Electrical fittings

Amperage Rating

• 50 AMP
  (10)
• 30 AMP
  (1)

Bend Degree

• 90
  (31)
• 45
  (19)

Cable Entry

• Silver
  (20)
• Black
  (7)
• Through the fitting or conduit that the locknut is attached to
  (49)
• Used to cap EMT/RIGID and Bushings
  (6)
• Two piece steel clamp with tabs to insert through knockout
  (4)
• 2 screws w/sealing compound
  (2)
• Phenolic entrance to threaded exit for conduit
  (10)
• Steel Strap for use with Oval Service Cable Range: 3-2
  (1)
• Steel Strap for use with Oval Service Cable Range: 3-1/0 to 3-4/0
  (1)
• Phenolic entrance to single set screw exit for conduit
  (3)
• Phenolic entrance to 2 set screw exit for conduit
  (5)
• Phenolic entrance to Aluminum clamp type for Rigid/IMC
  (9)
• Phenolic entrance to Slip-fit set screw exit for conduit
  (2)
• Through Rigid conduit into throat of fitting
  (37)
• Through D-Ring
  (2)
• Does not Apply
  (2)
• Raised Mast entry
  (9)
• Screw-in entry for FMC
  (3)
• Lock-In tabs for NM cable
  (2)
• Steel Strap for use with Oval Service Cable Range: 2 -8, 6, 4, 2
  (1)
• Clamp to conduit. Entry through PVC head
  (6)
• Through conduit into expansion throat back to conduit
  (7)
• Push-In tabs for NM cable
  (2)
• Through Rigid conduit into throat of fitting. Flanged end for concrete forms.
  (3)
• Four screw strap fastens cable to connector body
  (7)
• Through Rigid conduit into expansion throat back to conduit
  (5)
• Two position/two screw hinge design which allows for a large cable range without needing separate bushings
  (7)
• (4) 19/64 IN Holes
  (2)
• (2) 3/8 IN, (3) 13/32 IN Holes
  (2)
• (2) 7/16 IN, (3) 1/2 IN Holes
  (2)
• (2) 27/64 IN, (3) 5/8 IN Holes
  (2)
• (1) 7/16 IN, (2) 19/32 IN, (3) 3/4 IN Holes
  (2)
• (1) 17/32 IN, (2) 3/4 IN, (3) 1 IN Holes
  (2)
• (1) 1 IN, (3) 7/8 IN, (3) 1-5/16 IN Holes
  (4)
• (3) 1-3/4 IN, (4) 1-1/8 IN Holes
  (3)
• (2) 1-1/8 IN, (4) 1-3/4 IN Holes
  (3)
• 0.88 IN Knock Out
  (1)
• 1.13 IN Knock Out
  (2)
• 1.38 IN Knock Out
  (2)
• 2 IN Knock Out
  (2)
• 2-1/2 IN Knock Out
  (2)

Certified Listed

• UL Listed
  (19)
• UL Listed;CSA Certified
  (2)

Classification

• ENT
  (1)

Color

• Silver
  (312)
• Gray
  (293)
• White
  (12)
• Black
  (541)
• Grey
  (11)
• yellow
  (130)
• Green/Gray
  (2)
• Metallic Gray
  (7)
• Metallic
  (5)
• Gray Metal
  (11)
• Orange
  (4)
• Zinc
  (89)
• Silver and red
  (47)
• Blue
  (6)
• grey/silver
  (3)
• silver grey
  (1)
• COPPER
  (10)
• DURA GREEN
  (89)
• Green
  (60)
• Dura-Copper
  (9)
• Miscellaneous
  (10)

Conductor Range

• 0.150 IN X 0.325 IN - 0.250 IN X 0.425 IN (Oval Grommet)
  (1)
• 0.275 IN X 0.475 IN - 0.400 IN X 0.610 IN (Oval Grommet)
  (1)
• 0.165 IN X 0.575 IN - 0.290 IN X 0.710 IN (Oval Grommet)
  (1)
• 12/2 (.44" 0 min) to 10/3 (.53" 0 max)
  (1)
• 12/2 - 10/3
  (1)
• Recommended cable types 14/2 to 10/3 (.43"-.61" Dia.) Steel or Aluminum AC/MC/MCI-A/HCF/HCFMCI-A .
  (1)
• Recommended cable types 8/3 to 6/3 (.73"-.85" Dia.) Steel or Aluminum AC/AC90/ACG90/MC/MCI-A/HCF/HCFMCI-A.
  (1)
• 14/2 - 10/3
  (1)

Conduit Type

• Flexible Metal Conduit
  (15)

Connection

• L(2.860) x W(0.960) x H(1.000)
  (1)
• L(2.520) x W(0.810) x H(1.000)
  (1)
• Male Threaded X Clamp
  (1)
• Male Threaded x Compression
  (39)
• Male Threaded
  (57)
• Clamp-On
  (10)
• Female Threaded
  (79)
• Threadless
  (2)
• Set Screw
  (4)
• NPT Male (Hub), Female (Rigid Conduit and IMC-NPT)
  (2)
• Threaded
  (503)
• NPS Thread
  (16)
• Male NPS Thread
  (6)
• Female X Female
  (4)
• Male Hub Threads - NPS
  (1)
• Tapered MNPT
  (32)
• Female Threaded X Male Threaded
  (17)
• Tapered FNPT
  (57)
• Tapered MNPT X Tapered FNPT
  (55)
• Snap-In
  (6)
• Tapered Male Threaded
  (4)
• Male Threaded X Set-Screw
  (9)
• 3/4 IN MNPT
  (1)
• 1 IN MNPT
  (1)
• M20 MNPT
  (1)
• 1/2 IN MNPT
  (1)
• 1/2-14 Female Tapered NPSM
  (2)
• 3/4-14 Female Tapered NPSM
  (2)
• 1-11-1/2 Female Tapered NPSM
  (2)
• 1-1/4-11-1/2 Female Tapered NPSM
  (2)
• 1-1/2-11-1/2 Female Tapered NPSM
  (2)
• 2-11-1/2 Female Tapered NPSM
  (2)
• 2-1/2 IN-8 Female Tapered NPSM
  (2)
• 3-8 Female Tapered NPSM
  (2)
• 4-8 Female Tapered NPSM
  (2)
• Tapered NPT
  (3)
• FNPT
  (7)
• Male X 1/2-14 Tapered FNPT
  (2)
• Male X 3/4-14 Tapered FNPT
  (2)
• Male X 1-11-1/2 Tapered FNPT
  (2)
• Male X 1-1/4-11-1/2 Tapered FNPT
  (2)
• Male X 1-1/2-11-1/2 Tapered FNPT
  (2)
• Male X 2-11-1/2 Tapered FNPT
  (2)
• Male X 2-1/2-8 Tapered FNPT
  (2)
• Male X 3-8 Tapered FNPT
  (2)
• Male X 3-1/2-8 Tapered FNPT
  (1)
• Male X 4-8 Tapered FNPT
  (2)
• Male Thread
  (1)
• Tapered FNPT Hub
  (4)
• Female Tapered threaded hubs NPT for Rigid and IMC Conduit
  (1)
• Tapered NPT Hub
  (1)
• 3/4 IN FNPT X 1/2 IN MNPT
  (1)
• 1 IN FNPT X 3/4 IN MNPT
  (1)
• 1-1/4 IN FNPT X 1 IN MNPT
  (1)
• FNPT X MNPSM
  (6)
• Threaded NPT
  (19)
• MNPS
  (17)
• FNPT X MNPT
  (3)
• FNPT X MNPS
  (3)
• Male NPS Hub X Set Screw
  (11)
• NPS Threads Male Hub
  (2)
• Male NPS Hub X Compression
  (12)
• Compression X MNPT Hub
  (7)
• Female/Female, Taperd Threads NPT
  (1)
• Screw On
  (40)
• Compression
  (1)
• Squeeze
  (6)
• 90 Degree
  (2)
• Mechanical
  (4)

Connector Type

• Jacketed MC/TECK
  (1)

Construction

• Die-cast
  (44)
• Porcelain, Steel
  (1)
• Sand Cast
  (2)
• Rugged Die-Cast
  (10)
• Die Cast
  (30)
• 0.96
  (1)
• 0.81
  (1)
• Two Piece
  (447)
• One Piece
  (104)
• Open Band
  (2)
• Three Piece
  (1)

Cubic Capacity

• 1.000 CU-IN
  (2)
• 0.74 CU-IN
  (1)
• 0.76 CU-IN
  (1)
• 3.1 CU-IN
  (1)
• 4.69 CU-IN
  (2)
• 9.38 CU-IN
  (1)
• 33.7 CU-IN
  (1)
• 91.23 CU-IN
  (1)
• 143.73 CU-IN
  (1)

Description - Long

• 3/4 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 4 in. Flex Double Bite Saddle Connector
  (1)
• 3/8 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 1 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3/4 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 3/8 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector, Insulated
  (1)
• 1/2 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1-1/4 in. Flex Double Bite Saddle Connector
  (1)
• 1-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 2 in. Flex Double Bite Saddle Connector
  (1)
• 2-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 3 in. Flex Double Bite Saddle Connector
  (1)
• 1/2 in. EMT - Flex, Squeeze/Set Screw, Combination Coupling
  (1)
• 3/4 in. EMT - Flex, Squeeze/Set Screw, Combination Coupling
  (1)
• 2-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 4 in. Rigid/IMC 3-Piece Coupling
  (1)
• 3/8 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector, Uninsulated
  (1)

Description - Short

• 3/4 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 4 in. Flex Double Bite Saddle Connector
  (1)
• 3/8 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 1/2 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 1 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3/4 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 3/8 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector, Insulated
  (2)
• 1/2 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1-1/4 in. Flex Double Bite Saddle Connector
  (1)
• 1-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 2 in. Flex Double Bite Saddle Connector
  (1)
• 2-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 3 in. Flex Double Bite Saddle Connector
  (1)
• 1/2 in. EMT - Flex, Squeeze/Set Screw, Combination Coupling
  (1)
• 3/4 in. EMT - Flex, Squeeze/Set Screw, Combination Coupling
  (1)
• 2-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 4 in. Rigid/IMC 3-Piece Coupling
  (1)

Description - Slang

• EMT Flex
  (2)
• 3-Piece Super Coupling
  (3)
• 3-Piece Coupling
  (1)

