum

• 600 V
  (13)
• 277 V
  (5)
• 575 V
  (2)
• 690 V
  (1)

Operating voltage / for main current circuit / at AC / at 60 Hz / maximum

• 600 V
  (3)

Operating voltage / rated value / maximum

• 400 V
  (1)

Phase number

• 3
  (1)

Power loss [V?A] / maximum

• 25 VA
  (1)

Power loss [W]

• 2.1 W
  (1)

Power Supply

• 208/230/460/575vac
  (12)

Product category

• Terminalcovers
  (1)
• Furtheraccessories
  (1)
• Auxiliaryswitchblocks
  (1)
• Baseplates
  (1)

Product component / Auxiliary switch

• No
  (2)
• Yes
  (1)

Product component / bottom wiring module

• Yes
  (2)

Product component / top wiring module

• Yes
  (2)

Product component / transparent cover

• No
  (5)

Product component / Trip indicator

• Yes
  (2)

Product designation

• Non-reversingmotorstarter
  (13)
• undervoltagerelease
  (18)
• mechanicallatch
  (1)
• ManualStarter
  (3)
• ManualSwitch
  (3)
• covercapsfortransverseauxiliaryswitch
  (1)
• Identificationlabels
  (2)
• shuntrelease
  (10)
• signalingswitch
  (2)
• individualmount
  (1)
• surgesuppressor
  (28)
• Cover
  (4)
• Magnetcoil
  (1)
• Terminalblock
  (2)
• ISOsurface-mountedhousingwithEMERGENGYOFF
  (2)
• ISOsurface-mountedhousing
  (1)
• ISOinstallationhousingwithEMERGENCYOFF
  (1)
• Alusurface-mountedhousingwithEMERGENCYOFF
  (1)
• Boxterminalblock
  (3)
• Coversforcablelugandbusbarconnections
  (1)
• LEDdisplaymodule
  (1)
• Coversforscrewterminals
  (1)
• connectingcable
  (1)
• auxiliaryswitch,lateral
  (1)
• Reversingmotorstarter
  (2)
• Lever-typerotaryoperatingmechanism
  (3)
• Non-reversingmotorstarterwithfusibledisconnect
  (3)
• Non-reversingmotorstarterwithnon-fusibledisconnect
  (1)
• Auxiliarycontactor
  (10)
• mountingrailadapter
  (1)
• plug-inadditionalloadmodule
  (1)
• openingdelaydeviceforcontactor
  (1)
• Insulationstop
  (1)
• pneumaticdelayblock
  (2)
• Coilconnectionmodule
  (1)
• Expansionplug
  (1)
• disconnectormodule
  (2)
• Cover,sealable
  (1)
• Outgoingconnectorforcontactors,sizeS00/S0
  (1)
• Adapterforcontactor,sizeS0
  (1)
• Adapterforcontactor,sizeS00
  (1)
• auxiliaryswitch
  (4)
• door-couplingrotaryoperatingmechanism
  (1)
• controlkit
  (1)
• Couplingrelayforswitchingauxiliarycircuits
  (2)
• Motorizedoperatingmechanism
  (2)
• Deviceconnector
  (3)
• Deviceterminationconnectorset
  (1)
• Deviceterminationconnector
  (1)
• Codingpinsforremovableterminals
  (1)
• Outputexpansion
  (1)
• Baseplate
  (1)
• Mechanicallockingdevice
  (1)
• Three-phasefeederterminal
  (2)
• Contactorrelayforrailwayapplications
  (1)
• Wiringkit
  (2)
• Adapter
  (1)

Product extension / Auxiliary switch

• No
  (3)
• Yes
  (5)

Product feature / Protective coating on printed-circuit board

• Yes
  (5)

Product function

• Reversingmotorstarter
  (1)
• solid-staterelay/solid-statecontactor3RF2
  (1)
• Non-reversingmotorstarterwithfusibledisconnect
  (2)
• Codingpinsforterminals
  (1)
• Non-reversingmotorstarter
  (1)

