Electrical Box Hardware and Accessories

Accessory Type

• Holds for MC/BX cable
  (2)

Certified Listed

• UL Listed
  (14)
• cULus Listed
  (18)

Collection Name

• BOX-LOC
  (1)
• RETRO-RING
  (1)
• FLUSH-FIT
  (1)
• KWIK-HANG
  (1)
• GRAND SLAM;STAB-IT
  (1)
• None
  (2)
• ProReady
  (1)

Color

• Silver
  (35)
• Black
  (2)
• Green
  (16)
• Gray
  (7)
• Red
  (1)
• Clear
  (1)

Consist Of

• Mounting hardware
  (3)
• Adjustment screw, washer
  (1)
• 2, 1-1/8 IN screws
  (1)
• 4-way combo head ground screw
  (10)
• Two discs with bolt and nut
  (4)
• Flat square ring with two wings
  (2)
• Adjusts up to 24" width
  (1)
• 16" Stud Spacing
  (1)
• 24" Stud Spacing
  (1)

Construction

• One Piece
  (6)
• Welded
  (1)
• Stamped steel
  (33)
• Molded plastic
  (1)
• Spring steel
  (1)
• Two piece
  (4)
• Unpainted steel
  (2)

Cubic Capacity

• 24.5 cu.in
  (1)
• 11.52 cu.in
  (1)
• 55.3125 cu.in
  (1)

Description - Long

• Concrete Ring, Welded, 4 in. Deep, Single Row 1/2 & 3/4 in. KO's
  (1)
• Replacement Plaster Ears, Open Style with Screws
  (1)
• Replacement Plaster Ears, Clipped Style with Screws
  (1)
• Replacement Plaster Ears, 1-Screw Style with Screws
  (1)
• Switch Box Support
  (1)
• Low-Voltage Box Partition for 686 and 687 Switch Boxes
  (1)
• Low Voltage Partition for 1-5/8 in. Deep Gang Boxes
  (1)
• Add-a-Depth Switch Box Ring
  (1)
• Plastic Far Side Support, 1-7/8 in. Rigid
  (1)
• BOX-LOC Metal Stud Clip, Spring Steel Bracket
  (1)
• #14 Solid Insulated Copper Wire Pigtail, 6 in. Length (25/BE)
  (1)
• #14 Solid Bare Copper Wire Pigtail, 6 in. Length (25/BE)
  (1)
• #14 Stranded Insulated Copper Wire Pigtail, 8 in. Length (100/BE)
  (1)
• #12 Stranded Insulated Copper Wire Pigtail, 8 in. Length (100/BE)
  (1)
• #14 Solid Insulated Copper Wire Pigtail, 8 in. Length (25/BE)
  (1)
• #12 Solid Insulated Copper Wire Pigtail, 8 in. Length (25/BE)
  (1)
• #14 Solid Bare Copper Wire Pigtail, 8 in. Length (25/BE)
  (1)
• 4-Way Combo Head, Green Dye Finish, 3/8 in. Ground Screw for 10-32 Tapped Hole (100/Clam)
  (1)
• 2-1/2 in. 2-Piece Knockout Seal
  (1)
• 3 in. 2-Piece Knockout Seal
  (1)
• 3-1/2 in. 2-Piece Knockout Seal
  (1)
• 4 in. 2-Piece Knockout Seal
  (1)
• 1/2 in. 1-Piece Knockout Seal
  (1)
• 3/4 in. 1-Piece Knockout Seal
  (1)
• 1 in. 1-Piece Knockout Seal
  (1)
• 1-1/4 in. 1-Piece Knockout Seal
  (1)
• 1-1/2 in. 1-Piece Knockout Seal
  (1)
• 2 in. 1-Piece Knockout Seal
  (1)
• Fixed Position Box Mounting Bracket, 3 Boxes for 16 in. O.C. Studs
  (1)
• Fixed Position Box Mounting Bracket, 4 Boxes for 24 in. O.C. Studs
  (1)
• 1-Gang Low Voltage Mounting Bracket for New or Old Work
  (1)
• 12 in. Tall Bracket, Floor Mounted Box Support
  (1)
• 18 in. Tall Bracket, Floor Mounted Box Support
  (1)
• Single-Gang Low-Voltage Device Mounting Bracket
  (1)
• 2-Point Box Mounting Bracket for Left or Right Side Stud Mount
  (1)
• Slotted Head, Green Dye Finish, 3/8 in. Ground Screw for 10-32 tapped Hole (100/Clam)
  (1)
• Green Ground Clip, for #14-#10 AWG, Copper (100/Clam)
  (1)
• GRIP-LOK, Old-Work Switch Box Support (1/PR)
  (1)
• #12 Solid Insulated Copper Wire Pigtail, 6 in. Length (25/BE)
  (1)
• Old-Work Switch Box Supports (2-Pk)
  (1)
• 1-Device Cable Protector Plate, 3/4 in. Raised
  (1)
• 2-Device Cable Protector Plate, Flat
  (1)
• 4 in. Square RETRO-RING, Old Work, Used for Life Safety Support
  (1)
• 1-Device Cable Protector Plate, Flat
  (1)
• 2-Device Cable Protector Plate, 3/4 in. Raised
  (1)
• 1-Device Cable Protector Plate, 3/4 in. Raised, Low-Voltage
  (3)
• Gangable Cable Protector Plates for RACO 686, 687, and Nongangable Masonry Boxes
  (1)
• 4 in. Square RETRO-RING, Old Work, Used for Mounting of One of Two Device Applications
  (1)
• Flat, Gangable Cable Protector Plates for RACO 686, 687, and Nongangable Masonry Boxes
  (1)
• Round Cable Protector Plate, 2-3/4 in. O.C. Opening
  (1)
• Adjustable Box Mounting Brace, Adjust 10-3/8 in. to 18 in., for 4 in. or 4-11/16 in. Square Boxes that are 1-1/2 in. or 2-1/8 in. Deep
  (1)
• Adjustable Box Mounting Brace, Adjust 15 in. to 26 in., for 4 in. or 4-11/16 in. Square Boxes that are 1-1/2 in. or 2-1/8 in. Deep
  (1)
• Non-Adjustable Box Mounting Brace, For 24 in. Stud Spacing for 4 in. or 4-11/16 in. Square Boxes that are 1-1/2 in. or 2-1/8 in. Deep
  (1)
• Non-Adjustable Box Mounting Brace, For 16 in. Stud Spacing for 4 in. or 4-11/16 in. Square Boxes that are 1-1/2 in. or 2-1/8 in. Deep
  (1)
• Voltage Partition for 260, 260H, 911-15 and 263 Boxes
  (1)
• 4 in. Square RETRO-RING, Old Work, Used for Life Safety Support, Red
  (1)
• Flush-Fit Device Leveling Plate
  (1)
• 24 in. Span Between 2 Metal or Wood Studs
  (1)
• KWIK-HANG Box Support Hanger
  (1)
• STAB-IT Connector for RACO Grand Slam Boxes
  (1)
• Adjustable Open Box Mounting Bracket
  (1)
• Open Center Bracket for 16 inch Stud Spacing
  (1)
• Open Center Bracket for 24 inch Stud Spacing
  (1)
• Partition for Gangable Boxes 985 and 986
  (1)
• 1-Gang Protector Plate - 3/4 in. Raised
  (1)
• 2-Gang Protector Plate - 3/4 in. Raised
  (1)
• Flat Box/Conduit Support Plate, 12 inches
  (1)
• Lanced Box/Conduit Support Plate, 12 inches
  (1)
• Flat Box/Conduit Support Plate, 18 inches
  (1)
• OPEN CENTER BOX BRACKE, LARGER OPENING ACCOMODATES THE ULTIMATE G & UNIVERSAL S SERIES
  (1)