Dimensions

• 3.3750 IN X 3.2500 IN X 2.2500 IN
  (9)
• 5.3600 IN X 1.2500 IN X 0.0966 IN
  (2)
• 4.6875 IN X 1.6250 IN X 4.6875 IN
  (10)
• 1.0000 IN X 1.0000 IN X 1.0000 IN
  (311)
• 7.0000 IN X 2.0600 IN X 4.0000 IN
  (2)
• 1.6200 IN X 1.6200 IN X 3.5000 IN
  (1)
• 5.3700 IN X 1.6200 IN X 1.6200 IN
  (1)
• 7.2500 IN X 1.6200 IN X 1.6200 IN
  (5)
• 9.1200 IN X 1.6200 IN X 1.6200 IN
  (1)
• 3.5000 IN X 1.6200 IN X 3.5000 IN
  (9)
• 3.5000 IN X 1.6200 IN X 5.3700 IN
  (11)
• 5.3700 IN X 1.6200 IN X 3.5000 IN
  (2)
• 5.3700 IN X 1.6200 IN X 5.3700 IN
  (7)
• 5.3700 IN X 1.6200 IN X 9.1200 IN
  (1)
• 1.6200 IN X 1.6200 IN X 1.6200 IN
  (42)
• 6.6200 IN X 3.0000 IN X 5.0000 IN
  (1)
• 0.5000 IN X 1.5000 IN X 0.5000 IN
  (2)
• 0.7500 IN X 1.5000 IN X 0.7500 IN
  (2)
• 1.0000 IN X 1.5000 IN X 1.0000 IN
  (2)
• 1.2500 IN X 1.5000 IN X 1.2500 IN
  (2)
• 1.5000 IN X 1.5000 IN X 1.5000 IN
  (2)
• 2.0000 IN X 1.5000 IN X 2.0000 IN
  (2)
• 2.5000 IN X 1.5000 IN X 2.5000 IN
  (1)
• 3.0000 IN X 1.5000 IN X 3.0000 IN
  (1)
• 3.5000 IN X 1.5000 IN X 3.5000 IN
  (1)
• 1.2970 IN X 0.7550 IN X 0.6300 IN
  (4)
• 1.1750 IN X 0.3700 IN X 0.3700 IN
  (1)
• 1.7500 IN X 0.5000 IN X 0.5000 IN
  (1)
• X X 0.3280 IN
  (1)
• X X 0.4370 IN
  (1)
• X X 0.5480 IN
  (1)
• 0.0000 IN X X 1.6250 IN
  (2)
• X X 48.0000 IN
  (1)
• 48.0000 IN X 0.5000 IN X 0.5000 IN
  (1)
• 0.0000 IN X X 1.2500 IN
  (2)
• 0.0000 IN X X 1.5000 IN
  (3)
• 2.5000 IN X 1.2500 IN X 6.5000 IN
  (1)
• 5.6200 IN X 1.2500 IN X 10.0000 IN
  (1)
• 2.6800 IN X 0.8000 IN X 3.7800 IN
  (1)
• 4.0210 IN X 0.8370 IN X 3.3120 IN
  (1)
• 1.2500 IN X 1.6250 IN X 5.1250 IN
  (1)
• 8.7500 IN X 3.7190 IN X 1.2500 IN
  (2)
• 9.0000 IN X 3.7190 IN X 1.5000 IN
  (2)
• 9.0000 IN X 3.9690 IN X 1.7500 IN
  (1)
• 10.0630 IN X 4.4690 IN X 2.5000 IN
  (1)
• 1.3750 IN X 0.6250 IN X 2.1250 IN
  (2)
• 11.0000 IN X 2.5000 IN X 7.0000 IN
  (1)
• 7.2500 IN X 2.5230 IN X 11.0000 IN
  (1)
• 11.0000 IN X 2.5000 IN X 7.2500 IN
  (1)
• 11.0000 IN X 1.1250 IN X 8.0000 IN
  (1)
• 1.1200 IN X 7.5200 IN X 11.0000 IN
  (1)
• 8.0000 IN X 7.1250 IN X 7.7800 IN
  (1)
• 3.2000 IN X 1.2500 IN X 4.0200 IN
  (1)
• 3.7000 IN X 1.2500 IN X 4.5300 IN
  (1)
• 4.2300 IN X 1.2500 IN X 5.0500 IN
  (1)
• 4.7300 IN X 1.2500 IN X 5.5500 IN
  (1)
• 5.0480 IN X 1.2500 IN X 0.0635 IN
  (1)
• 6.7030 IN X 1.2500 IN X 0.0677 IN
  (1)
• 0.0000 IN X X 1.0000 IN
  (2)
• 0.0000 IN X X 0.5000 IN
  (1)
• X X 0.8750 IN
  (3)
• X X 0.7500 IN
  (9)
• 18.0000 IN X 1.6200 IN X 4.6200 IN
  (2)
• 24.0000 IN X 1.6200 IN X 4.6200 IN
  (1)
• 436.0000 IN X 1.0000 IN X 0.0200 IN
  (1)
• X X 3.0000 IN
  (8)
• 2.3750 IN X 0.5630 IN X 2.3750 IN
  (1)
• 2.7500 IN X 0.7500 IN X 2.7500 IN
  (1)
• 2.1880 IN X 2.0000 IN X 2.1880 IN
  (4)
• 3.0000 IN X 2.0000 IN X 3.0000 IN
  (1)
• 4.0000 IN X 2.0000 IN X 3.0000 IN
  (1)
• 3.0000 IN X 3.0000 IN X 3.0000 IN
  (2)
• 1.3750 IN X 0.6250 IN X 1.4380 IN
  (1)
• 1.8250 IN X 0.7500 IN X 1.8750 IN
  (1)
• 12.0000 IN X 2.0000 IN X 15.0000 IN
  (1)
• 20.0000 FT X 1.5800 IN X 0.1040 IN
  (1)
• X X 2.5100 IN
  (2)
• X X 3.2100 IN
  (1)
• X X 3.7700 IN
  (2)
• X X 4.2800 IN
  (1)
• 1.5200 IN X 1.2500 IN X 2.2500 IN
  (4)
• 4.6200 IN X 1.6200 IN X 3.0000 IN
  (1)
• 1.2500 IN X 1.6200 IN X 1.6200 IN
  (10)
• 3.0000 IN X 0.3750 IN X 3.4000 IN
  (2)
• 2.8750 IN X 2.8750 IN X 2.8750 IN
  (5)
• 5.0000 IN X 6.5000 IN X 5.0000 IN
  (1)
• 3.1250 IN X 3.1250 IN X 3.1250 IN
  (2)
• 4.2500 IN X 4.2500 IN X 4.5000 IN
  (1)
• 6.5000 IN X 6.5000 IN X 6.5000 IN
  (1)
• 5.0000 IN X 1.5000 IN X 5.0000 IN
  (1)
• 4.2500 IN X 4.2500 IN X 4.2500 IN
  (1)
• 2.8750 IN X 0.6880 IN X 2.8750 IN
  (1)
• 2.4600 IN X 1.2500 IN X 3.2800 IN
  (2)
• 1.0000 IN X 0.1600 IN X 2.7500 IN
  (1)
• 2.7000 IN X 1.2500 IN X 3.5200 IN
  (4)
• 1.6250 IN X 1.6250 IN X 1.6250 IN
  (1)
• 2.1000 IN X 1.6250 IN X 1.6250 IN
  (1)
• 3.2400 IN X 1.6200 IN X 3.2400 IN
  (1)
• 4.5610 IN X 1.2500 IN X 0.0635 IN
  (1)
• 5.2920 IN X 1.2500 IN X 0.0677 IN
  (1)
• 6.1470 IN X 1.2500 IN X 0.0677 IN
  (1)
• X X 12.7000 IN
  (1)
• X X 15.9000 IN
  (2)
• X X 19.0000 IN
  (1)
• X X 22.2000 IN
  (1)
• 8.0000 IN X 5.2500 IN X 3.3750 IN
  (1)
• 0.9700 IN X 0.8440 IN X 0.4850 IN
  (1)
• 1.6000 IN X 1.5900 IN X 0.5000 IN
  (2)
• 1.6100 IN X 0.8300 IN X 0.5000 IN
  (1)
• 1.6000 IN X 0.8300 IN X 0.5000 IN
  (1)
• X X 7.5000 IN
  (4)
• X X 1.8600 IN
  (1)
• X X 1.9900 IN
  (2)
• X X 2.2500 IN
  (4)
• X X 5.0500 IN
  (1)
• X X 5.5500 IN
  (1)
• X X 8.6900 IN
  (1)
• X X 6.0500 IN
  (1)
• X X 8.2400 IN
  (1)
• X X 10.0600 IN
  (1)
• 1.7800 IN X 1.2500 IN X 2.5100 IN
  (4)
• 1.9600 IN X 1.2500 IN X 2.7400 IN
  (2)
• 2.3300 IN X 1.2500 IN X 3.1300 IN
  (1)
• X X 11.7500 IN
  (3)
• 3.1100 IN X 1.2500 IN X 3.9100 IN
  (1)
• 3.6100 IN X 1.2500 IN X 4.4200 IN
  (1)
• 6.7400 IN X 1.2500 IN X 7.6200 IN
  (1)
• 5.0000 IN X 3.2500 IN X 5.3120 IN
  (1)
• 2.0000 IN X 0.5000 IN X 1.0000 IN
  (2)
• 1.6200 IN X 1.6200 IN X 4.0000 IN
  (1)
• X X 1.6200 IN
  (1)
• 5.0000 IN X 3.0000 IN X 5.0000 IN
  (1)
• 2.2500 IN X 2.2500 IN X 0.7500 IN
  (3)
• 2.6250 IN X 2.5000 IN X 0.7500 IN
  (2)
• 2.7500 IN X 2.7240 IN X 0.7500 IN
  (3)
• X X 2.8750 IN
  (1)
• 3.2120 IN X 3.0000 IN X 0.7500 IN
  (3)
• 3.3900 IN X 3.2500 IN X 0.7500 IN
  (4)
• 4.5940 IN X 3.7500 IN X 0.7500 IN
  (4)
• 5.4380 IN X 4.5630 IN X 1.0000 IN
  (4)
• 6.1700 IN X 5.0630 IN X 1.0000 IN
  (4)
• 6.8950 IN X 5.8130 IN X 1.2500 IN
  (2)
• X X 7.2500 IN
  (2)
• 7.7240 IN X 6.0630 IN X 1.2500 IN
  (3)
• 8.8510 IN X 7.3750 IN X 1.2500 IN
  (4)
• 10.4080 IN X 10.0000 IN X 1.5000 IN
  (4)
• 12.9380 IN X 11.0000 IN X 1.7500 IN
  (4)
• 15.5000 IN X 14.8750 IN X 1.7500 IN
  (2)
• 17.8750 IN X 17.5000 IN X 1.7500 IN
  (3)
• 19.6250 IN X 18.6250 IN X 2.0000 IN
  (2)
• 21.6560 IN X 21.2500 IN X 2.5000 IN
  (2)
• 25.2500 IN X 23.6250 IN X 2.5000 IN
  (2)
• 29.1250 IN X 26.5000 IN X 3.0000 IN
  (2)
• 33.1250 IN X 30.5000 IN X 3.0000 IN
  (2)
• X X 6.5000 IN
  (1)
• 2.4060 IN X 2.0000 IN X 0.7500 IN
  (2)
• 2.7500 IN X 2.2500 IN X 0.8750 IN
  (3)
• 2.9690 IN X 2.5000 IN X 0.8750 IN
  (2)
• 3.7500 IN X 2.7500 IN X 0.8750 IN
  (2)
• 4.2810 IN X 3.0000 IN X 0.8750 IN
  (2)
• 4.6410 IN X 3.5000 IN X 0.8750 IN
  (2)
• 6.7190 IN X 4.3130 IN X 1.2500 IN
  (2)
• 6.4840 IN X 4.8130 IN X 1.0000 IN
  (2)
• 7.5940 IN X 5.8130 IN X 1.2500 IN
  (1)
• X X 6.9375 IN
  (1)
• 7.8910 IN X 6.3130 IN X 1.0000 IN
  (2)
• 2.2500 IN X 2.0000 IN X 0.7500 IN
  (1)
• 2.3750 IN X 2.0000 IN X 0.7500 IN
  (1)
• 3.0310 IN X 2.5000 IN X 0.8750 IN
  (1)
• 3.7500 IN X 3.0000 IN X 0.8750 IN
  (1)
• 5.3130 IN X 3.2500 IN X 0.8750 IN
  (1)
• 6.6250 IN X 4.8130 IN X 1.2500 IN
  (1)
• 6.9690 IN X 5.3130 IN X 1.2500 IN
  (1)
• 5.3970 IN X 3.7500 IN X 0.7500 IN
  (1)
• X X 7.7500 IN
  (1)
• 3.0210 IN X 2.1420 IN X 1.0870 IN
  (1)
• X X 9.3750 IN
  (1)
• 4.7500 IN X 2.8750 IN X 4.7500 IN
  (1)
• 5.5000 IN X 3.0000 IN X 6.5938 IN
  (2)
• 6.6250 IN X 3.8750 IN X 6.6250 IN
  (2)
• 7.2500 IN X 4.3750 IN X 7.2500 IN
  (1)
• 7.8750 IN X 4.8750 IN X 7.8750 IN
  (2)
• 9.1875 IN X 5.9375 IN X 9.1875 IN
  (1)
• 10.3750 IN X 7.0000 IN X 10.3750 IN
  (3)
• 12.6250 IN X 9.0000 IN X 12.6250 IN
  (3)
• 14.9375 IN X 11.1250 IN X 14.9375 IN
  (3)
• 7.3750 IN X 13.3750 IN X 7.3750 IN
  (3)
• 8.2500 IN X 14.5000 IN X 8.2500 IN
  (2)
• 20.7500 IN X 16.3750 IN X 20.7500 IN
  (2)
• 23.6875 IN X 18.3750 IN X 23.6875 IN
  (2)
• 25.6875 IN X 20.3750 IN X 25.6875 IN
  (2)
• 4.1250 IN X 4.1250 IN X 2.6250 IN
  (2)
• 4.8750 IN X 4.8750 IN X 3.1250 IN
  (1)
• 5.5000 IN X 5.5000 IN X 3.7500 IN
  (2)
• 6.1250 IN X 6.1250 IN X 4.2500 IN
  (2)
• 6.7500 IN X 6.7500 IN X 4.7500 IN
  (2)
• 8.0625 IN X 8.0625 IN X 5.8125 IN
  (2)
• 9.5625 IN X 9.5625 IN X 6.8750 IN
  (2)
• 11.9375 IN X 11.9375 IN X 8.8750 IN
  (2)
• 14.0625 IN X 14.0625 IN X 11.0000 IN
  (2)
• 15.8125 IN X 15.8125 IN X 13.0000 IN
  (3)
• 17.7500 IN X 8.2500 IN X 14.2500 IN
  (2)
• 19.7500 IN X 19.7500 IN X 16.2500 IN
  (2)
• 21.8750 IN X 19.7500 IN X 18.2500 IN
  (2)
• 24.2500 IN X 24.2500 IN X 20.2500 IN
  (3)
• 35.5000 IN X 35.5000 IN X 30.2500 IN
  (2)
• 8.3750 IN X 6.0000 IN X 5.6250 IN
  (1)
• 9.8750 IN X 9.0000 IN X 5.0938 IN
  (2)
• 8.0000 IN X 8.0000 IN X 8.3750 IN
  (3)
• 10.9375 IN X 8.0000 IN X 9.9063 IN
  (2)
• 12.3750 IN X 10.0000 IN X 12.0938 IN
  (1)
• 13.5000 IN X 10.7500 IN X 13.2188 IN
  (2)
• 5.1250 IN X 8.0000 IN X 16.0000 IN
  (1)
• 20.0000 IN X 9.0000 IN X 19.9063 IN
  (2)
• 11.2500 IN X 7.5000 IN X 7.0000 IN
  (3)
• 10.6250 IN X 6.8750 IN X 12.7500 IN
  (1)
• 13.0000 IN X 8.0000 IN X 9.9063 IN
  (1)
• 14.6250 IN X 10.0000 IN X 12.0938 IN
  (1)
• 4.6250 IN X 1.2500 IN X 2.2813 IN
  (1)
• 5.3750 IN X 2.5000 IN X 2.5625 IN
  (1)
• 6.0000 IN X 3.0000 IN X 2.8438 IN
  (1)
• 7.2500 IN X 4.0000 IN X 3.6875 IN
  (1)
• 8.4375 IN X 5.0000 IN X 4.1875 IN
  (1)
• 9.7500 IN X 6.0000 IN X 4.7188 IN
  (3)
• 12.0000 IN X 8.0000 IN X 5.5313 IN
  (3)
• 14.4375 IN X 10.0000 IN X 4.1250 IN
  (2)
• 5.5000 IN X 12.0000 IN X 4.9063 IN
  (3)
• 18.2500 IN X 14.0000 IN X 8.7500 IN
  (3)
• 21.0000 IN X 16.0000 IN X 9.6250 IN
  (2)
• 23.0000 IN X 20.0000 IN X 10.4375 IN
  (2)
• 25.0000 IN X 10.0000 IN X 11.5000 IN
  (2)
• 4.1250 IN X 2.0000 IN X 4.9063 IN
  (1)
• 4.8750 IN X 2.5000 IN X 12.9375 IN
  (1)
• 11.9375 IN X 8.0000 IN X 14.4688 IN
  (2)
• 14.0625 IN X 10.0000 IN X 6.7500 IN
  (2)
• 15.8125 IN X 12.0000 IN X 7.8125 IN
  (2)
• 17.7500 IN X 14.0000 IN X 16.1250 IN
  (1)
• 19.7500 IN X 16.0000 IN X 22.7188 IN
  (1)
• 21.8750 IN X 18.0000 IN X 23.2500 IN
  (1)
• 24.2500 IN X 20.0000 IN X 23.7500 IN
  (1)
• 4.7500 IN X 2.1250 IN X 5.0000 IN
  (2)
• 5.8750 IN X 4.0000 IN X 6.0000 IN
  (3)
• 8.7500 IN X 6.3750 IN X 6.0000 IN
  (2)
• 12.5000 IN X 11.3750 IN X 8.0000 IN
  (2)
• 2.0000 IN X 1.1300 IN X 2.2100 IN
  (1)
• 0.1875 IN X 1.2500 IN X 2.2500 IN
  (1)
• X X 1.5300 IN
  (1)
• X X 1.6500 IN
  (1)
• X X 1.8700 IN
  (2)
• X X 2.0000 IN
  (7)
• X X 2.2100 IN
  (2)
• X X 2.7500 IN
  (4)
• X X 3.2800 IN
  (2)
• X X 3.5600 IN
  (2)
• X X 4.3100 IN
  (2)
• X X 4.8700 IN
  (1)
• X X 5.8100 IN
  (2)
• X X 6.9300 IN
  (2)
• X X 8.6800 IN
  (1)
• X X 9.7500 IN
  (1)
• 3.2490 IN X 1.1100 IN X 0.9510 IN
  (1)
• 3.2340 IN X 1.2340 IN X 0.9510 IN
  (1)
• 3.1400 IN X 1.4060 IN X 0.9510 IN
  (1)
• 3.4220 IN X 1.6560 IN X 0.9510 IN
  (1)
• 3.7340 IN X 1.9060 IN X 0.9510 IN
  (1)
• 4.0310 IN X 2.3120 IN X 0.9510 IN
  (1)
• 5.6500 IN X 2.9470 IN X 1.1750 IN
  (1)
• 5.9770 IN X 3.3220 IN X 1.1750 IN
  (1)
• X X 4.4375 IN
  (1)
• 7.3530 IN X 4.4000 IN X 1.1750 IN
  (1)
• 1.3980 IN X 0.8810 IN X 2.5000 IN
  (1)
• 2.5890 IN X 0.8840 IN X 3.6050 IN
  (1)
• 0.7220 IN X 0.8540 IN X 1.5510 IN
  (1)
• 0.9800 IN X 0.8730 IN X 1.9270 IN
  (1)
• 1.2390 IN X 0.8770 IN X 2.2710 IN
  (1)
• X X 2.3125 IN
  (1)
• 1.7700 IN X 0.8750 IN X 2.9000 IN
  (1)
• 2.4550 IN X 0.8450 IN X 3.3390 IN
  (1)
• X X 4.8125 IN
  (1)
• X X 6.1875 IN
  (1)
• X X 3.6300 IN
  (2)
• X X 3.4000 IN
  (2)
• X X 3.7500 IN
  (3)
• X X 4.2500 IN
  (2)
• X X 4.7500 IN
  (2)
• X X 10.0000 IN
  (2)
• X X 12.5000 IN
  (2)
• X X 15.0000 IN
  (2)
• X X 20.0000 IN
  (2)
• X X 13.4000 IN
  (2)
• X X 16.6300 IN
  (2)
• X X 18.2500 IN
  (2)
• X X 19.2500 IN
  (1)
• X X 12.6300 IN
  (1)
• 2.0290 IN X 0.6060 IN X 1.2070 IN
  (1)
• 2.2590 IN X 0.6270 IN X 1.4170 IN
  (1)
• 2.2220 IN X 0.6230 IN X 1.4460 IN
  (1)
• 2.4090 IN X 0.5740 IN X 1.6100 IN
  (2)
• 2.7190 IN X 0.6020 IN X 1.8930 IN
  (2)
• 3.0750 IN X 0.6940 IN X 12.3100 IN
  (1)
• 3.0750 IN X 0.6940 IN X 2.3100 IN
  (1)
• 3.5290 IN X 0.6730 IN X 2.5020 IN
  (2)
• 3.8520 IN X 0.6790 IN X 3.0730 IN
  (2)
• 4.6680 IN X 0.8790 IN X 3.7080 IN
  (1)
• 5.3350 IN X 0.8990 IN X 4.4640 IN
  (1)
• 1.5720 IN X 0.5720 IN X 1.0500 IN
  (1)
• 2.1610 IN X 0.5920 IN X 1.3560 IN
  (1)
• 2.4680 IN X 0.6050 IN X 1.5850 IN
  (1)
• 2.7440 IN X 0.5780 IN X 1.8350 IN
  (1)
• 3.0430 IN X 0.5810 IN X 2.1030 IN
  (1)
• 3.6150 IN X 0.6470 IN X 2.6670 IN
  (1)
• 1.8120 IN X 1.3440 IN X 0.5630 IN
  (2)
• 2.0470 IN X 1.5620 IN X 0.5630 IN
  (2)
• 2.2500 IN X 1.7500 IN X 0.5630 IN
  (2)
• 2.6880 IN X 2.1880 IN X 0.5630 IN
  (2)
• 2.9530 IN X 2.5000 IN X 0.5630 IN
  (2)
• 3.2810 IN X 2.8120 IN X 0.5630 IN
  (2)
• 3.8130 IN X 3.2500 IN X 0.5630 IN
  (2)
• 4.7500 IN X 3.9380 IN X 0.7190 IN
  (2)
• 5.5630 IN X 4.6240 IN X 0.7810 IN
  (2)
• 6.6880 IN X 5.7500 IN X 1.1880 IN
  (2)
• 1.6720 IN X 1.0940 IN X 0.5470 IN
  (1)
• 1.7810 IN X 1.4380 IN X 0.5470 IN
  (1)
• 1.9380 IN X 1.7820 IN X 0.5470 IN
  (1)
• 2.2810 IN X 2.0620 IN X 0.5470 IN
  (1)
• 2.6250 IN X 2.2500 IN X 0.5470 IN
  (1)
• 2.9060 IN X 2.5000 IN X 0.5470 IN
  (1)
• 3.4380 IN X 3.0000 IN X 0.5470 IN
  (1)
• 2.8750 IN X 1.3750 IN X 0.1880 IN
  (2)
• 2.8750 IN X 1.3750 IN X 0.5000 IN
  (3)
• X X 2.6880 IN
  (2)
• X X 2.6300 IN
  (1)
• X X 1.6875 IN
  (1)
• X X 3.6250 IN
  (3)
• X X 3.3750 IN
  (1)
• 1.5000 IN X 1.5000 IN X 5.2500 IN
  (1)
• 0.5630 IN X 0.6250 IN X 2.0636 IN
  (1)
• 0.6800 IN X 0.5000 IN X 2.0630 IN
  (1)
• 0.7500 IN X 0.6250 IN X 2.0630 IN
  (1)
• 0.8750 IN X 0.6250 IN X 2.8750 IN
  (1)
• 0.8750 IN X 0.7500 IN X 3.0000 IN
  (1)
• X X 1.3750 IN
  (5)
• X X 1.1250 IN
  (3)
• X X 1.5000 IN
  (12)
• X X 3.8700 IN
  (2)
• 4.0000 IN X 0.2940 IN X 4.2500 IN
  (1)
• 2.5000 IN X 0.5600 IN X 4.2500 IN
  (1)
• 4.2500 IN X 0.5600 IN X 5.3400 IN
  (1)
• 0.7500 IN X 1.0000 IN X 4.5000 IN
  (1)
• 1.0000 IN X 0.1500 IN X 4.5000 IN
  (1)
• 8.0000 IN X 0.5000 IN X 1.2500 IN
  (1)
• X X 1.0000 IN
  (14)
• X X 1.7500 IN
  (2)
• X X 2.5000 IN
  (6)
• X X 4.5000 IN
  (2)
• 3.7500 IN X 0.7520 IN X 4.5300 IN
  (1)
• 4.2500 IN X 0.5600 IN X 8.1800 IN
  (1)
• 4.2500 IN X 0.5600 IN X 11.0200 IN
  (1)
• 2.0000 IN X 1.2500 IN X 2.5000 IN
  (1)
• 120.0000 IN X 1.6000 IN X 3.1000 IN
  (1)
• 240.0000 IN X 1.6000 IN X 3.1000 IN
  (1)
• 120.0000 IN X 1.6000 IN X 2.8000 IN
  (1)
• 240.0000 IN X 1.6000 IN X 2.8000 IN
  (1)
• 1.2500 IN X 0.3125 IN X 1.2500 IN