Product function / active current monitoring

• Yes
  (2)

Product function / Apparent current monitoring

• Yes
  (1)

Product function / Auto-reset

• Yes
  (1)
• No
  (1)

Product function / Bus communication

• No
  (23)

Product function / can be activated or deactivated / phase sequence recognition

• Yes
  (1)

Product function / Control circuit interface to parallel wiring

• No
  (1)

Product function / Current asymmetry detection acc. to IEC/NEMA

• No
  (1)

Product function / Current asymmetry detection acc. to Siemens

• No
  (1)

Product function / Current window recognition DC

• No
  (3)

Product function / Disconnector functionality

• Yes
  (6)
• No
  (5)

Product function / dynamic wire break detection

• No
  (1)
• Yes
  (1)

Product function / EMERGENCY OFF function

• No
  (5)
• Yes
  (5)

Product function / External reset

• Yes
  (5)
• No
  (2)

Product function / Fault storage

• No
  (2)

Product function / Galvanic isolation

• Yes
  (2)

Product function / Ground fault detection

• Yes
  (3)

Product function / Main switches with supply disconnect function and EM-STOP switches

• No
  (1)

Product function / Manual RESET

• No
  (1)
• Yes
  (1)

Product function / motor protection

• Yes
  (4)

Product function / Overcurrent and undercurrent monitoring

• Yes
  (1)

Product function / Overcurrent detection 1 phase

• No
  (1)

Product function / Overcurrent detection 3 phase

• Yes
  (2)

Product function / Overcurrent detection DC

• No
  (2)

Product function / Overcurrent monitoring

• Yes
  (2)

Product function / overload protection

• Yes
  (5)

Product function / Phase failure detection

• Yes
  (7)

Product function / Phase unbalance

• Yes
  (2)

Product function / positive opening

• Yes
  (1)

Product function / positively driven operation acc. to IEC 60947-5-1

• Yes
  (4)

Product function / positively driven operation acc. to IEC 60947-5-1 / Note

• with3RH29
  (2)

Product function / removable terminal for auxiliary and control circuit

• Yes
  (2)

Product function / reverse starting

• No
  (1)

Product function / Short circuit protection

• No
  (12)
• Yes
  (7)

Product function / Switching cycle counter

• No
  (1)

Product function / Test function

• Yes
  (7)

Product function / undercurrent detection 1 phase

• No
  (1)

Product function / undercurrent detection 3 phases

• Yes
  (2)

Product function / undercurrent detection DC

• No
  (1)

Product function / Undercurrent monitoring

• Yes
  (1)

Product function / Voltage window recognition 1 phase

• No
  (1)

Product function / Voltage window recognition 3 phase

• No
  (1)

Product type designation

• 3RH2
  (9)
• 3RH19
  (1)

Product type designation / of soft starter

• 3RW403.,3RW404.
  (1)

Product variations

• &DHMK2_3RH2&,&DHMK1_3RH2&
  (5)

Proportion of dangerous failures / with high demand rate / acc. to SN 31920

• 73 %
  (3)

Proportion of dangerous failures / with low demand rate / acc. to SN 31920

• 40 %
  (6)

Protection against electrical shock

• (NAforenclosedproducts)
  (3)
• NAforenclosedproducts
  (1)
• finger-safe
  (12)
• finger-safewhentouchedverticallyfromfrontacc.toIEC60529
  (2)

Protection class IP

• IP20
  (47)
• IP66,IP67,IP69(IP69K)
  (1)

Protection class IP / of the enclosure

• IP55
  (7)
• IP65
  (2)
• IP20
  (1)

Protection class IP / on the front

• IP20
  (31)
• IP64
  (1)

Protocol / is supported / IO-Link protocol

• No
  (1)

Protocol / is supported / PROFIBUS protocol

• No
  (1)

Protocol / is supported / PROFIsafe protocol

• No
  (1)

Pulse duration / of the ON pushbutton input / minimum

• 0.15 s
  (2)