Description - Marketing Copy

• Add-A-Depth ring or "goof ring" is designed to act as a barrier between combustible wall surfaces and the wiring system. This product can be used for single or two-gang device boxes that are set too deep in the wall.
  (1)
• Raco Far Side Box Support provides support for installed electrical boxes. The Far Side Support easily snaps onto the hole located on the back side of the box. Once installed, the Far Side Support prevents the box from floating, or being pushed back into the wall cavity.
  (1)
• Raco Box BOX-LOC metal stud clips are for use when installing a Raco 4 in. or 4 11/16 in. box to a metal stud. BOX-LOC clips are designed to attach the box to either side of the stud. The clips install easily in seconds and without tools.
  (1)
• Close off unused openings in junction boxes or panel boards with RACO knockout seals. Zinc steel seals provide installation integrity. 2-piece design makes installation easy.
  (4)
• Close off unused openings in junction boxes or panel boards with RACO knockout seals. Zinc steel seals provide installation integrity. Snap-in design makes installation easy.
  (6)
• Raco Mounting Bracket supports electrical boxes when mounted to a stud. The mounting bracket positions the electrical boxes, plaster ears and low voltage devices between studs. The bracket accommodates up to three boxes for 16 in. on center studs.
  (1)
• Raco Mounting Bracket supports electrical boxes when mounted to a stud. The mounting bracket positions the electrical boxes, plaster ears and low voltage devices between studs. The bracket accommodates up to four boxes for 16 in. on center studs.
  (1)
• Raco Mounting Bracket supports 3 in. x 2 in. switch boxes when mounted to a stud. It mounts standard Low-Voltage wall plates, old work or new work. The mounting bracket is for a single gang.
  (1)
• Raco Mounting Bracket supports electrical boxes when mounted to a stud. The bracket is made from zinc-pre coated steel. The mounting bracket is either for left or right side stud mount.
  (1)
• Raco Non-Adjustable Mounting Bracket is for the 4 in. or 4-11/16 in. electrical box. The bracket adjusts from 10-3/8 in. to 18 in. stud spacing. The bracket can be used for metal or wood stud box positioning.
  (1)
• Raco Non-Adjustable Mounting Bracket is for the 4 in. or 4-11/16 in. electrical box. The bracket adjusts from 15 in. to 26 in. stud spacing. The bracket can be used for metal or wood stud box positioning.
  (1)
• STAB-IT Connector for use only with RACO Grand Slam Boxes. Each connector accepts up to two cables. Connector includeds hardware to mount to RACO Grand Slam Boxes.
  (1)
• RACO's Adjustable Open Center Bracket adjusts from 16" to 24" for mounting boxes between both metal and wood studs.
  (1)
• RACO Open Center bracket allows the installer to easily positon and adjust electrical boxes and mud ring between studs. Featuring a built-in cable management system, which offers first means of support for flexible cable. The Open Center Bracket reduces assembly and installation time on the job site.
  (2)