  (8)
• 1.3750 IN X 1.2300 IN X 0.8500 IN
  (5)
• 1.3750 IN X 0.8500 IN X 0.8500 IN
  (4)
• 1.3750 IN X 0.8500 IN X 0.2500 IN
  (10)
• 1.3750 IN X 0.8500 IN X 0.3750 IN
  (5)
• 1.8750 IN X 1.3750 IN X 0.8500 IN
  (13)
• 1.7500 IN X 1.3750 IN X 0.8500 IN
  (10)
• 2.0000 IN X 1.3750 IN X 0.5000 IN
  (2)
• 1.3750 IN X 1.2300 IN X 1.2300 IN
  (1)
• 1.3750 IN X 0.8500 IN X 0.7000 IN
  (2)
• 1.3750 IN X 0.8500 IN X 0.8250 IN
  (2)
• 1.3750 IN X 0.3750 IN X 0.8500 IN
  (1)
• 2.0000 IN X 1.3750 IN X 0.8500 IN
  (1)
• 2.0000 IN X 1.3100 IN X 0.8500 IN
  (4)
• 1.3750 IN X 1.3750 IN X 0.8500 IN
  (1)
• 1.3750 IN X 1.2300 IN X 0.5000 IN
  (1)
• 0.9200 IN X 0.7210 IN X 0.4250 IN
  (6)
• 0.7210 IN X 0.6700 IN X 0.4250 IN
  (3)
• 1.0000 IN X 1.3100 IN X 0.8500 IN
  (2)
• 1.2500 IN X 1.3100 IN X 0.8500 IN
  (3)
• 2.6250 IN X 1.3100 IN X 0.8500 IN
  (1)
• 2.8750 IN X 1.3100 IN X 0.8500 IN
  (1)
• 1.0000 IN X 1.6250 IN X 0.8250 IN
  (2)
• 1.5000 IN X 0.6250 IN X 1.5000 IN
  (1)
• X X 1.2500 IN
  (13)
• X X 0.5000 IN
  (5)
• 0.9380 IN X 0.5060 IN X 0.4380 IN
  (1)
• 0.7490 IN X 0.7490 IN X 0.0800 IN
  (1)
• 1.4050 IN X 1.4050 IN X 0.1320 IN
  (1)
• 1.7800 IN X 1.7800 IN X 0.1600 IN
  (1)
• 0.4890 IN X 0.4890 IN X 0.0620 IN
  (1)
• 0.5830 IN X 0.5830 IN X 0.0780 IN
  (1)
• 0.6830 IN X 0.6830 IN X 0.0940 IN
  (1)
• 0.8730 IN X 0.8730 IN X 0.1250 IN
  (1)
• 1.0790 IN X 1.0790 IN X 0.1560 IN
  (1)
• 0.5050 IN X 0.4380 IN X 0.2260 IN
  (1)
• 0.5770 IN X 0.5000 IN X 0.2730 IN
  (1)
• 0.6500 IN X 0.5620 IN X 0.3370 IN
  (1)
• 0.8660 IN X 0.7500 IN X 0.4480 IN
  (1)
• 0.6500 IN X 0.5620 IN X 0.7500 IN
  (1)
• 1.2800 IN X 1.2800 IN X 0.0800 IN
  (2)
• 1.5000 IN X 1.5000 IN X 0.0800 IN
  (1)
• 1.5300 IN X 1.5300 IN X 0.0800 IN
  (1)
• 2.0300 IN X 2.0300 IN X 0.0800 IN
  (1)
• 2.3100 IN X 1.6200 IN X 2.3100 IN
  (5)
• 3.5000 IN X 1.6200 IN X 2.2500 IN
  (4)
• 4.1200 IN X 1.6200 IN X 4.1200 IN
  (5)
• 4.1250 IN X 1.6250 IN X 3.5000 IN
  (10)
• 3.5000 IN X 1.6200 IN X 1.6200 IN
  (3)
• 3.5000 IN X 1.6200 IN X 1.0000 IN
  (1)
• 3.5000 IN X 1.6200 IN X 2.4300 IN
  (1)
• 3.5000 IN X 1.6200 IN X 0.8110 IN
  (1)
• 5.4300 IN X 1.6200 IN X 1.6200 IN
  (4)
• 5.4300 IN X 1.6200 IN X 3.2500 IN
  (4)
• 3.5000 IN X 1.6200 IN X 2.1200 IN
  (1)
• 1.6200 IN X 1.6200 IN X 1.8700 IN
  (1)
• 6.6200 IN X 1.6200 IN X 3.7400 IN
  (1)
• 8.6200 IN X 1.8700 IN X 3.7500 IN
  (1)
• 3.7500 IN X 1.6200 IN X 3.9300 IN
  (6)
• 5.4300 IN X 1.6200 IN X 1.3700 IN
  (1)
• 5.4300 IN X 1.6200 IN X 2.4300 IN
  (1)
• 5.4300 IN X 1.6200 IN X 1.0000 IN
  (1)
• 5.4300 IN X 1.6200 IN X 0.8110 IN
  (2)
• 3.5000 IN X 1.6200 IN X 4.1200 IN
  (2)
• 3.5000 IN X 1.6200 IN X 2.0600 IN
  (4)
• 3.5000 IN X 1.6200 IN X 3.9300 IN
  (1)
• 5.3700 IN X 3.5000 IN X 3.9300 IN
  (2)
• 5.4300 IN X 1.6800 IN X 2.0600 IN
  (4)
• 9.1800 IN X 1.6800 IN X 3.9300 IN
  (5)
• 5.4300 IN X 1.6800 IN X 3.9300 IN
  (4)
• 3.5000 IN X 1.6200 IN X 2.3100 IN
  (1)
• 3.5000 IN X 3.5000 IN X 4.2000 IN
  (1)
• 3.5000 IN X 1.6200 IN X 0.2300 IN
  (3)
• 3.9300 IN X 1.8700 IN X 3.5000 IN
  (2)
• 3.5000 IN X 1.6200 IN X 4.2000 IN
  (3)
• 7.6200 IN X 1.6200 IN X 7.6200 IN
  (1)
• 6.5000 IN X 1.6200 IN X 0.2300 IN
  (2)
• 5.3700 IN X 1.6200 IN X 0.2300 IN
  (2)
• 5.3700 IN X 3.5000 IN X 3.5000 IN
  (1)
• 5.3700 IN X 3.5000 IN X 0.2200 IN
  (5)
• 3.2500 IN X 1.6200 IN X 2.3700 IN
  (2)
• 4.4830 IN X 2.3500 IN X 1.6200 IN
  (4)
• 4.4800 IN X 2.3500 IN X 1.6200 IN
  (4)
• 2.5000 IN X 1.6200 IN X 3.1800 IN
  (1)
• 4.3700 IN X 1.6200 IN X 3.3100 IN
  (3)
• 7.2400 IN X 1.6800 IN X 1.6200 IN
  (3)
• 7.2400 IN X 1.6800 IN X 0.8100 IN
  (1)
• 7.2400 IN X 2.1200 IN X 0.8100 IN
  (2)
• 5.3700 IN X 2.1200 IN X 0.8100 IN
  (1)
• 3.5000 IN X 2.1200 IN X 0.8100 IN
  (1)
• 3.5000 IN X 2.1200 IN X 1.6200 IN
  (1)
• 5.3700 IN X 2.1200 IN X 1.6200 IN
  (1)
• 7.2400 IN X 2.1200 IN X 1.6200 IN
  (4)
• 7.2400 IN X 2.1200 IN X 2.4300 IN
  (1)
• 7.2400 IN X 2.1200 IN X 3.2500 IN
  (2)
• 3.3100 IN X 1.8700 IN X 3.3100 IN
  (1)
• 12.0000 IN X 1.6200 IN X 3.4300 IN
  (3)
• 16.0000 IN X 1.6200 IN X 4.4300 IN
  (2)
• 18.0000 IN X 1.6200 IN X 4.9300 IN
  (2)
• 6.0000 IN X 1.6200 IN X 1.9300 IN
  (2)
• 8.0000 IN X 1.6200 IN X 2.4300 IN
  (2)
• 10.0000 IN X 1.6200 IN X 2.9300 IN
  (3)
• 9.0000 IN X 1.6200 IN X 4.0000 IN
  (2)
• 12.0000 IN X 1.6200 IN X 4.0000 IN
  (1)
• 15.0000 IN X 1.6200 IN X 4.0000 IN
  (1)
• 24.0000 IN X 1.6200 IN X 6.0000 IN
  (1)
• 3.7500 IN X 1.6200 IN X 6.3700 IN
  (1)
• 18.0000 IN X 1.6200 IN X 5.3700 IN
  (2)
• 24.0000 IN X 1.6200 IN X 5.3700 IN
  (2)
• 6.0000 IN X 1.6200 IN X 3.5000 IN
  (5)
• 12.0000 IN X 1.6200 IN X 3.5000 IN
  (6)
• 1.6200 IN X 1.6200 IN X 1.0100 IN
  (1)
• 1.6200 IN X 1.6200 IN X 0.8200 IN
  (3)
• 1.6200 IN X 1.6200 IN X 1.6400 IN
  (7)
• 1.6200 IN X 1.6200 IN X 1.3900 IN
  (2)
• 1.5000 IN X 0.7500 IN X 7.2500 IN
  (2)
• 1.5000 IN X 3.7500 IN X 7.5000 IN
  (1)
• 1.2500 IN X 2.0000 IN X 0.8750 IN
  (1)
• 2.0000 IN X 2.0000 IN X 0.9670 IN
  (1)
• 2.5000 IN X 1.2500 IN X 7.2500 IN
  (1)
• 3.0000 IN X 1.2500 IN X 5.3700 IN
  (1)
• 1.6500 IN X 1.6200 IN X 3.5000 IN
  (1)
• 2.6250 IN X 1.6250 IN X 2.6250 IN
  (1)
• 7.2500 IN X 1.6200 IN X 2.6200 IN
  (1)
• 8.0000 IN X 1.6200 IN X 2.6200 IN
  (1)
• 9.0000 IN X 1.6200 IN X 2.6200 IN
  (1)
• 10.0000 IN X 1.6200 IN X 2.6200 IN
  (1)
• 10.8700 IN X 1.6200 IN X 2.6200 IN
  (1)
• 11.6200 IN X 1.6200 IN X 2.6200 IN
  (1)
• 1.6200 IN X 1.6200 IN X 2.4500 IN
  (1)
• 1.6200 IN X 1.6200 IN X 3.2600 IN
  (1)
• 1.8700 IN X 1.6200 IN X 2.0600 IN
  (6)
• 2.2500 IN X 1.6200 IN X 2.2500 IN
  (4)
• 1.8700 IN X 1.6200 IN X 3.9300 IN
  (4)
• 2.0600 IN X 1.8700 IN X 3.5000 IN
  (2)
• 4.8700 IN X 1.6200 IN X 2.0000 IN
  (1)
• 3.7500 IN X 2.0600 IN X 3.5000 IN
  (1)
• 6.7800 IN X 1.6200 IN X 0.6800 IN
  (1)
• 6.7500 IN X 1.6200 IN X 1.1100 IN
  (1)
• 6.6500 IN X 1.6200 IN X 1.5300 IN
  (1)
• 6.5000 IN X 1.6200 IN X 1.9500 IN
  (1)
• 6.0300 IN X 1.6200 IN X 2.7000 IN
  (4)
• 5.3500 IN X 1.6200 IN X 3.3200 IN
  (1)
• 12.0000 IN X 1.6200 IN X 10.1200 IN
  (2)
• 16.0000 IN X 1.6200 IN X 13.3700 IN
  (1)
• 16.6200 IN X 1.6200 IN X 13.3700 IN
  (1)
• 18.0000 IN X 1.6200 IN X 14.4300 IN
  (2)
• 7.0300 IN X 1.6200 IN X 1.6200 IN
  (1)
• 3.5000 IN X 3.5000 IN X 3.9300 IN
  (3)
• 5.3700 IN X 1.6200 IN X 3.9300 IN
  (3)
• 3.8100 IN X 1.6800 IN X 2.0600 IN
  (2)
• 5.6700 IN X 1.6800 IN X 3.9300 IN
  (3)
• 4.0000 IN X 1.6200 IN X 4.0000 IN
  (3)
• 5.0000 IN X 5.0000 IN X 3.5000 IN
  (2)
• 6.0000 IN X 6.0000 IN X 1.6200 IN
  (8)
• 6.0000 IN X 6.0000 IN X 3.5000 IN
  (20)
• 1.5900 IN X 0.7800 IN X 0.6300 IN
  (3)
• 1.5900 IN X 1.5900 IN X 0.6300 IN
  (3)
• 1.5900 IN X 1.5900 IN X 0.2200 IN
  (3)
• 12.5000 IN X 1.6200 IN X 6.0000 IN
  (2)
• 14.5000 IN X 1.6200 IN X 6.0000 IN
  (2)
• 16.5000 IN X 1.6200 IN X 6.0000 IN
  (2)
• 18.5000 IN X 1.6200 IN X 6.0000 IN
  (1)
• 20.5000 IN X 1.6200 IN X 6.0000 IN
  (2)
• 18.0000 IN X 1.6200 IN X 3.5000 IN
  (2)
• 24.0000 IN X 1.6200 IN X 3.5000 IN
  (2)
• 12.0000 IN X 1.6200 IN X 6.2500 IN
  (1)
• 18.0000 IN X 1.6200 IN X 6.2500 IN
  (2)
• 24.0000 IN X 1.6200 IN X 6.2500 IN
  (3)
• 30.0000 IN X 1.6200 IN X 6.2500 IN
  (1)
• 36.0000 IN X 1.6200 IN X 6.2500 IN
  (2)
• 3.0000 IN X 0.3750 IN X 2.3125 IN
  (1)
• 2.5000 IN X 0.5000 IN X 2.3125 IN
  (1)
• 2.5000 IN X 0.4670 IN X 2.3125 IN
  (1)
• 2.5000 IN X 0.4670 IN X 2.4375 IN
  (3)
• 2.5000 IN X 0.4670 IN X 2.5625 IN
  (3)
• 9.0000 IN X 6.0000 IN X 0.2500 IN
  (1)
• 12.0000 IN X 9.0000 IN X 0.2500 IN
  (1)
• 15.0000 IN X 6.0000 IN X 0.2500 IN
  (1)
• 18.0000 IN X 15.0000 IN X 0.2500 IN
  (1)
• 3.2500 IN X 0.6250 IN X 3.5625 IN
  (4)
• 3.2500 IN X 0.6250 IN X 3.7188 IN
  (2)
• 3.3700 IN X 1.6200 IN X 1.7500 IN
  (3)
• 7.5000 IN X 1.6200 IN X 1.8500 IN
  (1)
• 10.3700 IN X 1.6200 IN X 1.8500 IN
  (1)
• 9.1200 IN X 1.6200 IN X 5.3700 IN
  (1)
• 9.1200 IN X 1.6200 IN X 3.5000 IN
  (1)
• 3.2500 IN X 1.6200 IN X 1.6200 IN
  (2)
• 9.1300 IN X 1.6200 IN X 1.6200 IN
  (2)
• 3.5000 IN X 1.6200 IN X 5.3800 IN
  (1)
• 1.6500 IN X 1.6200 IN X 3.9300 IN
  (2)
• 1.6500 IN X 3.5000 IN X 3.9300 IN
  (2)
• 1.8438 IN X 1.6250 IN X 1.8400 IN
  (4)
• 2.0600 IN X 1.6200 IN X 5.3700 IN
  (1)
• 5.0000 IN X 1.8700 IN X 1.6200 IN
  (1)
• 4.0000 IN X 1.8700 IN X 1.6200 IN
  (1)
• 3.0000 IN X 1.6200 IN X 1.8700 IN
  (2)
• 4.0000 IN X 1.6200 IN X 1.8700 IN
  (1)
• 3.7500 IN X 1.6200 IN X 8.0000 IN
  (1)
• 5.0000 IN X 1.6200 IN X 4.3700 IN
  (5)
• 2.6200 IN X 1.6200 IN X 2.0000 IN
  (3)
• 2.6200 IN X 1.6200 IN X 1.6200 IN
  (1)
• 2.0600 IN X 1.6200 IN X 3.7500 IN
  (2)
• 3.3100 IN X 1.6200 IN X 3.3700 IN
  (1)
• 7.6200 IN X 1.6200 IN X 2.3700 IN
  (1)
• 9.6200 IN X 1.6200 IN X 4.3700 IN
  (1)
• 11.6200 IN X 1.6200 IN X 6.3700 IN
  (1)
• X X 2.5940 IN
  (1)
• 1.4380 IN X 1.3750 IN X 1.1200 IN
  (1)
• 1.6200 IN X 1.6200 IN X 3.7700 IN
  (1)
• 1.8700 IN X 1.6300 IN X 1.8700 IN
  (1)
• 1.7800 IN X 3.4375 IN X 1.6563 IN
  (1)
• 4.0000 IN X 1.6200 IN X 3.5000 IN
  (1)
• 9.0000 IN X 1.6200 IN X 4.6200 IN
  (3)
• 12.0000 IN X 1.6200 IN X 4.6200 IN
  (4)
• 14.0000 IN X 1.6200 IN X 4.6200 IN
  (1)
• 6.0000 IN X 1.6200 IN X 4.6200 IN
  (2)
• 0.8100 IN X 1.6200 IN X 1.6200 IN
  (1)
• 0.8100 IN X 1.6200 IN X 0.8100 IN
  (1)
• 18.0000 IN X 1.6200 IN X 1.6200 IN
  (1)
• 5.4300 IN X 1.6200 IN X 1.8700 IN
  (1)
• 1.8700 IN X 1.6200 IN X 3.8700 IN
  (1)
• 1.8700 IN X 1.6200 IN X 5.8700 IN
  (1)
• 1.8700 IN X 1.6200 IN X 7.8700 IN
  (1)
• 1.8700 IN X 1.6200 IN X 9.8700 IN
  (1)
• 0.5000 IN X 2.3750 IN X 2.7500 IN
  (1)
• 0.7500 IN X 2.3750 IN X 2.7500 IN
  (1)
• 1.0000 IN X 2.8750 IN X 3.0000 IN
  (1)
• 1.2500 IN X 2.8750 IN X 3.0000 IN
  (1)
• 1.5000 IN X 3.2500 IN X 3.0000 IN
  (1)
• 2.0000 IN X 3.6875 IN X 3.2500 IN
  (1)
• 2.5000 IN X 4.2500 IN X 3.7500 IN
  (1)
• 3.0000 IN X 4.8750 IN X 4.0000 IN
  (1)
• 4.0000 IN X 6.0000 IN X 4.5000 IN
  (1)
• 5.4300 IN X 1.6200 IN X 3.5000 IN
  (1)
• 2.0000 IN X 1.5000 IN X 2.8750 IN
  (1)
• 5.7500 IN X 1.6200 IN X 3.5000 IN
  (1)
• 2.0000 IN X 1.2500 IN X 2.3750 IN
  (1)
• 1.3900 IN X 0.5000 IN X 0.2890 IN
  (1)
• 3.0000 IN X 2.3750 IN X 3.3750 IN
  (6)
• 3.0000 IN X 1.3750 IN X 1.3750 IN
  (1)
• 3.0000 IN X 1.8750 IN X 1.8750 IN
  (1)
• 3.0000 IN X 2.5000 IN X 2.3750 IN
  (1)
• 1.7500 IN X 1.7500 IN X 1.7500 IN
  (3)
• 2.7500 IN X 1.7500 IN X 1.7500 IN
  (4)
• 5.6200 IN X 1.6200 IN X 0.6200 IN
  (2)
• 1.6200 IN X 0.8100 IN X 0.4600 IN
  (7)
• 1.5000 IN X 1.6200 IN X 1.7500 IN
  (2)
• 3.0000 IN X 1.6250 IN X 3.9300 IN
  (2)
• 1.8700 IN X 1.6200 IN X 6.8700 IN
  (2)
• 1.8700 IN X 1.6200 IN X 4.8700 IN
  (2)
• 3.3750 IN X 1.6563 IN X 2.5000 IN
  (1)
• 5.0000 IN X 1.6563 IN X 2.5000 IN
  (1)
• X X 1.8800 IN
  (1)
• X X 3.5000 IN
  (1)
• X X 4.0600 IN
  (1)
• X X 4.5600 IN
  (1)
• X X 5.0000 IN
  (1)
• X X 6.2500 IN
  (1)
• X X 8.6300 IN
  (1)
• 5.3700 IN X 1.6200 IN X 4.1800 IN
  (4)
• 3.5000 IN X 1.6200 IN X 3.2500 IN
  (1)
• 3.6200 IN X 1.6200 IN X 5.3700 IN
  (2)
• 10.0000 IN X 5.5000 IN X 7.2500 IN
  (2)
• 2.0000 IN X 1.6200 IN X 1.8700 IN
  (2)
• 3.4600 IN X 1.6200 IN X 1.6200 IN
  (2)
• 4.8700 IN X 3.0000 IN X 1.6200 IN
  (1)
• 4.1200 IN X 1.6200 IN X 5.3700 IN
  (2)
• 10.5000 IN X 1.6200 IN X 4.0000 IN
  (1)
• 3.2500 IN X 1.6200 IN X 2.2500 IN
  (1)
• 6.0000 IN X 1.6200 IN X 6.0000 IN
  (1)
• 8.8700 IN X 1.6200 IN X 1.8700 IN
  (1)
• 7.0600 IN X 1.6200 IN X 1.6200 IN
  (1)
• 5.3700 IN X 1.6200 IN X 2.6800 IN
  (1)
• 5.4300 IN X 1.6200 IN X 4.8700 IN
  (1)
• 1.3700 IN X 1.6200 IN X 1.5000 IN
  (1)
• 2.5000 IN X 1.4375 IN X 2.5000 IN
  (1)
• 1.6200 IN X 1.6200 IN X 2.2500 IN
  (1)
• 3.5000 IN X 1.6250 IN X 3.5000 IN
  (3)
• 1.6500 IN X 1.6200 IN X 6.2500 IN
  (1)
• 18.0000 IN X 1.6200 IN X 1.7500 IN
  (2)
• 24.0000 IN X 1.6200 IN X 1.7500 IN
  (1)
• 30.0000 IN X 1.6200 IN X 1.7500 IN
  (1)
• 36.0000 IN X 1.6200 IN X 1.7500 IN
  (1)
• X X 0.2500 IN
  (2)
• X X 0.3125 IN
  (1)
• X X 0.3750 IN
  (5)
• X X 0.6250 IN
  (5)
• 5.6200 IN X 1.6200 IN X 2.5000 IN
  (1)
• 1.8438 IN X 1.6250 IN X 2.0000 IN
  (4)
• 2.0000 IN X 2.0000 IN X 3.0000 IN
  (4)
• 11.0000 IN X 3.1250 IN X 7.0000 IN
  (1)
• 4.5000 IN X 3.0000 IN X 3.2500 IN
  (1)
• 4.0000 IN X 0.3750 IN X 4.0000 IN
  (1)
• 6.0000 IN X 0.3750 IN X 6.0000 IN
  (1)
• X X 8.5000 IN
  (1)
• X X 11.5000 IN
  (1)
• X X 14.5000 IN
  (1)
• 8.0000 IN X 3.0000 IN X 1.6200 IN
  (4)
• 8.0000 IN X 3.0000 IN X 3.5000 IN
  (5)
• 2.3750 IN X 0.3750 IN X 2.3750 IN
  (2)
• 2.3750 IN X 0.5000 IN X 2.3750 IN
  (2)
• 2.2500 IN X 0.6250 IN X 2.3750 IN
  (2)
• 3.2500 IN X 0.7500 IN X 2.3750 IN
  (1)
• 3.2500 IN X 0.8750 IN X 3.0000 IN
  (2)
• 3.2500 IN X 1.6200 IN X 5.3700 IN
  (1)
• 5.3700 IN X 1.6200 IN X 1.8700 IN
  (2)
• X X 8.7500 IN
  (1)
• 2.8125 IN X 2.8125 IN X 2.8125 IN
  (1)
• 1.8700 IN X 3.9300 IN X 5.3700 IN
  (1)
• X X 14.7500 IN
  (1)
• X X 7.3750 IN
  (1)
• X X 11.3750 IN
  (1)
• 4.0000 IN X 3.0000 IN X 5.0000 IN
  (2)
• 6.0000 IN X 3.0000 IN X 5.0000 IN
  (2)
• 9.0000 IN X 3.0000 IN X 5.0000 IN
  (2)
• 4.5000 IN X 1.6200 IN X 3.2500 IN
  (2)
• 4.5000 IN X 1.6200 IN X 2.4300 IN
  (1)
• 4.5000 IN X 1.6200 IN X 1.6200 IN
  (3)
• 4.5000 IN X 1.6200 IN X 1.6300 IN
  (1)
• 4.5000 IN X 1.6200 IN X 0.8100 IN
  (1)
• 2.3100 IN X 1.6200 IN X 3.2500 IN
  (1)
• 2.3100 IN X 1.6200 IN X 1.6200 IN
  (1)
• 4.0000 IN X 1.7800 IN X 4.0000 IN
  (7)
• X X 17.7500 IN
  (1)
• 12.0000 IN X 1.6200 IN X 8.7500 IN
  (1)
• 18.0000 IN X 1.6200 IN X 8.7500 IN
  (1)
• 24.0000 IN X 1.6200 IN X 8.7500 IN
  (1)
• 30.0000 IN X 1.6200 IN X 11.2500 IN
  (1)
• 36.0000 IN X 1.6200 IN X 11.2500 IN
  (1)
• 42.0000 IN X 1.6200 IN X 16.0000 IN
  (1)
• 48.0000 IN X 1.6200 IN X 16.0000 IN
  (1)
• 9.1800 IN X 1.6200 IN X 3.8700 IN
  (2)
• 0.4900 IN X 1.2500 IN X 1.2200 IN
  (2)
• 0.6100 IN X 1.2500 IN X 1.3600 IN
  (2)
• 0.7400 IN X 1.2500 IN X 1.4900 IN
  (2)
• 0.8600 IN X 1.2500 IN X 1.6200 IN
  (2)
• 1.1500 IN X 1.2500 IN X 1.8700 IN
  (2)
• 1.2700 IN X 1.2500 IN X 2.0000 IN