Reference code / acc. to DIN 40719 extended according to IEC 204-2 / acc. to IEC 750

• F
  (22)
• K
  (13)

Reference code / acc. to DIN EN 61346-2

• F
  (10)
• K
  (9)

Reference code / acc. to DIN EN 81346-2

• K
  (11)

Relative humidity / at 25 C / during operation / maximum

• 95 %
  (1)

Relative humidity / during operation / maximum

• 95 %
  (1)

Relative humidity / during operation / minimum

• 10 %
  (1)

Relative repeat accuracy

• 1 %
  (4)

Release voltage in percent / of the magnet coil / relating to input voltage

• 60 %
  (1)
• 50 %
  (6)
• 50.00 %
  (1)

Required spacing / for grounded parts / at the side

• 6 mm
  (7)

Required spacing / for grounded parts / downwards

• 10 mm
  (7)

Required spacing / for grounded parts / forwards

• 10 mm
  (11)

Required spacing / for grounded parts / upwards

• 10 mm
  (7)
• 50 mm
  (1)

Required spacing / for live parts / at the side

• 6 mm
  (5)

Required spacing / for live parts / Backwards

• 0 mm
  (1)

Required spacing / for live parts / downwards

• 10 mm
  (4)

Required spacing / for live parts / forwards

• 10 mm
  (5)

Required spacing / for live parts / upwards

• 10 mm
  (5)

Required spacing / with side-by-side mounting / at the side

• 0 mm
  (10)

Required spacing / with side-by-side mounting / downwards

• 10 mm
  (6)

Required spacing / with side-by-side mounting / forwards

• 10 mm
  (8)

Required spacing / with side-by-side mounting / upwards

• 10 mm
  (8)

Reset function

• Manualandautomatic
  (2)
• Manual,automaticandremote
  (4)

Reset Type

• Manual
  (1)
• Auto/Manual/Remote
  (11)

Residual current / of the semiconductor output / maximum

• 0.035 mA
  (1)

Response time / maximum

• 200 ms
  (1)

Response value residual current detection / at 50/60 Hz / typical

• 8 A
  (1)

Safety Integrity Level (SIL) / acc. to IEC 61508

• 3
  (1)

Shock resistance / at rectangular impulse / at AC

• 7,3g/5ms,4,7g/10ms
  (1)

Shock resistance / at rectangular impulse / at DC

• 10g/5ms,5g/10ms
  (2)

Shock resistance / with sine pulse / at AC

• 11,4g/5ms,7,3g/10ms
  (3)

Shock resistance / with sine pulse / at DC

• 15g/5ms,8g/10ms
  (1)

Size

• 82x110x108mm
  (94)

Size of contactor

• S0
  (7)
• S0,S2
  (1)
• NEMAcontrollersize1
  (2)
• NEMAcontrollersize0
  (3)
• NEMAcontrollersize3
  (2)
• S00
  (13)
• S00,S0
  (2)
• S00,S0,S2,S3
  (3)
• S2,S3
  (10)
• S2
  (5)
• S3
  (2)

Size of the circuit-breaker

• S00,S0,S2,S3
  (24)
• S00,S0
  (2)
• S0
  (1)
• S2
  (3)
• S3
  (2)

Size of the screwdriver tip

• StandardscrewdriverSize2
  (2)

Special product feature

• ESP200overloadrelay;Dualvoltagecoil
  (4)
• ESP200overloadrelay
  (4)
• Dualvoltagecoil
  (1)

Standard

• UL E14900, cUL, CSA
  (12)
• cUL, CSA
  (1)
• UL Listed File E14900, CSA Certified File LR6535
  (80)
• Yes
  (4)
• RoHs, CSA, cUL, CE, GOST
  (94)
• UL 508, UL 698, UL 1203, CSA Number C22.2 14-M, C22.2 No. 25, C22.2 No. 30, C/US UL File Number E76550, E81751, Class I, Division 1, Groups C, D, Class II, Division 1 And 2, Groups E, F, G, Class III
  (2)