  (2)
• 2.2000 IN X 1.2500 IN X 3.0000 IN
  (2)
• 3.1760 IN X 1.6250 IN X 3.1760 IN
  (1)
• 3.8570 IN X 1.6250 IN X 1.5960 IN
  (1)
• 4.6540 IN X 1.6250 IN X 1.9060 IN
  (1)
• 7.5220 IN X 1.6250 IN X 3.0310 IN
  (1)
• 10.6950 IN X 1.6250 IN X 4.2810 IN
  (1)
• 1.9370 IN X 1.2500 IN X 0.0635 IN
  (2)
• 2.1560 IN X 1.2500 IN X 0.0635 IN
  (1)
• 2.1560 IN X 1.2500 IN X 0.0625 IN
  (1)
• 2.3750 IN X 1.2500 IN X 0.0677 IN
  (2)
• 2.6250 IN X 1.2500 IN X 0.0677 IN
  (2)
• 3.0310 IN X 1.2500 IN X 0.0677 IN
  (2)
• 3.3750 IN X 1.2500 IN X 0.0966 IN
  (2)
• 4.0000 IN X 1.2500 IN X 0.0966 IN
  (2)
• 2.0550 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.2220 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.5010 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.7540 IN X 1.2500 IN X 0.0705 IN
  (2)
• 3.1890 IN X 1.2500 IN X 0.0705 IN
  (2)
• 3.5730 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.1640 IN X 1.2500 IN X 0.0994 IN
  (2)
• 2.3960 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.6080 IN X 1.2500 IN X 0.0705 IN
  (2)
• 2.9510 IN X 1.2500 IN X 0.0705 IN
  (2)
• 3.3510 IN X 1.2500 IN X 0.0705 IN
  (2)
• 3.7800 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.3940 IN X 1.2500 IN X 0.0994 IN
  (2)
• 5.0390 IN X 1.2500 IN X 0.0994 IN
  (2)
• 5.8430 IN X 1.2500 IN X 0.0994 IN
  (2)
• 6.1410 IN X 1.2500 IN X 0.0994 IN
  (2)
• 6.7030 IN X 1.2500 IN X 0.0994 IN
  (2)
• 7.2970 IN X 1.2500 IN X 0.1200 IN
  (2)
• 7.9690 IN X 1.2500 IN X 0.1200 IN
  (2)
• 9.8750 IN X 1.2500 IN X 0.1200 IN
  (2)
• 11.1880 IN X 1.2500 IN X 0.1200 IN
  (2)
• 12.3750 IN X 1.2500 IN X 0.1200 IN
  (2)
• 15.2570 IN X 1.2500 IN X 0.1200 IN
  (1)
• 17.8270 IN X 1.2500 IN X 0.1200 IN
  (1)
• 1.6170 IN X 1.2500 IN X 0.0625 IN
  (2)
• 1.7890 IN X 1.2500 IN X 0.0625 IN
  (2)
• 0.5000 IN X 1.2500 IN X 0.0625 IN
  (2)
• 0.5000 IN X 1.2500 IN X 0.0600 IN
  (2)
• 2.1170 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.1170 IN X 1.2500 IN X 0.0600 IN
  (2)
• 2.2790 IN X 1.2500 IN X 0.0625 IN
  (2)
• 2.7050 IN X 1.2500 IN X 0.0705 IN
  (2)
• 2.7050 IN X 1.2500 IN X 0.0677 IN
  (2)
• 2.8660 IN X 1.2500 IN X 0.0705 IN
  (1)
• 4.0720 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.0720 IN X 1.2500 IN X 0.0966 IN
  (2)
• 4.2330 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.5550 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.7160 IN X 1.2500 IN X 0.0994 IN
  (2)
• 4.7160 IN X 1.2500 IN X 0.0966 IN
  (1)
• 4.7160 IN X 1.2500 IN X 0.0996 IN
  (1)
• 4.8770 IN X 1.2500 IN X 0.0994 IN
  (1)
• 5.3600 IN X 1.2500 IN X 0.0994 IN
  (1)
• 5.5210 IN X 1.2500 IN X 0.0994 IN
  (1)
• 5.6830 IN X 1.2500 IN X 0.0994 IN
  (2)
• 5.7030 IN X 1.2500 IN X 0.0994 IN
  (2)
• 5.8440 IN X 1.2500 IN X 0.0994 IN
  (1)
• 5.9840 IN X 1.2500 IN X 0.0994 IN
  (1)
• 6.2810 IN X 1.2500 IN X 0.0994 IN
  (1)
• 6.2810 IN X 1.2500 IN X 0.0966 IN
  (1)
• 6.4220 IN X 1.2500 IN X 0.0994 IN
  (1)
• 6.4060 IN X 1.2500 IN X 0.0994 IN
  (1)
• 6.8590 IN X 1.2500 IN X 0.1200 IN
  (1)
• 7.0000 IN X 1.2500 IN X 0.1200 IN
  (1)
• 7.1410 IN X 1.2500 IN X 0.1200 IN
  (1)
• 7.9380 IN X 1.2500 IN X 0.1200 IN
  (1)
• 7.5780 IN X 1.2500 IN X 0.1200 IN
  (1)
• 8.1870 IN X 1.2500 IN X 0.1200 IN
  (1)
• 8.5510 IN X 1.2500 IN X 0.1200 IN
  (1)
• 8.6620 IN X 1.2500 IN X 0.1200 IN
  (1)
• 8.9040 IN X 1.2500 IN X 0.1200 IN
  (1)
• 9.3150 IN X 1.2500 IN X 0.1200 IN
  (1)
• 9.4750 IN X 1.2500 IN X 0.1200 IN
  (1)
• 9.6360 IN X 1.2500 IN X 0.1200 IN
  (1)
• 9.7970 IN X 1.2500 IN X 0.1200 IN
  (1)
• 10.1180 IN X 1.2500 IN X 0.1200 IN
  (1)
• 11.0810 IN X 1.2500 IN X 0.1200 IN
  (1)
• 11.8840 IN X 1.2500 IN X 0.1200 IN
  (1)
• 1.2500 IN X 1.6200 IN X 0.8100 IN
  (5)
• 0.8700 IN X 1.6200 IN X 0.0620 IN
  (1)
• 0.3100 IN X 1.6200 IN X 0.0940 IN
  (1)
• 0.3700 IN X 1.6200 IN X 0.1250 IN
  (1)
• 0.5000 IN X 1.6200 IN X 0.1880 IN
  (1)
• 0.7500 IN X 1.6200 IN X 0.3120 IN
  (1)
• 2.8100 IN X 1.6200 IN X 0.5000 IN
  (1)
• 3.0000 IN X 1.6200 IN X 0.7500 IN
  (1)
• 3.5300 IN X 1.6200 IN X 1.0000 IN
  (1)
• 3.7500 IN X 1.6200 IN X 1.2500 IN
  (1)
• 4.0600 IN X 1.6200 IN X 1.5000 IN
  (1)
• 5.6500 IN X 1.6200 IN X 2.0000 IN
  (1)
• 6.1500 IN X 1.6200 IN X 2.5000 IN
  (1)
• 3.0000 IN X 1.6200 IN X 3.0000 IN
  (1)
• 7.2800 IN X 1.6200 IN X 3.5000 IN
  (1)
• 7.7800 IN X 1.6200 IN X 4.0000 IN
  (1)
• 8.8700 IN X 1.6200 IN X 5.0000 IN
  (1)
• 9.9300 IN X 1.6200 IN X 6.0000 IN
  (1)
• 11.9600 IN X 1.6200 IN X 8.0000 IN
  (1)
• 3.2500 IN X 2.0000 IN X 1.5630 IN
  (1)
• 5.1660 IN X 1.6250 IN X 2.6250 IN
  (1)
• 3.0000 IN X 2.2500 IN X 1.3700 IN
  (1)
• 4.0000 IN X 2.2500 IN X 2.6200 IN
  (1)
• X X 72.0000 IN
  (8)
• X X 120.0000 IN
  (15)
• X X 144.0000 IN
  (9)
• 2.0000 IN X 1.1250 IN X 2.2500 IN
  (1)
• 2.1875 IN X 1.2500 IN X 2.3125 IN
  (1)
• 2.5000 IN X 1.3750 IN X 2.6250 IN
  (1)
• 2.5000 IN X 1.4375 IN X 2.6875 IN
  (1)
• 2.0000 IN X 0.8750 IN X 1.6250 IN
  (1)
• 2.1875 IN X 1.1875 IN X 1.8125 IN
  (1)
• 1.7500 IN X 0.3750 IN X 1.7500 IN
  (2)
• 1.7500 IN X 0.5000 IN X 1.7500 IN
  (1)
• 1.7500 IN X 0.7500 IN X 1.7500 IN
  (1)
• 1.8750 IN X 0.6250 IN X 1.7500 IN
  (1)
• 2.0000 IN X 0.7500 IN X 2.0000 IN
  (1)
• 1.1875 IN X 1.8125 IN X 2.6250 IN
  (1)
• 1.8750 IN X 1.8125 IN X 2.6250 IN
  (1)
• 1.3100 IN X 1.8125 IN X 2.6250 IN
  (1)
• 8.0000 IN X 1.2500 IN X 0.7500 IN
  (1)
• 10.0000 IN X 1.2500 IN X 0.7500 IN
  (1)
• 12.0000 IN X 1.2500 IN X 0.7500 IN
  (1)
• 9.0000 IN X 1.0000 IN X 0.5000 IN
  (1)
• 9.2500 IN X 1.0000 IN X 0.7500 IN
  (1)
• 9.5600 IN X 1.0000 IN X 1.0000 IN
  (2)
• 10.0000 IN X 1.0000 IN X 1.2500 IN
  (1)
• 10.2500 IN X 1.0000 IN X 1.5000 IN
  (2)
• 10.7500 IN X 1.0000 IN X 2.0000 IN
  (2)
• 11.2500 IN X 1.0000 IN X 2.5000 IN
  (2)
• 11.9300 IN X 1.0000 IN X 3.0000 IN
  (2)
• 12.3700 IN X 1.0000 IN X 3.5000 IN
  (1)
• 12.8700 IN X 1.0000 IN X 4.0000 IN
  (1)
• 14.0000 IN X 1.5000 IN X 5.0000 IN
  (1)
• 14.7500 IN X 1.5000 IN X 9.4980 IN
  (1)
• 17.7500 IN X 1.5000 IN X 8.0000 IN
  (1)
• 19.4300 IN X 2.0000 IN X 10.0000 IN
  (1)
• 21.6800 IN X 2.0000 IN X 12.0000 IN
  (1)
• 23.5600 IN X 2.0000 IN X 14.0000 IN
  (1)
• 26.3700 IN X 2.5000 IN X 16.0000 IN
  (1)
• 28.8700 IN X 2.5000 IN X 18.0000 IN
  (1)
• 8.7500 IN X 1.0000 IN X 0.5000 IN
  (1)
• 9.0600 IN X 1.0000 IN X 0.7500 IN
  (1)
• 9.6200 IN X 1.0000 IN X 1.2500 IN
  (1)
• 12.5000 IN X 1.0000 IN X 4.0000 IN
  (1)
• X X 15.1250 IN
  (1)
• X X 0.0500 IN
  (7)
• X X 0.0650 IN
  (3)
• X X 0.0900 IN
  (1)
• X X 0.0450 IN
  (1)
• X X 0.1180 IN
  (1)
• 1.1800 IN X 0.8100 IN X 0.0480 IN
  (1)
• 1.3200 IN X 0.8100 IN X 0.0480 IN
  (1)
• 1.4380 IN X 0.8100 IN X 0.0620 IN
  (1)
• 1.8750 IN X 0.8100 IN X 0.0620 IN
  (1)
• 2.1250 IN X 0.8100 IN X 0.0620 IN
  (1)
• 6.2810 IN X 4.3130 IN X 1.2500 IN
  (1)
• 7.5000 IN X 5.8130 IN X 1.2500 IN
  (1)
• 144.0000 IN X 1.6000 IN X 1.6000 IN
  (1)
• 120.0000 IN X 2.3000 IN X 1.6000 IN
  (2)
• 144.0000 IN X 2.3000 IN X 1.6000 IN
  (2)
• 2.2500 IN X 1.5781 IN X 1.5781 IN
  (2)
• 1.6200 IN X 1.6200 IN X 2.3100 IN
  (1)
• 3.5000 IN X 1.6200 IN X 4.1250 IN
  (1)
• 1.2500 IN X 1.6200 IN X 4.1250 IN
  (1)
• 1.0300 IN X 1.0300 IN X 0.1040 IN
  (1)
• 3.0000 IN X 1.3700 IN X 7.0000 IN
  (1)
• 4.0000 IN X 4.5000 IN X 5.2500 IN
  (1)
• 2.5000 IN X 0.4200 IN X 4.2500 IN
  (1)
• 4.2500 IN X 0.4200 IN X 4.2500 IN
  (1)
• 0.7500 IN X 1.6245 IN X 1.6245 IN
  (4)
• 16.0000 IN X 7.1250 IN X 7.7800 IN
  (2)
• 18.0000 IN X 7.1250 IN X 7.7800 IN
  (1)
• 4.7540 IN X 0.9000 IN X 3.9580 IN
  (1)
• 8.0000 IN X 4.3750 IN X 9.6200 IN
  (1)
• 5.8100 IN X 1.8700 IN X 5.3700 IN
  (2)
• 14.0000 IN X 7.1250 IN X 14.0000 IN
  (1)
• 12.0000 IN X 7.1250 IN X 7.7800 IN
  (1)
• 0.7500 IN X 0.8325 IN X 0.8325 IN
  (2)
• 0.5000 IN X 0.5000 IN X 0.5000 IN
  (2)
• 3.2500 IN X 1.6250 IN X 0.5000 IN
  (1)
• 3.2500 IN X 1.6250 IN X 0.6200 IN
  (1)
• 3.2500 IN X 1.6250 IN X 0.7500 IN
  (1)
• 2.3800 IN X 1.6200 IN X 4.3100 IN
  (1)
• 0.7500 IN X 1.0200 IN X 1.0200 IN
  (1)
• 1.1000 IN X 1.1000 IN X 1.1000 IN
  (1)
• 0.8190 IN X 1.1480 IN X 2.6470 IN
  (1)
• 3.3510 IN X 1.2500 IN X 0.0677 IN
  (6)
• 2.3960 IN X 1.2500 IN X 0.0600 IN
  (5)
• X X 500.0000 IN
  (3)
• X X 2.6250 IN
  (3)
• X X 4.0000 IN
  (1)
• X X 2.1250 IN
  (2)
• X X 3.1250 IN
  (2)
• X X 6.0000 IN
  (2)
• X X 1.6250 IN
  (4)
• X X 4.1250 IN
  (1)
• 9.5625 IN X 6.0000 IN X 11.5313 IN
  (1)
• 8.0625 IN X 5.0000 IN X 9.7500 IN
  (1)
• 6.7500 IN X 4.0000 IN X 8.1250 IN
  (1)
• 0.5000 IN X 0.5000 IN X 0.4375 IN
  (1)
• 0.6800 IN X 0.6800 IN X 0.0940 IN
  (1)
• 0.7340 IN X 0.7340 IN X 0.0650 IN
  (1)
• 0.4870 IN X 0.4870 IN X 0.0620 IN
  (1)
• 0.8750 IN X 0.8750 IN X 0.0830 IN
  (1)
• 1.5000 IN X 0.3750 IN X 0.3750 IN
  (2)
• 1.0000 IN X 0.5000 IN X 0.5000 IN
  (1)
• 0.5620 IN X 0.5620 IN X 0.0640 IN
  (2)
• 2.0000 IN X 0.3750 IN X 0.3750 IN
  (2)
• 3.0000 IN X 0.3750 IN X 0.3750 IN
  (1)
• 3.0000 IN X 0.5000 IN X 0.5000 IN
  (1)
• 1.2500 IN X 0.6250 IN X 0.6250 IN
  (1)
• 2.5000 IN X 0.6250 IN X 0.6250 IN
  (1)
• 3.5000 IN X 0.6250 IN X 0.6250 IN
  (1)
• 3.7500 IN X 0.6250 IN X 0.6250 IN
  (1)
• 4.0000 IN X 0.6250 IN X 0.6250 IN
  (1)
• 1.0000 IN X 1.0000 IN X 0.0830 IN
  (1)
• 5.7030 IN X 1.2500 IN X 0.1015 IN
  (1)
• 1.7500 IN X 1.3100 IN X 0.8500 IN
  (2)
• 1.2680 IN X 0.6490 IN X 0.3750 IN
  (2)
• 1.5180 IN X 0.6490 IN X 0.3750 IN
  (1)
• 1.3640 IN X 0.8660 IN X 0.5000 IN
  (2)
• 1.6140 IN X 0.8660 IN X 0.5000 IN
  (2)
• 1.8640 IN X 0.8660 IN X 0.5000 IN
  (2)
• 1.2390 IN X 0.8660 IN X 0.5000 IN
  (1)
• 11.0000 IN X 2.3750 IN X 2.7500 IN
  (1)
• 11.0000 IN X 2.8750 IN X 3.0000 IN
  (1)
• 10.0000 IN X 3.6875 IN X 3.2500 IN
  (1)
• 11.0000 IN X 3.2500 IN X 3.0000 IN
  (1)
• 2.6080 IN X 1.2500 IN X 0.0740 IN
  (4)
• 2.9510 IN X 1.2500 IN X 0.0740 IN
  (4)
• 3.7800 IN X 1.2500 IN X 0.1040 IN
  (3)
• 4.3940 IN X 1.2500 IN X 0.1040 IN
  (4)
• 2.6080 IN X 1.2500 IN X 0.0677 IN
  (4)
• 2.9510 IN X 1.2500 IN X 0.0677 IN
  (3)
• 3.7800 IN X 1.2500 IN X 0.0966 IN
  (3)
• 4.3940 IN X 1.2500 IN X 0.0966 IN
  (4)
• 5.0390 IN X 1.2500 IN X 0.0966 IN
  (2)
• 5.8430 IN X 1.2500 IN X 0.0966 IN
  (4)
• 6.7030 IN X 1.2500 IN X 0.0966 IN
  (3)
• 2.2220 IN X 1.2500 IN X 0.0600 IN
  (1)
• 2.5010 IN X 1.2500 IN X 0.0600 IN
  (3)
• 2.7540 IN X 1.2500 IN X 0.0677 IN
  (2)
• 3.1890 IN X 1.2500 IN X 0.0677 IN
  (1)
• 3.5730 IN X 1.2500 IN X 0.0966 IN
  (2)
• 4.1640 IN X 1.2500 IN X 0.0966 IN
  (1)
• 5.8430 IN X 1.2500 IN X 0.1040 IN
  (3)
• 6.7030 IN X 1.2500 IN X 0.1040 IN
  (3)
• 1.1880 IN X 0.5060 IN X 0.2500 IN
  (2)
• 1.3750 IN X 1.3100 IN X 0.8500 IN
  (2)
• 1.3900 IN X 1.1100 IN X 1.3900 IN
  (1)
• 0.2500 IN X 1.7500 IN X 3.4380 IN
  (2)
• 2.3960 IN X 1.2500 IN X 0.0630 IN
  (2)
• 2.3960 IN X 1.2500 IN X 0.0590 IN
  (3)
• 2.6080 IN X 1.2500 IN X 0.0810 IN
  (2)
• 2.9510 IN X 1.2500 IN X 0.0810 IN
  (2)
• 3.3510 IN X 1.2500 IN X 0.0810 IN
  (1)
• 3.3510 IN X 1.2500 IN X 0.0740 IN
  (3)
• 3.7800 IN X 1.2500 IN X 0.1015 IN
  (2)
• 4.3940 IN X 1.2500 IN X 0.1015 IN
  (2)
• 5.0390 IN X 1.2500 IN X 0.1015 IN
  (1)
• 5.0390 IN X 1.2500 IN X 0.1040 IN
  (3)
• 5.8430 IN X 1.2500 IN X 0.1015 IN
  (2)
• 6.1410 IN X 1.2500 IN X 0.1015 IN
  (1)
• 6.1410 IN X 1.2500 IN X 0.0966 IN
  (2)
• 6.1410 IN X 1.2500 IN X 0.1040 IN
  (2)
• 6.7030 IN X 1.2500 IN X 0.1015 IN
  (1)
• 7.9690 IN X 1.2500 IN X 0.1280 IN
  (1)
• 7.9690 IN X 1.2500 IN X 0.0966 IN
  (1)
• 7.9690 IN X 1.2500 IN X 0.1040 IN
  (1)
• 9.8750 IN X 1.2500 IN X 0.1040 IN
  (2)
• 9.8750 IN X 1.2500 IN X 0.1280 IN
  (1)
• 9.8750 IN X 1.2500 IN X 0.0966 IN
  (1)
• 2.2220 IN X 1.2500 IN X 0.0590 IN
  (1)
• 2.5010 IN X 1.2500 IN X 0.0590 IN
  (1)
• 2.7540 IN X 1.2500 IN X 0.0810 IN
  (1)
• 2.7540 IN X 1.2500 IN X 0.0740 IN
  (1)
• 12.3750 IN X 1.2500 IN X 0.1040 IN
  (1)
• 2.7050 IN X 1.2500 IN X 0.0740 IN
  (1)
• 1.6170 IN X 1.2500 IN X 0.0590 IN
  (1)
• 1.7890 IN X 1.2500 IN X 0.0590 IN
  (1)
• 0.5000 IN X 1.2500 IN X 0.0590 IN
  (1)
• 2.2790 IN X 1.2500 IN X 0.0590 IN
  (1)
• 4.5550 IN X 1.2500 IN X 0.1040 IN
  (1)
• 5.3600 IN X 1.2500 IN X 0.1040 IN
  (1)
• 1.3100 IN X 0.7500 IN X 0.2500 IN
  (1)
• 0.7210 IN X 0.5250 IN X 0.4250 IN
  (1)
• 1.7680 IN X 0.6490 IN X 0.5620 IN
  (1)
• 15.2570 IN X 1.2500 IN X 0.1190 IN
  (1)
• 5.7030 IN X 1.2500 IN X 0.1040 IN
  (1)
• 3.0000 IN X 3.0000 IN X 0.3750 IN
  (1)
• 4.0000 IN X 4.0000 IN X 0.7500 IN
  (1)
• 18.0000 IN X 18.0000 IN X 0.3750 IN
  (1)
• 4.0000 IN X 4.0000 IN X 1.0000 IN
  (1)
• X X 12.0000 IN
  (1)
• 4.0000 IN X 36.0000 IN X 1.0000 IN
  (1)
• 6.0000 IN X 6.0000 IN X 1.0000 IN
  (1)
• 2.0000 IN X 2.0000 IN X 1.5000 IN
  (1)
• 18.0000 IN X 18.0000 IN X 1.0000 IN
  (1)
• 4.0000 IN X 4.0000 IN X 1.5000 IN
  (1)
• 6.0000 IN X 6.0000 IN X 0.3750 IN
  (1)
• 3.0000 IN X 36.0000 IN X 1.0000 IN
  (1)
• 2.0000 IN X 2.0000 IN X 0.3750 IN
  (1)
• 18.0000 IN X 18.0000 IN X 0.7500 IN
  (1)
• 8.0000 IN X 8.0000 IN X 1.5000 IN
  (1)
• 3.0000 IN X 3.0000 IN X 1.0000 IN
  (1)
• 2.0000 IN X 2.0000 IN X 1.0000 IN
  (1)
• 3.0000 IN X 3.0000 IN X 1.5000 IN
  (1)
• 5.0000 IN X 5.0000 IN X 1.0000 IN
  (1)
• 6.0000 IN X 6.0000 IN X 1.5000 IN
  (1)
• 4.0000 IN X 4.0000 IN X 0.3750 IN
  (1)
• 1.0000 IN X 1.2500 IN X 2.1800 IN
  (1)
• 9.1560 IN X 1.5000 IN X 0.2500 IN
  (1)
• 9.3650 IN X 6.4000 IN X 1.1060 IN
  (1)
• X X 5.9375 IN
  (1)
• 24.0000 IN X 1.6200 IN X 18.6800 IN
  (1)
• 79.6250 IN X 1.7500 IN X 84.0000 IN
  (1)
• 0.3750 IN X 1.5000 IN X 8.0000 IN
  (1)
• 30.0000 IN X 1.6200 IN X 4.6200 IN
  (1)
• 36.0000 IN X 1.6200 IN X 4.6200 IN
  (1)
• 1.7500 IN X 0.7500 IN X 0.8500 IN
  (1)
• 0.0010 IN X 0.0010 IN X 1.5000 IN
  (1)
• 8.7500 IN X 4.0000 IN X 6.0000 IN
  (1)
• 10.3750 IN X 5.9375 IN X 10.3750 IN
  (1)
• 6.8750 IN X 2.1250 IN X 2.1250 IN
  (1)
• 2.7500 IN X 1.8750 IN X 1.7500 IN
  (1)
• 28.8750 IN X 28.8750 IN X 24.2500 IN
  (1)
• 8.8750 IN X 8.0000 IN X 14.4688 IN
  (1)
• 7.2500 IN X 24.6250 IN X 7.2500 IN
  (1)
• 0.3750 IN X 2.8750 IN X 0.5000 IN
  (1)

Enclosure

• Zinc
  (12)
• Cast Aluminum
  (2)
• Plastic
  (5)
• Aluminum
  (12)
• Plated Steel
  (1)
• Porcelain, Steel
  (1)
• NEMA 4
  (5)
• NEMA FB1
  (10)
• NEMA 3R
  (3)
• NEMA 4X
  (2)
• NEMA 4X, IP68
  (4)
• NEMA 2, 3, 3R, 4, 4X, 5, 12, 13
  (9)

EU RoHS Indicator

• Contact Manufacturer
  (16)

FEATURES - Bullets

• Malleable iron and steel construction for added strength;Available in 3/8 in. to 1 in. trade sizes;Dual saddle clamp ensures proper conduit and cable connection for raceway;Zinc plated for corrosion resistant installation;Tri-head screw/clamp design - connectors can be installed by using a slotted, Phillips or Robertson head screwdriver;Insulated throats on all DOUBLE BITE connectors provide maximum wire protection;Additional sizes available
  (4)
• All steel construction ensures mechanical protection for raceways;Available in 3/8 in. to 4 in. trade sizes;Dual saddle clamp ensures proper conduit and cable connection for raceway;Zinc plated for corrosion resistant installation;Tri-head screw/clamp design - connectors can be installed by using a slotted, Phillips or Robertson head screwdriver;Insulated throats on all DOUBLE BITE connectors provide maximum wire protection;Additional sizes available
  (11)
• Rugged metallic construction insures mechanical protection;Couplings are pre-assembled with tri-head screws
  (2)
• RACO three-piece couplings provide concrete-tight connections;All components are zinc electro plated for corrosion protection;Reduces installation time;Eliminates field threading;Lighter than the traditional malleable iron 3-piece coupling;Compact size makes installation easier where space is limited;No need to disassemble the compression nut and ring
  (3)
• RACO three-piece couplings provide concrete-tight connections;All components are zinc electro plated for corrosion protection;Eliminates field threading;Lighter than the traditional malleable iron 3-piece coupling;Compact size makes installation easier where space is limited;No need to disassemble the compression nut and ring
  (1)
• All steel construction ensures mechanical protection for raceways;Available in 3/8 in. to 4 in. trade sizes;Dual saddle clamp ensures proper conduit and cable connection for raceway;Zinc plated for corrosion resistant installation;Tri-head screw/clamp design - connectors can be installed by using a slotted, Phillips or Robertson head screwdriver;UnInsulated;Additional sizes available
  (1)

Finish

• Silver
  (73)
• Zinc
  (4)
• Plastic
  (21)
• Cast Aluminum
  (3)
• Gray
  (29)
• Black
  (13)
• Grey
  (2)
• White
  (5)
• Plated Steel
  (1)
• Aluminum
  (41)
• Zinc Electroplated
  (176)
• No Finish
  (49)
• Ball burnish
  (42)
• Zinc Plated
  (924)
• Natural
  (51)
• Galvanized
  (4)
• Enamel
  (11)
• Hot Dip Galvanized
  (51)
• Powder Coated Epoxy
  (7)
• Epoxy Power Coat
  (1)
• Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat)
  (114)
• Epoxy Powder Coat
  (42)
• Zinc Electroplate
  (32)
• Natural Stainless Steel
  (6)
• Natural Aluminum
  (2)
• Nickel Plated
  (4)
• Hot Dip Galvanized, Cover Screws: Zinc Electroplated
  (1)
• Zinc Electroplated Body And Compression Washer
  (3)
• Hot Dip Or Mechanically Galvanized
  (7)
• PVC
  (413)
• Vibratory Finish
  (89)
• Chrome Plating
  (9)
• PVC Coated
  (81)
• Electro Zinc Plated
  (5)
• Electrogalvanized
  (12)
• Plain
  (29)
• DURA-COPPER
  (74)
• PLAIN (NO FINISH)
  (257)
• ZINC PHOSPHATE
  (205)
• DURA GREEN
  (150)
• FIBERGLASS
  (64)
• PVC BLACK OVER PLAIN
  (1)
• PRE-GALVANIZED
  (151)
• N/A
  (38)
• HOT-DIPPED GALVANIZED
  (74)
• YELLOW ZINC PLATED
  (113)
• Dura-Green
  (1)
• PLASTIC COATED OVER PLAIN
  (1)
• STAINLESS STEEL TYPE 316
  (42)
• STAINLESS STEEL TYPE 304
  (123)
• MALEABLE HDG
  (11)
• PORCELAIN
  (2)
• ENAMEL BLACK
  (4)
• YELLOW
  (3)
• GREEN
  (1)
• BLUE
  (4)
• NYLON
  (2)
• Yellow Zinc Chromate
  (1)
• PAINTED, MISC. COLORS
  (1)
• Polished
  (346)

Fitting Type

• Conduit Body Covers
  (7)
• Set Screw Type
  (4)
• Connectors
  (16)

Flexibility

• Rigid And IMC
  (36)

FV_BuyAmericanCompliant

• Contact Manufacturer
  (2)

FV_Certified Listed

• UL Listed;CSA Certified
  (2)
• UL Listed
  (4)

FV_Fitting Type

• Connectors
  (15)

FV_Product Family

• Flexible Metal
  (15)
• Rigid/IMC
  (4)

Height

• 2-13/16 IN
  (1)
• 3-1/4 IN
  (1)
• 3-9/16 IN
  (1)
• 6-15/16 IN
  (1)
• 6-9/16 IN
  (1)
• 8-1/16 IN
  (1)
• 8-5/16 IN
  (1)
• 1.66 IN
  (7)
• 7.5 IN
  (1)
• 4.38 IN
  (5)
• 4.22 IN
  (5)
• 3.75 IN
  (6)
• 2.94 IN
  (5)
• 2.22 IN
  (6)
• 4.31 IN
  (5)
• 2 IN
  (1)
• 8.5 IN
  (1)
• 2.66 IN
  (6)
• 3.19 IN
  (6)
• 6.25 IN
  (1)
• 5 IN
  (3)
• 4.44 IN
  (4)
• 4.94 IN
  (3)
• 1.84 IN
  (6)
• 2.97 IN
  (1)

Hub Size

• 1 IN
  (1)
• 1-1/4 IN
  (1)
• 1-1/2 IN
  (1)
• 2 IN
  (1)
• 2-1/2 IN
  (1)
• 3 IN
  (1)
• 4 IN
  (1)

Inside Diameter

• 0.63 IN
  (1)
• 0.88 IN
  (1)
• 0.95 IN
  (1)
• 1.32 IN
  (1)
• 1.64 IN
  (1)
• 2.12 IN
  (1)
• 2.58 IN
  (1)
• 3.12 IN
  (1)
• 3.62 IN
  (1)
• 4.1 IN
  (1)
• 5.11 IN
  (1)
• 6.12 IN
  (1)
• 8.12 IN
  (1)

Insulated

• Yes
  (187)

Insulation

• Insulated Throat
  (9)
• Yes
  (2)

Insulation Class

• 150 DEG C
  (9)
• Insulated throat rated up to 105 degree C
  (9)
• Insulated Throat
  (3)

Insulation Type

• Insulated
  (15)
• UnInsulated
  (1)

Length

• 0.57 IN
  (2)
• 0.63 IN
  (2)
• 0.76 IN
  (2)
• 0.94 IN
  (2)
• 1.13 IN
  (2)
• 1.32 IN
  (2)
• 1.51 IN
  (2)
• 1.57 IN
  (2)
• 1.63 IN
  (3)
• 1.69 IN
  (2)
• 1-3/4 IN
  (1)
• 1-7/8 IN
  (2)
• 2-1/4 IN
  (2)
• 2-3/4 IN
  (2)
• 3-1/4 IN
  (2)
• 3-3/4 IN
  (2)
• 4-5/8 IN
  (2)
• 6-1/2 IN
  (1)
• 2-3/32 IN
  (1)
• 2-3/8 IN
  (1)
• 2-13/16 IN
  (1)
• 3-5/16 IN
  (1)
• 2-11/16 IN
  (1)
• 3-1/8 IN
  (1)
• 3-9/16 IN
  (1)
• 5-3/4 IN
  (1)
• 6-5/8 IN
  (1)
• 8 IN
  (3)
• 1 IN
  (3)
• 1.2 IN
  (1)
• 1.24 IN
  (1)
• 1.36 IN
  (1)
• 1.55 IN
  (1)
• 1.89 IN
  (1)
• 1.93 IN
  (1)
• 2.11 IN
  (1)
• 2.18 IN
  (1)
• 2.39 IN
  (2)
• 2.57 IN
  (1)
• 1.33 IN
  (2)
• 1.44 IN
  (1)
• 1.74 IN
  (1)
• 1.83 IN
  (1)
• 2.03 IN
  (1)
• 2.14 IN
  (1)
• 2.83 IN
  (1)
• 3.05 IN
  (1)
• 3.21 IN
  (1)
• 3.33 IN
  (1)
• 3.58 IN
  (1)
• 4.34 IN
  (1)
• 1.41 IN
  (1)
• 1.5 IN
  (1)
• 1.75 IN
  (1)
• 1.97 IN
  (1)
• 2.15 IN
  (1)
• 2.16 IN
  (1)
• 2.99 IN
  (1)
• 3.12 IN
  (1)
• 3.1 IN
  (1)
• 3.83 IN
  (1)
• 4.43 IN
  (1)
• 1.02 IN
  (1)
• 1.18 IN
  (1)
• 1.9 IN
  (2)
• 1.37 IN
  (1)
• 2.01 IN
  (1)
• 1.6 IN
  (1)
• 2.24 IN
  (1)
• 2.25 IN
  (1)
• 2.6 IN
  (2)
• 0.85 IN
  (1)
• 1.06 IN
  (1)
• 1.68 IN
  (1)
• 1.92 IN
  (1)
• 2.89 IN
  (1)
• 3.52 IN
  (1)
• 4.52 IN
  (1)
• 5.59 IN
  (1)
• 6.69 IN
  (1)
• 4.02 IN
  (1)
• 8.64 IN
  (1)
• 9.63
  (2)
• 9.5
  (2)
• 8.63
  (2)
• 3.38
  (2)
• 7.75
  (2)
• 9
  (2)
• 3.94
  (2)
• 5.69
  (2)
• 4.75
  (4)
• 6.56
  (4)
• 24 IN
  (4)
• 6 IN
  (1)
• 7.1 IN
  (1)
• 9.38
  (1)
• 3.69
  (1)
• 9.25
  (1)
• 6.96 IN
  (1)
• 3
  (1)
• 2.81
  (2)
• 8.13
  (4)
• 5.63
  (2)
• 7.19
  (2)
• 4
  (2)
• 3.25
  (2)
• 7.44
  (2)
• 7.81
  (1)