Standard for wireless communication / IEEE 802.11

• No
  (1)

Status display / AS-Interface / LED

• LEDgreen(power):poweron;LEDyellow(seractive):RS232interfaceinoperation;LEDgreen/red(test):testmode
  (1)

Suitability for use

• motorcircuitbreaker
  (14)

Suitability for use / Monitoring of floating sensors

• Yes
  (1)

Suitability for use / opto-electronic protection device monitoring

• Yes
  (1)

Suitability for use / safety switch

• Yes
  (1)

Surge voltage resistance / of the auxiliary and control current circuit / rated value

• 4 kV
  (1)

Surge voltage resistance / rated value

• 6 kV
  (8)
• 4000 V
  (1)

Switch-on delay time / maximum

• 95 ms
  (1)
• 34 ms
  (1)
• 29 ms
  (1)

Switch-on delay time / minimum

• 19 ms
  (4)
• 26 ms
  (1)

Switching frequency

• 5 Hz
  (1)

T1 value / for proof test interval or service life / acc. to IEC 61508

• 20 a
  (5)

Temperature / of the conductor / for line-side / maximum permissible

• 75 C
  (3)

Temperature / of the conductor / for load-side outgoing feeder / maximum permissible

• 75 C
  (1)

Temperature / of the conductor / of the magnet coil / maximum permissible

• 75 C
  (3)

Temperature range / moved / min

• -25 C
  (1)

Temperature range / stationary / max

• 85 C
  (1)

Temperature range / stationary / min

• -40 C
  (1)

Tightening torque / for line-side / maximum

• 20 lbf.in
  (2)
• 275 lbf.in
  (1)

Tightening torque / for line-side / minimum

• 180 lbf.in
  (2)
• 120 lbf.in
  (1)
• 35 lbf.in
  (1)

Tightening torque / for auxiliary contacts / of the contactor / maximum

• 15 lbf.in
  (6)

Tightening torque / for auxiliary contacts / of the contactor / minimum

• 7 lbf.in
  (1)
• 10 lbf.in
  (4)

Tightening torque / for load-side outgoing feeder / maximum

• 220 lbf.in
  (1)
• 45 lbf.in
  (1)
• 120 lbf.in
  (1)
• 20 lbf.in
  (2)
• 24 lbf.in
  (1)

Tightening torque / for load-side outgoing feeder / minimum

• 180 lbf.in
  (1)
• 20 lbf.in
  (2)
• 200 lbf.in
  (1)

Tightening torque / for the magnet coil / maximum

• 10 lbf.in
  (1)
• 12 lbf.in
  (2)

Tightening torque / for the magnet coil / minimum

• 5 lbf.in
  (8)

Tightening torque / with screw-type terminals / minimum

• 2 N.m
  (2)
• 0.4 N.m
  (1)

Tightening torque [lbfin] / at overload relay / for auxiliary contacts / maximum

• 10 lbf.in
  (4)

Tightening torque [lbfin] / at overload relay / for auxiliary contacts / minimum

• 7 lbf.in
  (3)

Total current / maximum

• 12 A
  (1)

Trip CLASS

• Class20
  (1)
• Class5/10/20(factoryset)/30
  (2)

Trip time / at phase-loss / maximum

• 3 s
  (3)

Type

• FVNR, Heavy Duty, Class 14
  (7)
• Class SMF
  (3)
• Standard, 1-Unit, Class SMF
  (1)
• accessory
  (1)
• Standard, Class MMS
  (1)
• replacement contact kit
  (4)
• Enclosed Accessory
  (1)
• Pump Controller
  (4)
• Motor Starter
  (7)
• Class 87
  (1)
• Non-Illuminated
  (1)
• Manual Contactor
  (2)
• Contactors
  (141)

Type of assignment

• 2
  (2)
• continousoperationaccordingtoIEC60947-6-2
  (10)
• Type1coordination
  (9)

Type of connectable conductor cross-sections / at AWG conductors / for auxiliary contacts