Material

• Zinc
  (132)
• Steel
  (1364)
• Steel/Malleable Iron
  (4)
• Die Cast Zinc
  (57)
• Plastic
  (61)
• Aluminum
  (480)
• Porcelain, Steel
  (6)
• L(14.414) x W(5.350) x H(1.280)
  (1)
• Plated Steel
  (2)
• Galvanized Steel
  (2)
• Cast Aluminum
  (16)
• Steel, Aluminum
  (4)
• Non-metallic
  (174)
• UV-Rated Plastic
  (2)
• Zinc die-cast
  (2)
• Zinc Die Cast
  (607)
• Malleable Iron
  (612)
• Neoprene
  (6)
• Zinc Plated Steel
  (49)
• High Strength Zinc Alloy
  (3)
• Zinc Die Cast, Tin Plated Aluminum
  (11)
• Steel or 6/6 Nylon as noted
  (12)
• PVC (1900) and Aluminum (ME14)
  (1)
• Malleable Iron, Hot Dipped Galvanized
  (6)
• Porcelain
  (8)
• Porcelain wire holder, adjustable galvanized steel clamp
  (1)
• 26 Gauge Galvanized Steel Base, Elastomeric Compound Collar
  (1)
• 27 Gauge Galvanized Steel Base, Elastomeric Compound Collar
  (1)
• Elastomeric Base and Collar
  (2)
• Aluminum Wedge & Shell,6-1/2" Stainless Steel Bail
  (2)
• Fiberglass Reinforced Nylon
  (2)
• Screw Machined Steel
  (2)
• Malleable Iron, Zinc Plated
  (10)
• Thermoplastic
  (6)
• High Density Polyethylene (HDPE)
  (8)
• PVC
  (343)
• Copper
  (1)
• Brass
  (11)
• Die Cast Aluminum
  (7)
• Almag 35 Aluminum
  (38)
• Grayloy-Iron
  (36)
• Turned Steel
  (1)
• Stainless Steel
  (34)
• Malleable Iron And Steel
  (13)
• Copperfree (4/10 Of 1 PCT Maximum) Aluminum
  (4)
• Iron
  (2)
• Body and Nut: Cooper-free Aluminum Die Cast, O-Ring: BUNA-N, Insulator: polypropylene, Ground Screw: Stainless Steel
  (5)
• Body and Nut: Cooper-free Aluminum Die Cast, O-Ring: BUNA-N, Insulator: polypropylene
  (4)
• Malleable Iron Body, Seal Cover And Filler Plug, Stainless Steel Drain/Breather
  (3)
• Gray Iron, Cover Screws: Steel
  (1)
• Malleable Iron Body, PVC Grommet, Steel Compression Washer
  (3)
• Malleable Or Ductile Iron
  (31)
• Malleable Or Ductile Iron, Phenolic Insulator
  (7)
• Castings: Malleable Or Ductile Iron With Alkyd Enamel Coating, Grommet: Neoprene, Pressure Rings: Steel, PVC Coated
  (1)
• Body Of Fitting: Malleable Or Ductile Iron
  (1)
• Copper-Free Aluminum
  (12)
• Nylon
  (49)
• Polished Stainless Steel
  (3)
• Cast Iron
  (72)
• PVC coated steel strap
  (2)
• Polypropylene
  (10)
• Spring Steel
  (4)
• Zinc alloy
  (126)
• Zinc Alloy - Insulated
  (5)
• Aluminum Die Cast
  (1)
• PPO
  (4)
• Copper Free Aluminum
  (10)
• Die Cast Copper Free Aluminum
  (10)
• Cold Formed Steel
  (12)
• 12 Gauge Low Carbon Steel
  (59)
• Hot Rolled, Pickled and Oiled Plate or Strip Steel
  (428)
• Cold Rolled High Carbon Steel
  (124)
• Injection Molded Glass Reinforced Polyurethane
  (17)
• Glass Reinforced Polyurethane
  (26)
• Glass Reinforced PPO
  (15)
• Glass Reinforced Vinyl Ester
  (2)
• Low Carbon Steel
  (186)
• 16 Gauge Low Carbon Steel
  (41)
• 14 Gauge Low Carbon Steel
  (54)
• Rubber
  (1)
• Soft White PVC
  (14)
• Polyurethane
  (4)
• Fiberglass
  (1)
• Cast Iron Roller, Steel Base
  (1)
• Steel, Cast Iron (Roller)
  (2)
• Forged Steel
  (8)
• 13 Gauge Low Carbon Steel
  (1)
• Hot Rolled, Pickled and Oiled Strip or Sheet Steel
  (10)
• 16 Gauge Steel
  (4)
• 11 Gauge Low Carbon Steel
  (49)
• 11 Gauge Hot Rolled, Pickled and Oiled Plate or Strip Steel
  (9)
• 12 Gauge Hot Rolled, Pickled and Oiled Plate or Strip Steel
  (4)
• 12 Gauge Steel
  (4)
• Cast Malleable Steel
  (6)
• Phenolic
  (1)
• Plastic Cover
  (1)
• 304 Stainless Steel
  (119)
• Low Carbon Steel Clamp
  (34)
• 316 Stainless Steel
  (42)
• Oil-Resistant Neoprene
  (18)
• Natural Rubber
  (2)
• 45 Durometer Neoprene
  (2)
• CF8M/316 SS (Stainless Steel)
  (57)
• 316 SS (Stainless Steel)
  (196)
• 316 SS STAINLESS STEEL
  (84)
• 304 SS STAINLESS STEEL
  (9)

Minimum Pack Quantity

• 10
  (2)
• 1
  (5)
• 25
  (4)
• 5
  (4)
• 2
  (1)

Mounting

• Push In
  (11)
• 0.84 IN Hole
  (1)
• 1.05 IN Hole
  (1)
• 1.31 IN Hole
  (1)
• 1.66 IN Hole
  (1)
• 2.37 IN Hole
  (1)
• Horizontal or Vertical
  (2)
• 3-tapped mounting pads allow for lug mounting options for tight spaces.
  (2)
• Screw
  (5)
• Top And/Or Bottom Of Enclosure Housing
  (3)
• Top Of Enclosure Housing
  (1)
• Bottom Of Enclosure Housing
  (1)
• Flanged
  (11)
• Push In Mount
  (1)
• Snap In Mount
  (28)
• Thread Mount
  (26)
• Clamp On Mount
  (10)
• Floor/Wall
  (6)
• 0.33
  (2)
• Channel
  (448)
• Beam
  (7)
• Strut
  (7)
• Ceiling, Wall, Beam, Joist
  (3)
• Beam, Rod
  (10)
• Channel, Stud
  (1)
• 1-1/2 In Lathers Channel
  (5)
• Ceiling Grid
  (2)
• Slopped Ceiling
  (3)

Number Of Conductors

• 1 Cable
  (2)

Number Of Poles

• 3
  (5)
• 2
  (6)

Number Of Wires

• 4
  (4)
• 3
  (4)

Outside Diameter

• 1 IN
  (2)
• 1-1/4 IN
  (4)
• 1-1/2 IN
  (2)
• 2.13 IN
  (2)
• 2.38 IN
  (2)
• 2.88 IN
  (2)
• 3.56 IN
  (2)
• 4.31 IN
  (2)
• 4.56 IN
  (1)
• 5.13 IN
  (2)
• 6.31 IN
  (1)
• 7-1/2 IN
  (1)
• 1-1/8 IN
  (2)
• 1-3/4 IN
  (2)
• 2-1/8 IN
  (2)
• 2-1/2 IN
  (1)
• 3 IN
  (2)
• 3-5/8 IN
  (1)
• 4-1/2 IN
  (2)
• 5-1/8 IN
  (1)
• 5-1/4 IN
  (1)
• 6-3/8 IN
  (1)
• 0.84
  (7)
• 1.05
  (7)
• 1.315
  (7)
• 1.66
  (8)
• 2.375
  (9)
• 2.875
  (8)
• 3.5
  (8)
• 4
  (7)
• 4.5
  (7)
• 1.9
  (4)
• 1.99
  (2)
• 8.625
  (5)
• 6.27
  (4)
• 5.77
  (4)
• 4.39
  (4)
• 1.58
  (4)
• 3.89
  (4)
• 5.14
  (4)
• 1.89
  (6)
• 2.83
  (4)
• 1.96
  (4)
• 3.14
  (4)
• 9.39
  (1)
• 8.27
  (2)

Pallet Quantity

• 7680
  (1)
• 480
  (2)
• 22000
  (1)
• 12375
  (1)
• 5000
  (1)
• 5760
  (1)
• 24000
  (1)
• 14400
  (1)
• 4200
  (1)
• 2880
  (1)
• 2400
  (1)
• 1000
  (2)
• 800
  (1)
• 14000
  (1)
• 10000
  (1)
• 700
  (1)
• 567
  (1)
• 336
  (2)
• 17150
  (1)

Product Name

• 3/4 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 4 in. Flex Double Bite Saddle Connector
  (1)
• 3/8 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 1/2 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 1 in. 90 Degree Flex Double Bite Saddle Connector
  (1)
• 3/4 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 3/8 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector, Insulated
  (2)
• 1/2 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1 in. Flex/MCI/MCI-A/AC Double Bite Saddle Connector
  (1)
• 1-1/4 in. Flex Double Bite Saddle Connector
  (1)
• 1-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 2 in. Flex Double Bite Saddle Connector
  (1)
• 2-1/2 in. Flex Double Bite Saddle Connector
  (1)
• 3 in. Flex Double Bite Saddle Connector
  (1)
• 1/2 in. EMT - Flex
  (1)
• 3/4 in. EMT - Flex
  (1)
• 2-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 3-1/2 in. Rigid/IMC 3-Piece Super Coupling
  (1)
• 4 in. Rigid/IMC 3-Piece Coupling
  (1)

Product Type

• Commercial Fittings
  (20)

Radius

• round
  (22)
• straight
  (63)
• 90 deg
  (2)

Replacement Parts Material

• Nylon (Face Module);Zinc Plated Steel (Flanged Casing);Brass (Inlet Blade);Copper (Terminal Block);Bronze (grounding Shunt)
  (8)
• Rubber (Seal)
  (3)

Size

• 2.063 in x 1.75 in x 1 in
  (1)
• 2.25 in x 2.125 in x 1.25 in
  (1)
• 1.688 in x 1.25 in x 1.266 in
  (2)
• 1.6 in x 0.9 in x 1.1 in
  (1)
• 2 in x 1.2 in x 1.3 in
  (1)
• 3.1 in x 3.45 in x 3.45 in
  (1)
• 3.33 in x 4.1 in x 4.1 in
  (1)
• 3.5 in x 4.588 in x 4.588 in
  (1)
• 3.56 in x 5.1 in x 5.1 in
  (1)
• L(2.860) x W(0.960) x H(1.000) IN
  (1)
• L(1.410) x W(0.850) x H(0.850) IN
  (5)
• L(3.125) x W(3.024) x H(1.150) IN
  (1)
• L(4.020) x W(4.842) x H(3.055) IN
  (1)
• L(5.236) x W(6.506) x H(4.555) IN
  (1)
• L(2.520) x W(0.810) x H(1.000) IN
  (1)
• L(2.600) x W(2.680) x H(2.000) IN
  (1)
• L(2.720) x W(3.120) x H(2.175) IN
  (1)
• L(3.110) x W(3.620) x H(2.560) IN
  (1)
• L(3.370) x W(4.250) x H(2.936) IN
  (1)
• L(4.340) x W(4.850) x H(3.352) IN
  (1)
• L(6.000) x W(6.620) x H(4.550) IN
  (1)
• L(7.800) x W(9.740) x H(6.215) IN
  (1)
• L(8.000) x W(10.500) x H(8.000) IN
  (1)
• L(9.250) x W(12.500) x H(8.000) IN
  (2)
• L(1.284) x W(0.850) x H(0.850) IN
  (1)
• L(7.625) x W(5.599) x H(1.875) IN
  (1)
• L(11.000) x W(1.750) x H(0.525) IN
  (1)
• L(4.875) x W(2.300) x H(2.300) IN
  (1)
• L(3.450) x W(2.300) x H(2.300) IN
  (1)
• L(14.414) x W(5.350) x H(1.280) IN
  (1)
• L(5.437) x W(1.781) x H(1.781) IN
  (1)
• L(3.400) x W(1.781) x H(1.781) IN
  (1)
• L(7.286) x W(5.350) x H(0.627) IN
  (1)
• L(7.069) x W(2.269) x H(1.255) IN
  (1)
• L(2.062) x W(2.985) x H(2.262) IN
  (1)
• L(3.156) x W(4.500) x H(3.572) IN
  (1)
• L(2.750) x W(2.950) x H(0.875) IN
  (1)
• L(6.214) x W(3.683) x H(2.475) IN
  (1)
• L(6.672) x W(5.040) x H(2.203) IN
  (1)
• L(12.500) x W(4.409) x H(1.700) IN
  (1)
• L(0.900) x W(0.900) x H(0.670) IN
  (1)
• L(1.220) x W(1.220) x H(0.710) IN
  (1)
• L(1.450) x W(1.450) x H(0.880) IN
  (1)
• L(1.735) x W(1.735) x H(1.015) IN
  (1)
• L(2.050) x W(2.050) x H(1.015) IN
  (1)
• L(2.312) x W(2.312) x H(1.250) IN
  (1)
• L(3.460) x W(1.222) x H(1.878) IN
  (1)
• L(1.010) x W(1.010) x H(0.492) IN
  (2)
• L(1.772) x W(1.605) x H(0.840) IN
  (3)
• L(1.290) x W(1.290) x H(0.579) IN
  (1)
• L(8.500) x W(2.125) x H(3.625) IN
  (1)
• L(8.500) x W(4.125) x H(5.625) IN
  (1)
• L(8.500) x W(6.125) x H(7.625) IN
  (1)
• L(2.421) x W(2.593) x H(0.812) IN
  (1)
• L(2.500) x W(3.000) x H(1.250) IN
  (1)
• L(2.625) x W(3.812) x H(1.650) IN
  (1)
• L(3.750) x W(3.562) x H(1.750) IN
  (1)
• L(4.125) x W(4.093) x H(2.312) IN
  (1)
• L(12.750) x W(4.982) x H(1.720) IN
  (1)
• L(2.154) x W(1.605) x H(0.950) IN
  (1)
• L(6.187) x W(6.000) x H(2.500) IN
  (1)
• L(2.012) x W(2.012) x H(2.085) IN
  (1)
• L(1.057) x W(1.057) x H(0.812) IN
  (1)
• L(1.029) x W(1.029) x H(1.289) IN
  (1)
• L(1.271) x W(1.271) x H(1.289) IN
  (1)
• L(0.965) x W(0.965) x H(1.031) IN
  (1)
• L(1.125) x W(1.125) x H(1.340) IN
  (1)
• L(1.200) x W(1.200) x H(1.510) IN
  (1)
• L(1.500) x W(1.500) x H(1.637) IN
  (1)
• L(1.300) x W(1.300) x H(1.236) IN
  (1)
• L(5.027) x W(5.027) x H(2.340) IN
  (1)
• L(6.758) x W(6.758) x H(2.816) IN
  (1)
• L(7.567) x W(7.567) x H(2.890) IN
  (1)
• L(1.515) x W(1.515) x H(1.287) IN
  (1)
• L(6.000) x W(4.250) x H(2.000) IN
  (1)
• L(1.800) x W(1.800) x H(1.352) IN
  (1)
• L(2.280) x W(2.280) x H(1.462) IN
  (1)
• L(2.453) x W(2.453) x H(1.580) IN
  (1)
• L(2.881) x W(2.881) x H(1.584) IN
  (1)
• L(3.320) x W(3.320) x H(1.900) IN
  (1)
• L(4.040) x W(4.040) x H(2.032) IN
  (1)
• L(4.560) x W(4.560) x H(2.242) IN
  (1)
• L(8.500) x W(1.625) x H(3.125) IN
  (1)
• L(8.500) x W(3.125) x H(4.625) IN
  (1)
• L(8.500) x W(5.125) x H(6.625) IN
  (1)
• L(3.537) x W(2.050) x H(2.664) IN
  (1)
• L(4.890) x W(3.140) x H(4.090) IN
  (1)
• L(1.648) x W(1.648) x H(0.683) IN
  (1)
• L(1.092) x W(1.092) x H(0.954) IN
  (1)
• L(1.473) x W(1.179) x H(0.840) IN
  (1)
• L(2.388) x W(2.035) x H(0.950) IN
  (1)
• L(1.473) x W(1.244) x H(0.840) IN
  (2)
• L(2.467) x W(2.115) x H(0.950) IN
  (1)
• L(2.901) x W(2.750) x H(3.700) IN
  (1)
• L(2.156) x W(1.885) x H(2.575) IN
  (1)
• L(2.466) x W(2.105) x H(3.093) IN
  (1)
• L(3.218) x W(3.235) x H(4.250) IN
  (1)
• L(3.281) x W(3.890) x H(5.000) IN
  (1)
• L(2.210) x W(1.514) x H(0.840) IN
  (1)
• L(3.054) x W(2.717) x H(1.200) IN
  (1)
• L(2.496) x W(1.709) x H(1.300) IN
  (1)
• L(1.610) x W(1.450) x H(1.583) IN
  (1)
• L(2.084) x W(1.858) x H(1.995) IN
  (1)
• L(2.400) x W(2.100) x H(2.025) IN
  (1)
• L(2.917) x W(2.560) x H(2.150) IN
  (2)
• L(2.496) x W(1.819) x H(0.854) IN
  (2)
• L(2.496) x W(1.739) x H(0.854) IN
  (2)
• L(1.000) x W(1.000) x H(0.540) IN
  (1)
• L(2.036) x W(2.668) x H(1.727) IN
  (1)
• L(2.075) x W(1.252) x H(1.000) IN
  (1)
• L(2.500) x W(2.386) x H(0.950) IN
  (1)
• L(2.560) x W(1.716) x H(2.020) IN
  (1)
• L(2.615) x W(2.386) x H(1.200) IN
  (1)
• L(1.839) x W(1.060) x H(0.976) IN
  (1)
• L(0.972) x W(0.942) x H(0.919) IN
  (1)
• L(1.290) x W(1.290) x H(1.004) IN
  (1)
• L(1.387) x W(1.123) x H(1.123) IN
  (2)
• L(1.432) x W(1.123) x H(1.123) IN
  (2)
• L(3.055) x W(2.752) x H(1.135) IN
  (1)
• L(1.312) x W(1.312) x H(0.796) IN
  (1)
• L(1.592) x W(1.592) x H(0.900) IN
  (1)
• L(2.250) x W(2.250) x H(0.900) IN
  (1)
• L(2.581) x W(2.581) x H(0.900) IN
  (1)
• L(3.124) x W(3.124) x H(0.930) IN
  (1)
• L(2.750) x W(2.750) x H(1.995) IN
  (1)
• L(7.750) x W(7.750) x H(1.995) IN
  (1)
• L(2.190) x W(1.135) x H(1.409) IN
  (1)
• L(10.5) x W(10.5) x H(0.75) IN
  (1)
• L(2.046) x W(1.910) x H(1.188) IN
  (1)
• L(2.278) x W(2.226) x H(1.188) IN
  (1)
• L(2.557) x W(2.504) x H(1.188) IN
  (1)
• L(3.092) x W(3.095) x H(1.498) IN
  (1)
• L(3.822) x W(3.890) x H(1.498) IN
  (2)
• L(4.836) x W(4.427) x H(1.762) IN
  (2)
• L(5.057) x W(5.057) x H(1.763) IN
  (2)
• L(5.961) x W(5.561) x H(1.763) IN
  (2)
• L(6.461) x W(6.063) x H(1.762) IN
  (2)
• L(1.330) x W(1.605) x H(2.623) IN
  (1)
• L(1.330) x W(1.456) x H(2.413) IN
  (1)
• L(0.890) x W(1.422) x H(0.890) IN
  (1)
• L(1.250) x W(1.125) x H(1.125) IN
  (1)
• 1/2 in
  (231)
• 3/4 in
  (251)
• 1 in
  (228)
• 2 in
  (209)
• 2 1/2 in
  (10)
• 3 in
  (143)
• 3 1/2 in
  (9)
• 1 1/4 in
  (13)
• 1 1/2 in
  (13)
• 3-2 Cable
  (1)
• 4 in
  (125)
• 3-#2 in
  (1)
• 3-#3/0, #4/0 in
  (1)
• 2 Inch Conduit, 1-1/4 Inch Cap in
  (1)
• 2-1/2 Inch Conduit, 2 Inch Cap in
  (1)
• 1-1/4 in
  (154)
• 1-1/2 in
  (165)
• 1 1/4 - 1 1/2 in
  (1)
• 2 1/2 - 3 in
  (1)
• 3 1/2 - 4 in
  (1)
• 5 in
  (46)
• 2-1/2 in
  (117)
• 3-1/2 in
  (68)
• 1 1/4-1 1/2 in
  (1)
• 3/8 in
  (52)
• 6 in
  (49)
• 2-#8,6,4,2 in
  (1)
• 3/8" in
  (1)
• 0.75 in
  (8)
• 0.5 IN
  (7)
• #8 Solid - #1 Stranded
  (1)
• #1/0 - #4/0 Stranded
  (1)
• #4 - 0 (CABLE RANGE)
  (1)
• 1/4 X 1-11/16 IN
  (1)
• 5/16 X 2 IN
  (1)
• 3/8 X 2-1/4 IN
  (1)
• 1-1/4 - 3 IN
  (1)
• 3/8-1/2 IN
  (1)
• 3/4-1 IN
  (1)
• 1/2 EMT, 3/4 EMT IN
  (1)
• 1 IN EMT, 3/3 AWG SEU
  (1)
• 1-1/4 IN EMT, 2/3 AWG SEU
  (1)
• 1-1/2 EMT IN
  (1)
• 2 EMT IN
  (1)
• 3 x 3-1 AWG
  (1)
• 3 x 2/0-4/0 AWG
  (1)
• 4-3/4 IN
  (2)
• 2-3/4 IN
  (3)
• 3 x 2 IN
  (3)
• 3 x 2-1/2 IN
  (3)
• 4 x 3 IN
  (3)
• 5 x 4 IN
  (1)
• 6 x 5 IN
  (1)
• 2 x 1-1/4 IN
  (4)
• 1/2 KO IN
  (1)
• 2 Stranded AWG
  (1)
• 4 Solid AWG
  (1)
• 4 Stranded AWG
  (1)
• 6 Solid AWG
  (1)
• 6 Stranded AWG
  (1)
• 8 Solid AWG
  (1)
• 8 Stranded AWG
  (1)
• 1.25 IN
  (6)
• 1.5 IN
  (6)
• 0.38 IN
  (3)
• 2 X 1.25 IN
  (1)
• 2.50 X 1 IN
  (1)
• 1.25 X 2.5 IN
  (1)
• 2.5 IN
  (4)
• 3.5 IN
  (3)
• 2/12 IN
  (1)
• 3-12 IN
  (1)
• 1-/2 IN
  (1)
• 1/2 to 3/4 IN
  (2)
• 3/4 X 1 IN
  (2)
• 1 to 1 1/4 IN
  (1)
• 1/2 X 1 IN
  (1)
• 1 X 1-1/2 IN
  (1)
• 1-1/4 X 2 IN
  (1)
• 1-1/2 X 2 IN
  (1)
• 2 X 2-1/2 IN
  (2)
• 3 X 4 IN
  (1)
• 4 X 5 IN
  (1)
• 5 X 6 IN
  (1)
• 2-1-/2 IN
  (1)
• M50
  (2)
• M16
  (1)
• M40
  (1)
• M20
  (1)
• 1/2
  (11)
• 3/4
  (13)
• Trade Size 3.00 IN
  (1)
• Trade Size 1.50 IN
  (1)
• 5/8 IN
  (25)
• 11/16 IN
  (4)
• 13/16 IN
  (1)
• Trade Size 0.75 IN
  (1)
• Trade Size 1.00 IN
  (1)
• 1 IN Inside Diameter X 1.315 Outside Diameter (Steel Pipe Or Conduit), 1-1/4 IN Inside Diameter X 1-3/8 IN Outside Diameter (Copper Tubing)
  (1)
• Trade Size 2.00 IN
  (1)
• 3.50 Dia x 2.66 H IN
  (1)
• 23 Dia x 2.72 H IN
  (1)
• 3 Inch
  (7)
• 3-1/2 Inch
  (7)
• 3/4 Inch
  (96)
• 2
  (19)
• 1/2 Inch
  (125)
• 1 Inch
  (73)
• 1-1/4 inches
  (34)
• 1-1/2 Inches
  (35)
• 2 Inches
  (80)
• 2-1/2 Inches
  (43)
• 2-Jan
  (1)
• Screw Length 2-1/4 Inch
  (1)
• 5 Inch
  (2)
• 1-1/4 Inch
  (38)
• 1-1/2 Inch
  (36)
• 3
  (13)
• 4
  (11)
• 6
  (3)
• 3 Inches
  (37)
• 4 Inches
  (30)
• 1-1/4
  (11)
• 1-1/2
  (7)
• 2-1/2
  (10)
• 5
  (2)
• 5 Inches
  (2)
• 6 Inches
  (2)
• 3/4 x 1/2
  (2)
• 1 x 1/2
  (1)
• 1 x 3/4
  (2)
• 1-1/4 x 1
  (2)
• 1-1/2 x 1
  (1)
• 1-1/2 x 1-1/4
  (2)
• 2-1/2 x 2 Inches
  (2)
• 3 x 2
  (2)
• 3 x 2-1/2
  (1)
• 4 x 3
  (1)
• 1
  (5)
• 3-1/2 Inches
  (14)
• 3/8
  (3)
• 3/8 Inch (1/2 Inch Knockout)
  (6)
• 3/8 Inch
  (17)
• 2 Inch
  (10)
• 2-1/2 Inch
  (6)
• 4 Inch
  (7)
• 6 Inch
  (3)
• 1/2 Inch / 3/8 Inch
  (1)
• 1-1/4 x 3/4
  (1)
• 0.06
  (1)
• #2
  (1)
• #3
  (1)
• #105
  (1)
• #10-T
  (1)
• #12
  (3)
• 2 x 1-1/4
  (1)
• 2 x 1-1/2
  (2)
• 3 1/2
  (3)
• 3#3-2
  (1)
• 2.25 Inches x 2.12 Inches x 2.37 Inches
  (1)
• 3#3/0-4/0
  (1)
• 1 1/4 Inch
  (1)
• 3 #3 - 2 SEC
  (1)
• 1-1/4 - 1-1/2
  (1)
• 3-1/2
  (1)
• Hub Size 1/2 in
  (2)
• Hub Size 1 in
  (1)
• Hub Size 3/4 in
  (1)
• 4-1/2 IN
  (3)
• 1/2 x 3/8 IN
  (2)
• 3/4 x 1/2 IN
  (3)
• 1 x 1/2 IN
  (3)
• 1 x 3/4 IN
  (3)
• 1-1/4 x 1/2 IN
  (3)
• 1-1/4 x 3/4 IN
  (3)
• 1-1/4 x 1 IN
  (3)
• 1-1/2 x 1/2 IN
  (3)
• 1-1/2 x 3/4 in
  (3)
• 1-1/2 x 1 IN
  (3)
• 1-1/2 x 1-1/4 IN
  (3)
• 2 x 1/2 IN
  (3)
• 2 x 3/4 IN
  (3)
• 2 x 1 IN
  (3)
• 2 x 1-1/2 IN
  (3)
• 2-1/2 x 2 IN
  (2)
• 3-1/2 x 2 IN
  (1)
• 3-1/2 x 2-1/2 IN
  (1)
• 3-1/2 x 3 in
  (1)
• 4 x 2 IN
  (2)
• 4 x 2-1/2 IN
  (1)
• 4 x 3-1/2 IN
  (1)
• 4-11/32 x 1-5/8 x 4-15/16 IN
  (1)
• 3-1/16 x 1-5/8 IN
  (2)
• 3-3/4 x 1-5/8 x 3-7/8 IN
  (1)
• 3-3/4 x 1-5/8 x 1-5/8 IN
  (1)
• 5-1/2 x 1-5/8 x 1-5/8 IN
  (1)
• 3-7/8 x 1-5/8 x 1-7/8 IN
  (1)
• 3-1/3 x 1-5/8 x 1-3/16 IN
  (1)
• 1-7/8 x 1-5/8 x 2 IN
  (1)
• 5-1/2 x 1-5/8 x 1-3/16 IN
  (1)
• 3 x 2-5/16 x 1-5/8 IN
  (1)
• 4-1/8 x 4-1/8 x 1-5/8 IN
  (1)
• 3-1/4 In Width X 2-1/4 In Height
  (3)
• 3/8 In-16 TPI
  (30)
• 1/2 In-13 TPI
  (29)
• 5/8 In-11 TPI
  (15)
• 3/4 In-10 TPI
  (7)
• 7/8 In-9 TPI
  (6)
• 3/4 In (EMT), 1/2 In (IMC/Rigid)
  (18)
• 1/2 In (EMT)
  (12)
• 1/2 In, 3/4 In
  (6)
• 7 In Length X 2-1/16 In Width X 4 In Height
  (2)
• 3-1/2 In Length
  (13)
• 5-3/8 In Length
  (7)
• 7-1/4 In Length
  (14)
• 9-1/8 In Length
  (3)
• 3-1/2 In Width X 3-1/2 In Height
  (8)
• 3-1/2 In Width X 5-3/8 In Height
  (19)
• 5-3/8 In Width X 5-3/8 In Height
  (7)
• 5-3/8 In Width X 9-1/8 In Height
  (2)
• 13/32 In Diameter
  (1)
• 9/16 In Diameter
  (13)
• 6-5/8 In Length X 5 In Width X 3 In Height
  (1)
• 3/8 In-16 TPI X 1-1/4 In Length
  (4)
• 3/8 In-16 TPI X 1-1/2 In Length
  (4)
• 1/2 In-13 TPI X 1-1/4 In Length
  (3)
• 1/2 In-13 TPI X 1-1/2 In Length
  (2)
• 1-1/2 In (Pipe), 1-5/8 In (Tubing)
  (1)
• 5/16 In-18 TPI X 1-1/2 In Length
  (3)
• 3/16 To 1/2 In
  (1)
• 1/4 To 3/4 In
  (1)
• 8 In Length X 7-25/32 In Height
  (1)
• 2-5/8 In (OD), 2-1/2 In (Copper Tube)
  (1)
• 3-1/8 In (OD), 3 In (Copper Tube)
  (1)
• 3-5/8 In (OD), 3-1/2 In (Copper Tube)
  (1)
• 4-1/8 In (OD), 4 In (Copper Tube)
  (2)
• 1/2 In (Rigid)
  (1)
• 1 In (Rigid)
  (1)
• 3/8 In-16 TPI X 1 In Length
  (5)
• 3/8 In-16 TPI X 2-1/2 In Length
  (1)
• 1/2 In-13 TPI X 1 In Length
  (3)
• 1/4 In-20 TPI
  (26)
• 18 In Length X 4-5/8 In Height
  (2)
• 24 In Length X 4-5/8 In Height
  (1)
• 1 In Width X 36 Ft Length
  (1)
• #12 (Wire), 1/4 In (Plain/Threaded Rod)
  (1)
• 2-3/8 In Height
  (1)
• 2-3/4 In Height
  (1)
• 2-3/16 In Length X 2 In Width X 2-3/16 In Height
  (6)
• 3 In Length X 3 In Width X 3 In Height
  (2)
• 1-3/8 In Depth
  (1)
• 1-13/16 In Depth
  (1)
• 12 In Length X 15 In Height
  (1)
• 1 In (OD)
  (2)
• 1-1/4 In Height
  (14)
• 31/32 In
  (2)
• 3/8 In-16 TPI Rod, 2 In Width X 2-7/8 In Height X 1/4 In Thickness
  (2)
• 1/2 In-13 TPI Rod, 2 In Width X 2-7/8 In Height X 1/4 In Thickness
  (2)
• 5/8 In-11 TPI Rod, 2 In Width X 2-7/8 In Height X 1/4 In Thickness
  (2)
• 3/4 In-10 TPI Rod, 2-1/2 In Width X 3-1/8 In Height X 3/8 In Thickness
  (2)
• 7/8 In-9 TPI Rod, 2-1/2 In Width X 4-1/4 In Height X 3/8 In Thickness
  (2)
• 1 In-8 TPI Rod, 3 In Width X 4-1/2 In Height X 1/2 In Thickness
  (2)
• 1-1/4 In-7 TPI Rod, 4 In Width X 5 In Height X 5/8 In Thickness
  (1)
• 1-7/8 In (OD)
  (2)
• 2 In (OD)
  (2)
• 1/2 To 1-1/2 In
  (1)
• 1-1/2 To 2 In
  (1)
• 2-1/2 To 3 In
  (1)
• 5/8 In Stud Length
  (1)
• 1-1/2 In Stud Length
  (1)
• 1/16 To 1/4 In Thickness Flange
  (1)
• 1/16 To 1/4 In Thickness
  (1)
• 4-1/4 In Overall Height
  (2)
• 3/4 In (EMT)
  (1)
• 1 In (EMT)
  (1)
• 8 In
  (19)
• 10 In
  (14)
• 12 In
  (13)
• 1-1/4 In (OD)
  (2)
• 1-1/2 In (OD)
  (2)
• 1-3/4 In (OD)
  (1)
• 2-1/2 In (OD)
  (1)
• 3 In (OD)
  (1)
• 6-1/8 In (OD), 6 In (Copper Tube)
  (1)
• 1-5/8 In Width X 4 In Height
  (1)
• 5 In Length X 5 In Width X 3 In Height
  (3)
• 1/2 In, 3/4 In Conduit
  (14)
• 14 In
  (10)
• 16 In
  (8)
• 18 In
  (7)
• 20 In
  (5)
• 24 In
  (2)
• 1/2 To 2 In
  (2)
• 2-1/2 To 4 In
  (2)
• 8 To 10 In
  (2)
• 4 To 6 In
  (1)
• 2.029 IN X 0.606 IN X 1.207 IN
  (1)
• 3/8 In-16 TPI Rod, 1-3/8 In Width X 2-7/8 In Length X 7/16 In Height
  (2)
• 1/2 In-13 TPI Rod, 1-3/8 In Width X 2-7/8 In Length X 1/2 In Height
  (3)
• 1 In-8 TPI
  (1)
• 1-1/8 In-7 TPI
  (1)
• 3/4 In-10 TPI Rod
  (2)
• 3/8 In-16 TPI Rod
  (7)
• 1/2 In-13 TPI Rod
  (2)
• 5/8 In-11 TPI Rod
  (1)
• 7/8 In-9 TPI Rod
  (1)
• 4-1/4 To 7-1/4 In Height
  (1)
• 3/32 In Thickness Purlin
  (2)
• 1/2 In (EMT), 3/4 In (Rigid)
  (3)
• 3/8 In Conduit
  (6)
• 1 In Conduit
  (10)
• 1-1/4 In Conduit
  (6)
• 1-1/2 In Conduit
  (4)
• 2 In Conduit
  (5)
• #8 (Wire), 1/4 In Plain Rod
  (5)
• 1/4 In Threaded Rod
  (5)
• 1/4 In, 3/8 In Threaded Rod
  (3)