• 2x(20...16),2x(18...14),2x12
  (7)
• 2x(20...12)
  (5)
• 2x(20...16),2x(18...14)
  (1)

Type of connectable conductor cross-sections / at AWG conductors / for main contacts

• 2x(10...1/0),1x(10...2/0)
  (2)

Type of connectable conductor cross-sections / at AWG conductors / solid

• 1x(20...14),2x(18...16)
  (1)

Type of connectable conductor cross-sections / at AWG conductors / stranded

• 2x(14...10)
  (1)
• 1x(18...22)
  (1)

Type of connectable conductor cross-sections / finely stranded / with core end processing

• 1x(0.5...2.5mm),2x(0.5...1.0mm)
  (1)

Type of connectable conductor cross-sections / for auxiliary contacts / solid

• 2x(0.5...1.5mm),2x(0.75...2.5mm)
  (3)
• 2x(0.5...2.5mm),2x(2.5...4mm)
  (1)

Type of connectable conductor cross-sections / for main contacts / solid

• 1x(2.5...25mm)
  (1)
• 2x(2.5...50mm),1x(2.5...70mm)
  (2)

Type of connectable conductor cross-sections / for main contacts / stranded

• 1x(2.5...25mm)
  (2)
• 2x(2.5...50mm),1x(2.5...70mm)
  (2)

Type of connectable conductor cross-sections / solid

• 1x10mm,2x(1...2.5mm),2x(2.5...6mm)
  (2)

Type of disconnecting device

• NoDisconnect
  (1)
• Non-FusibleDisconnect30A
  (1)

Type of electrical connection

• screw-typeterminals
  (4)
• spring-loadedterminals
  (2)
• Push-interminal
  (1)
• cable
  (1)

Type of electrical connection / at input / for main current circuit

• screw-typeterminals/tabterminals
  (1)

Type of electrical connection / at overload relay / for auxiliary contacts

• screw-typeterminals
  (1)

Type of electrical connection / for auxiliary and control current circuit

• screw-typeterminals
  (11)
• spring-loadedterminals
  (4)

Type of electrical connection / for auxiliary contacts

• screw-typeterminals
  (4)

Type of electrical connection / for load-side outgoing feeder

• Screw-typeterminals
  (1)

Type of electrical connection / for main current circuit

• screw-typeterminals
  (18)
• plug-inwithoutterminals
  (1)

Type of electrical connection / for supply voltage infeed -> line-side

• Boxlug
  (6)
• Screw-typeterminals
  (1)

Type of electrical connection / of the magnet coil

• screw-typeterminals
  (7)

Type of voltage

• DC
  (1)

Type of voltage / of the control supply voltage

• n.a.
  (3)
• AC
  (37)
• AC/DC
  (38)
• DC
  (62)

Type of voltage / of the operating voltage

• AC/DC
  (1)

Type of voltage supply / via input/output link master

• No
  (1)

Vibration resistance

• 1...6Hz,15mm;20m/s,500Hz
  (43)

Vibration resistance / acc. to IEC 60068-2-6

• 5...500Hz:0.75mm
  (1)

Voltage Rating

• 120/240 VAC
  (5)
• 120@60Hz VAC
  (1)
• 240/480 VAC
  (2)
• 600 VAC
  (1)
• 120 V
  (8)
• 460V
  (2)

weight [lb]

• 113 lb
  (1)
• 6 lb
  (1)

Width

• 150 mm
  (1)
• 85 mm
  (2)
• 105 mm
  (2)
• 45 mm
  (6)
• 28 mm
  (2)
• 30 mm
  (16)
• 17.5 mm
  (1)
• 20 mm
  (1)
• 22.5 mm
  (1)
• 38 mm
  (1)

Width of the sensor

• 25 mm
  (1)

Width [in]

• 5.75 in
  (1)
• 10.5 in
  (1)
• 8 in
  (1)
• 12 in
  (3)

yielded mechanical performance [hp] / for three-phase AC motor / at 115 V / Rated value

• 2.000 hp
  (2)

Manufacturers