• 3/8 In Threaded Rod
  (4)
• 0.281 In, 0.406 In Diameter Hole
  (1)
• #12 X 100 Feet
  (1)
• #11
  (1)
• 3/8 In Diameter Hole
  (1)
• #8 Wire/1/4 In Plain Rod
  (1)
• 1/16 To 5/32 In Thickness Flange
  (2)
• 5/32 To 1/4 In Thickness Flange
  (1)
• 1/4 In-20 TPI Rod
  (1)
• 1/4 In-20 TPI/3/8 In-16 TPI Rod
  (1)
• 3/8 In-20 TPI
  (1)
• 1 In (EMT), 3/4 In (IMC/Rigid)
  (13)
• 1/2 To 1 In
  (1)
• 1/2 To 1/2 In
  (1)
• 3/4 To 1 In
  (1)
• 1 To 1 In
  (1)
• 1/2 In (EMT/Rigid)
  (2)
• 1 In (EMT/Rigid)
  (2)
• 1-1/4 In EMT
  (1)
• 1-1/2 In EMT, 1-1/4 In Rigid
  (1)
• 1-1/2 In Rigid
  (1)
• 2 In (EMT/Rigid)
  (1)
• 2-1/2 In (EMT/Rigid)
  (1)
• 3 In (EMT/Rigid)
  (1)
• 3-1/2 In (EMT/Rigid)
  (1)
• 4 In (EMT/Rigid)
  (1)
• M8 X 1.25 mm
  (4)
• 1/4 In Plain Rod
  (1)
• 5/16 To 1/2 In
  (1)
• 120 In Length
  (4)
• 240 In Length
  (2)
• #8-32 TPI
  (5)
• #10-24 TPI
  (4)
• 5/16 In-18 TPI
  (7)
• 7/16 In-14 TPI
  (3)
• #10-32 TPI
  (5)
• 1/4 In-20 TPI X 1 In Length
  (4)
• 1/4 In-20 TPI X 1-1/4 In Length
  (3)
• 3/8 In-16 TPI X 3/4 In Length
  (2)
• 1-1/2 In Height
  (1)
• 1/4 In-20 TPI X 1/2 In Length
  (1)
• 1/4 In-20 TPI X 3/4 In Length
  (2)
• 1/4 In-20 TPI X 1-1/2 In Length
  (2)
• 5/16 In-18 TPI X 1 In Length
  (2)
• 3/8 In-16 TPI X 2 In Length
  (2)
• 1/2 In-13 TPI X 2 In Length
  (1)
• 1/2 In-13 TPI X 2-1/2 In Length
  (1)
• 1/2 In-13 TPI X 7/8 In Length
  (1)
• 5/16 In-18 TPI X 1-1/4 In Length
  (1)
• 1/4 In Diameter X 3/4 In Length
  (1)
• 1/4 In Diameter X 1 In Length
  (3)
• 5/16 In Diameter X 1 In Length
  (1)
• 1/4 In
  (15)
• 5/16 In
  (4)
• 1/4 In ID X 1-1/4 In OD
  (1)
• 1/4 In ID X 1-1/2 In OD
  (1)
• 3/8 In ID X 1-1/4 In OD
  (1)
• 3/8 In ID X 1-1/2 In OD
  (1)
• 1/2 In ID X 2 In OD
  (1)
• 1-5/8 In Width X 2-5/16 In Height
  (5)
• 3-1/2 In Width X 2-1/4 In Height
  (4)
• 1-5/8 In Width X 4-1/8 In Height
  (6)
• 3-1/2 In Width X 4-1/8 In Height
  (13)
• 5-7/16 In Width X 1-5/8 In Height
  (4)
• 5-7/16 In Width X 3-1/4 In Height
  (4)
• 1-5/8 In Width X 1-7/8 In Height
  (1)
• 6 5/8 In Width X 3-3/4 In Height
  (1)
• 8 5/8 In Width X 3-3/4 In Height
  (1)
• 3-3/4 In Width X 3-15/16 In Height
  (6)
• 5-7/16 In Width X 1-3/8 In Height
  (1)
• 5-7/16 In Width X 2-7/16 In Height
  (1)
• 5-7/16 In Width X 1 In Height
  (1)
• 5-7/16 In Width X 13/16 In Height
  (2)
• 3-1/2 In Width X 2-1/16 In Height
  (4)
• 3-1/2 In Width X 3-15/16 In Height
  (1)
• 5-3/8 In Width X 3-15/16 In Height
  (2)
• 5-7/16 In Width X 2-1/16 In Height
  (4)
• 9-3/16 In Width X 3-15/16 In Height
  (5)
• 5-7/16 In Width X 3-15/16 In Height
  (4)
• 1-5/8 In Width X 3-1/2 In Depth X 2-5/16 In Height
  (1)
• 3-1/2 In Width X 3-1/2 In Depth X 4-3/16 In Height
  (1)
• 1-7/8 In X 3-1/2 In X 3-15/16 In
  (3)
• 7-5/8 In Width X 7-5/8 In Height
  (1)
• 6-1/2 In Length
  (2)
• 3-1/2 In Length X 1-5/8 In Width
  (1)
• 3-1/4 In X 2-3/8 In
  (2)
• 2-5/16 In X 3 In
  (4)
• 2-1/2 In X 3-1/2 In
  (4)
• 2-1/2 In X 3-3/16 In
  (1)
• 2-1/16 In X 3-5/16 In
  (3)
• 7-1/4 In Length X 1-11/16 In Width X 1-5/8 In Height
  (3)
• 7-1/4 In Length X 1-11/16 In Width X 13/16 In Height
  (1)
• 1-7/8 In Width
  (1)
• 12 In Length X 3-7/16 In Height
  (3)
• 16 In Length X 4-7/16 In Height
  (2)
• 18 In Length X 4-15/16 In Height
  (2)
• 6 In Length X 1-15/16 In Height
  (2)
• 8 In Length X 2-7/16 In Height
  (2)
• 10 In Length X 2-15/16 In Height
  (3)
• 9 In Length X 4 In Height
  (2)
• 12 In Length X 4 In Height
  (1)
• 15 In Length X 4 In Height
  (1)
• 24 In Length X 6 In Height
  (1)
• 3-3/4 In Length X 6-3/8 In Height
  (1)
• 5-3/8 In Height
  (4)
• 3-1/2 In Height
  (8)
• 3/8 In Diameter
  (7)
• 7/16 In Diameter
  (11)
• 1.015 In Depth
  (1)
• 0.827 In Depth
  (3)
• 1.640 In Depth
  (7)
• 1.390 In Depth
  (3)
• 7/8 In
  (2)
• 1-1/8 In
  (6)
• 3 In Length X 5-3/8 In Height
  (1)
• 1-21/32 In Width X 3-1/2 In Height
  (1)
• 1/2 To 8 In
  (1)
• 1/2 To 3 In
  (1)
• 1-1/2 To 6 In
  (1)
• 2.452 In Depth
  (1)
• 3.265 In Depth
  (1)
• 1-7/8 In Width X 2-1/16 In Height
  (6)
• 2-1/4 In Width X 2-1/4 In Height
  (4)
• 1-7/8 In Width X 3-15/16 In Height
  (4)
• 1-5/8 In Width X 3-1/2 In Depth X 4-3/16 In Height
  (2)
• 2-1/16 In X 3-1/2 In X 1-7/8 In
  (2)
• 4-7/8 In X 2 In
  (1)
• 3-1/2 In X 3-3/4 In X 2-1/16 In
  (1)
• 3-1/2 In X 3-11/16 In
  (9)
• 12 In Length
  (3)
• 16-5/8 In Length
  (2)
• 18 In Length
  (5)
• 7-1/32 In Width X 1-5/8 In Height
  (1)
• 3-1/2 In Width X 3-5/16 In Height
  (3)
• 5-3/8 In Width X 3-5/16 In Height
  (3)
• 3-13/16 In Width X 2-1/16 In Height
  (2)
• 5-11/16 In Width X 3-15/16 In Height
  (1)
• 5-21/32 In Width X 3-15/16 In Height
  (2)
• 4 In Height
  (3)
• 6 In Length X 6 In Width X 1-5/8 In Height
  (8)
• 6 In Length X 6 In Width X 3-1/2 In Height
  (21)
• 1-19/32 In Width X 25/32 In Depth
  (3)
• 1-19/32 In Width X 1-19/32 In Depth
  (6)
• 12-1/2 In Length X 6 In Height
  (2)
• 14-1/2 In Length X 6 In Height
  (2)
• 16-1/2 In Length X 6 In Height
  (2)
• 18-1/2 In Length X 6 In Height
  (1)
• 20-1/2 In Length X 6 In Height
  (2)
• 6 In Length X 3-1/2 In Height
  (2)
• 12 In Length X 3-1/2 In Height
  (3)
• 18 In Length X 3-1/2 In Height
  (2)
• 24 In Length X 3-1/2 In Height
  (2)
• 12 In Length X 6-1/4 In Height
  (1)
• 18 In Length X 6-1/4 In Height
  (2)
• 24 In Length X 6-1/4 In Height
  (3)
• 30 In Length X 6-1/4 In Height
  (1)
• 36 In Length X 6-1/4 In Height
  (2)
• 1/16 To 7/8 In
  (9)
• 9 In Length X 1-1/4 In Width
  (1)
• 12 In Length X 1-1/4 In Width
  (2)
• 15 In Length X 1-1/4 In Width
  (1)
• 18 In Length X 1-1/4 In Width
  (1)
• 1-11/16 In
  (6)
• 1-5/8 In X 1-3/4 In
  (3)
• 7-1/2 In Length
  (1)
• 10-3/8 In Length
  (1)
• 3-1/2 In Width X 9-1/8 In Height
  (1)
• 3-1/4 In Length
  (2)
• 1-21/32 In Width X 1-5/8 In Depth X 3-15/16 In Height
  (2)
• 1-21/32 in Width X 3-1/2 In Depth X 3-15/16 In Height
  (2)
• 5-3/8 In X 2-1/16 In
  (1)
• 5 In Length X 1-7/8 In Height
  (1)
• 4 In Length X 1-7/8 In Height
  (1)
• 3 In Width X 1-7/8 In Height
  (2)
• 4 In Width X 1-7/8 In Height
  (1)
• 8 In Height
  (1)
• 4-3/8 In X 5 In
  (5)
• 2-5/8 In Width X 2 In Height
  (2)
• 2-5/8 In Width X 3-7/8 In Height
  (1)
• 2-5/8 In Width X 1-5/8 In Height
  (1)
• 2-1/16 In Width X 3-3/4 In Height
  (2)
• 6 To 18 In
  (1)
• 7-5/8 In Length X 2-3/8 In Height
  (1)
• 9-5/8 In Length X 4-3/8 In Height
  (1)
• 11-5/8 In Length X 6-3/8 In Height
  (1)
• 1-5/8 In Depth X 1-5/8 In Height
  (3)
• 1/2 In (Pipe)
  (1)
• 1-5/8 In Width
  (1)
• 1-7/8 In Width X 1-7/8 In Height
  (1)
• 1-7/8 In X 3-7/16 In X 1-11/16 In
  (1)
• 4 In Length X 3-1/2 In Width
  (1)
• 9 In Length X 4-5/8 In Height
  (3)
• 12 In Length X 4-5/8 In Height
  (4)
• 14 In Length X 4-5/8 In Height
  (1)
• 6 In Length X 4-5/8 In Height
  (2)
• 13/16 In Width X 1-5/8 In Height
  (1)
• 13/16 In Width X 13/16 In Height
  (1)
• 5-7/16 In Width X 1-7/8 In Depth
  (1)
• 1-7/8 In Width X 3-7/8 In Height
  (1)
• 1-7/8 In Width X 5-7/8 In Height
  (1)
• 1-7/8 In Width X 7-7/8 In Height
  (1)
• 1-7/8 In Width X 9-7/8 In Height
  (1)
• 5-7/16 In Width X 3-1/2 In Depth
  (1)
• 3-1/2 In Width X 5-3/8 In Depth
  (1)
• 2-1/8 In
  (5)
• 3/8 In-16 TPI Hex Nut
  (1)
• 1/2 In-13 TPI Hex Nut
  (1)
• 1/2 In-13 TPI Hex Head Cap Screw
  (1)
• 3/8 In-16 TPI Hex Nut X 3/8 In-16 TPI Hex Nut
  (1)
• 1/2 In-13 TPI Hex Nut X 1/2 In-13 TPI Hex Nut
  (1)
• 3/8 In-16 TPI Hex Nut X 3/8 In-16 TPI Hex Head Cap Screw
  (1)
• 1/2 In-13 TPI Hex Nut X 1/2 In-13 TPI Hex Head Cap Screw
  (1)
• 5-1/8 In Length X 5/8 In Height
  (2)
• 1-1/4 In Length
  (2)
• 3 In Length
  (2)
• 1-7/8 In Width X 6-7/8 In Height
  (2)
• 1-7/8 In Width X 4-7/8 In Height
  (2)
• 3-3/4 In Width X 5-3/8 In Depth X 4-3/16 In Height
  (4)
• 3-1/2 In Length X 3-1/4 In Width
  (1)
• 3-5/8 In Length X 5-3/8 In Height
  (2)
• 2 In Width X 1-7/8 In Height
  (2)
• 3-15/32 In Length
  (2)
• 3 In Width X 4-7/8 In Height
  (1)
• 4-1/8 In Length X 1-5/8 In Width X 5-3/8 In Height
  (2)
• 10-1/2 In Length X 4 In Height
  (1)
• 8-7/8 In Length
  (1)
• 7-1/16 In Width X 3-1/2 In Depth
  (1)
• 5-7/16 In Width X 4-7/8 In Height
  (1)
• 1-3/8 In Width X 1-1/2 In Depth
  (1)
• 1-7/16 In Width X 1-1/4 In Depth X 2-1/2 In Height
  (1)
• 1-5/8 In Length X 1-5/8 In Width
  (1)
• 1-5/8 In Width X 3-1/2 In Height
  (2)
• 6-1/4 In Length X 1-21/32 In Width
  (1)
• 24 In Length
  (1)
• 30 In Length
  (1)
• 36 In Length
  (1)
• 3/8 In-16 TPI To 1/4 In-20 TPI
  (1)
• 1/2 In-13 TPI To 3/8 In-16 TPI
  (1)
• 5/8 In-11 TPI To 1/2 In-13 TPI
  (1)
• 2-1/2 In Depth X 5-1/8 In Width X 5-1/8 In Height
  (1)
• 3/8 In (J-Hook)
  (5)
• 3/4 In Height
  (1)
• 11/16 In Diameter
  (5)
• 13/16 In Diameter
  (2)
• 8 In Length X 3 In Width X 1-5/8 In Height
  (4)
• 8 In Length X 3 In Width X 3-1/2 In Height
  (5)
• 3-1/4 In Width
  (1)
• 16 To 30 In
  (1)
• 1-7/8 In X 3-15/16 In X 5-3/8 In
  (1)
• 4-1/2 In Length
  (8)
• 2-5/16 In Length
  (2)
• 1-7/8 In Width X 4 In Depth X 4 In Height
  (8)
• 12 In Length X 8-3/4 In Height
  (1)
• 18 In Length X 8-3/4 In Height
  (1)
• 24 In Length X 8-3/4 In Height
  (1)
• 30 In Length X 11-1/4 In Height
  (1)
• 36 In Length X 11-1/4 In Height
  (1)
• 42 In Length X 16 In Height
  (1)
• 48 In Length X 16 In Height
  (1)
• 9-3/16 In Width X 3-7/8 In Height
  (2)
• 1/4 In (OD), 1/8 In (Copper Tube)
  (2)
• 3/8 In (OD), 1/4 In (Copper Tube)
  (2)
• 1/2 In (OD), 3/8 In (Copper Tube)
  (2)
• 5/8 In (OD), 1/2 In (Copper Tube)
  (2)
• 3/4 In (OD), 5/8 In (Copper Tube)
  (2)
• 7/8 In (OD), 3/4 In (Copper Tube)
  (2)
• 1-1/8 In (OD), 1 In (Copper Tube)
  (2)
• 1-3/8 In (OD), 1-1/4 In (Copper Tube)
  (2)
• 1-5/8 In (OD), 1-1/2 In (Copper Tube)
  (2)
• 2-1/8 In (OD), 2 In (Copper Tube)
  (2)
• 7 In
  (1)
• 10-3/4 In
  (2)
• 12-3/4 In
  (1)
• 2-1/4 In
  (2)
• 2-5/8 In
  (2)
• 3-1/8 In
  (2)
• 3-1/4 In
  (1)
• 3-3/8 In
  (2)
• 3-5/8 In
  (4)
• 3-3/4 In
  (1)
• 3-7/8 In
  (1)
• 4-1/8 In
  (1)
• 4-1/4 In
  (1)
• 4-3/8 In
  (1)
• 4-5/8 In
  (1)
• 4-7/8 In
  (1)
• 5-1/8 In
  (1)
• 5-1/4 In
  (2)
• 5-3/8 In
  (1)
• 5-5/8 In
  (1)
• 5-3/4 In
  (1)
• 5-7/8 In
  (1)
• 6-1/8 In
  (1)
• 6-1/4 In
  (1)
• 6-3/8 In
  (1)
• 6-1/2 In
  (1)
• 6-3/4 In
  (1)
• 7-1/2 In
  (1)
• 8-1/8 In
  (1)
• 1/2 In (Rigid), 3/4 In (EMT)
  (2)
• 3/4 In (Rigid), 1 In (EMT)
  (2)
• 1 In (Rigid), 1-1/4 In (EMT)
  (2)
• 1-1/4 In (Rigid), 1-1/2 In (EMT)
  (1)
• 1-1/2 In (Rigid), 2 In (EMT)
  (1)
• 2-1/2 In (Rigid/EMT)
  (1)
• 3 In (Rigid/EMT)
  (1)
• 3-1/2 In (Rigid/EMT)
  (1)
• 4 In (Rigid/EMT)
  (1)
• 2-5/8 In Height
  (1)
• 2-1/4 In Width X 3 In Depth
  (1)
• 2-1/4 In Width X 4 In Depth
  (1)
• 1-5/16 In
  (2)
• 1-13/16 In Width
  (2)
• 8 In Length X 1-1/4 In Width
  (1)
• 10 In Length X 1-1/4 In Width
  (1)
• 1/4 In (A), 1/4 In (B)
  (1)
• 3/8 In (A), 3/8 In (B)
  (1)
• 1/4 In (A), 1/2 In (B)
  (1)
• 1-5/8 In Width X 2-3/8 In Height
  (4)
• 1-5/8 In Width X 3-1/8 In Height
  (2)
• 1-3/8 In Width X 3 In Height
  (1)
• 3/8 In Plain/Threaded Rod
  (1)
• 3/4 In Depth
  (6)
• 16 In Width X 7-25/32 In Height
  (1)
• 16 In Length X 7-25/32 In Height
  (1)
• 18 In Length X 7-25/32 In Height
  (1)
• 1-7/8 In Width X 5-13/16 In Depth X 5-3/8 In Height
  (3)
• 8 In Width X 9-5/8 In Height
  (1)
• 14 In Height
  (1)
• 12 In Length X 7-25/32 In Height
  (1)
• 1/2 In Rod
  (1)
• 5/8 In Rod
  (1)
• 3/4 In Rod
  (1)
• 1/4 In, 3/8 In
  (1)
• 5/8 In OD
  (3)
• 2-1/8 In OD
  (3)
• 1/2 In OD
  (2)
• 4 In IPS
  (1)
• 3/8 In OD
  (2)
• 1-5/8 In OD
  (3)
• 7/8 In OD
  (3)
• 3/4 In IPS, 1-1/8 In OD
  (3)
• 3-1/8 In OD
  (2)
• 2-5/8 In OD
  (3)
• 4-1/8 In OD
  (1)
• 1-3/8 In OD
  (3)
• 1-1/2 In IPS, 1-7/8 In OD
  (3)
• 6 In IPS
  (1)
• 3-5/8 In OD
  (1)
• 3/16 In Diameter X 1-1/4 In Length
  (1)
• 1/4 In Diameter X 1-1/4 In Length
  (1)
• 1/4 In Diameter X 1-3/4 In Length
  (1)
• 1/4 In Diameter X 2-1/4 In Length
  (1)
• 3/4 In (EMT/Rigid)
  (1)
• 3/8 In Diameter X 1-1/2 In Length
  (2)
• 3/8 In Diameter X 2 In Length
  (1)
• 3/8 In-16 TPI X 3 In Length
  (1)
• 1/2 In-13 TPI X 3 In Length
  (1)
• 5/8 In-11 TPI X 1-1/4 In Length
  (1)
• 5/8 In-11 TPI X 2-1/2 In Length
  (1)
• 5/8 In-11 TPI X 3-1/2 In Length
  (1)
• 5/8 In-11 TPI X 3-3/4 In Length
  (1)
• 5/8 In-11 TPI X 4 In Length
  (1)
• M10 X 1.5 mm
  (4)
• 3/8 In Diameter X 1 In Length
  (2)
• 3/8 In Diameter X 1-1/4 In Length
  (1)
• 1/2 In Diameter X 1 In Length
  (2)
• 1/2 In Diameter X 1-1/4 In Length
  (2)
• 1/2 In Diameter X 1-1/2 In Length
  (2)
• 1/2 In Diameter X 7/8 In Length
  (1)
• M12 X 1.75 mm
  (2)
• M6 X 1 mm
  (3)
• 3 In Length X 3 In Width
  (4)
• 4 In Length X 4 In Width
  (4)
• 18 In Length X 18 In Width
  (3)
• 4 In Length X 36 In Width
  (1)
• 6 In Length X 6 In Width
  (3)
• 2 In Length X 2 In Width
  (3)
• 8 In Length X 8 In Width
  (1)
• 5 In Length X 5 In Width
  (1)
• 9.365 IN X 6.4 IN X 1.106 IN
  (1)
• 18.719 IN X 18.719 IN X 1.625 IN
  (1)
• 1/2 x 1/4 in
  (1)
• 3/4 x 1/4 in
  (1)
• 3/4 x 3/8 in
  (1)
• 1 x 3/8 in
  (1)
• 2-1/2 X 1/2
  (1)
• 2-1/2 x 3/4 in
  (1)
• 2-1/2 x 1 in
  (1)
• 2-1/2 x 1-1/4 in
  (1)
• 2-1/2 x 1-1/2 in
  (1)
• 3 x 1 in
  (1)
• 3 x 1-1/4 in
  (1)
• 3 x 1-1/2 in
  (1)
• 4 x 1-1/4 in
  (1)
• 4 x 1-1/2 in
  (1)
• 1"
  (7)
• 1-1/2"
  (9)
• 2"
  (9)
• 2-1/2"
  (4)
• 1/2" x 3/4"
  (1)
• 1-1/2" x 2"
  (1)
• 1-1/4" x 1-1/2"
  (1)
• 1" x 1-1/4"
  (1)
• 3/4" x 1"
  (1)
• 1" x 1/4"
  (1)
• 1/4" 10'
  (1)
• 1-1/4"
  (6)
• 1/2"
  (6)
• 3"
  (2)
• 4"
  (2)
• 3/4"
  (7)
• 1" 45 Degree
  (2)
• 1-1/4" 45 Degree
  (2)
• 1-1/2" 45 Degree
  (2)
• 2" 45 Degree
  (2)
• 2-1/2" 45 Degree
  (2)
• 3" 45 Degree
  (2)
• 4" 45 Degree
  (2)
• 1/2" 45 Degree
  (2)
• 3/4" 45 Degree
  (2)
• 1" 3/0-6 AWG
  (1)
• 1" 4-14 AWG
  (1)
• 1-1/4" 3/0-6 AWG
  (1)
• 1-1/4" 4-14 AWG
  (1)
• 1-1/2" 3/0-6 AWG
  (1)
• 1-1/2" 4-14 AWG
  (1)
• 2" 3/0-6 AWG
  (1)
• 2" 4-14 AWG
  (1)
• 1/2" 3/0-6 AWG
  (1)
• 1/2" 4-14 AWG
  (1)
• 3/4" 3/0-6 AWG
  (1)
• 3/4" 4-14 AWG
  (1)
• 3/8" x 2"
  (1)
• 3/8" x 4"
  (1)
• 3/8" x 6"
  (1)
• 3/8"
  (1)