Description - Short

• Concrete Ring, Welded, 4 in. Deep, Single Row 1/2 & 3/4 in. KO's
  (1)
• Replacement Plaster Ears, Open Style with Screws
  (1)
• Replacement Plaster Ears, Clipped Style with Screws
  (1)
• Replacement Plaster Ears, 1-Screw Style with Screws
  (1)
• Switch Box Support
  (1)
• Low-Voltage Box Partition for 686 and 687 Switch Boxes
  (1)
• Low Voltage Partition for 1-5/8 in. Deep Gang Boxes
  (1)
• Add-a-Depth Switch Box Ring
  (1)
• Plastic Far Side Support, 1-7/8 in. Rigid
  (1)
• BOX-LOC Metal Stud Clip, Spring Steel Bracket
  (1)
• #14 Solid Insulated Copper Wire Pigtail, 6 in. Length (25/BE)
  (1)
• #14 Solid Bare Copper Wire Pigtail, 6 in. Length (25/BE)
  (1)
• #14 Stranded Insulated Copper Wire Pigtail, 8 in. Length (100/BE)
  (1)
• #12 Stranded Insulated Copper Wire Pigtail, 8 in. Length (100/BE)
  (1)
• #14 Solid Insulated Copper Wire Pigtail, 8 in. Length (25/BE)
  (1)
• #12 Solid Insulated Copper Wire Pigtail, 8 in. Length (25/BE)
  (1)
• #14 Solid Bare Copper Wire Pigtail, 8 in. Length (25/BE)
  (1)
• 4-Way Combo Head, Green Dye Finish, 3/8 in. Ground Screw for 10-32 Tapped Hole (100/Clam)
  (1)
• 2-1/2 in. 2-Piece Knockout Seal
  (1)
• 3 in. 2-Piece Knockout Seal
  (1)
• 3-1/2 in. 2-Piece Knockout Seal
  (1)
• 4 in. 2-Piece Knockout Seal
  (1)
• 1/2 in. 1-Piece Knockout Seal
  (1)
• 3/4 in. 1-Piece Knockout Seal
  (1)
• 1 in. 1-Piece Knockout Seal
  (1)
• 1-1/4 in. 1-Piece Knockout Seal
  (1)
• 1-1/2 in. 1-Piece Knockout Seal
  (1)
• 2 in. 1-Piece Knockout Seal
  (1)
• Fixed Position Box Mounting Bracket, 3 Boxes for 16 in. O.C. Studs
  (1)
• Fixed Position Box Mounting Bracket, 4 Boxes for 24 in. O.C. Studs
  (1)
• 1-Gang Low Voltage Mounting Bracket for New or Old Work
  (1)
• 12 in. Tall Bracket, Floor Mounted Box Support
  (1)
• 18 in. Tall Bracket, Floor Mounted Box Support
  (1)
• Single-Gang Low-Voltage Device Mounting Bracket
  (1)
• 2-Point Box Mounting Bracket for Left or Right Side Stud Mount
  (1)
• Slotted Head, Green Dye Finish, 3/8 in. Ground Screw for 10-32 tapped Hole (100/Clam)
  (1)
• Green Ground Clip, for #14-#10 AWG, Copper (100/Clam)
  (1)
• GRIP-LOK, Old-Work Switch Box Support (1/PR)
  (1)
• #12 Solid Insulated Copper Wire Pigtail, 6 in. Length (25/BE)
  (1)
• Old-Work Switch Box Supports (2-Pk)
  (1)
• 1-Device Cable Protector Plate, 3/4 in. Raised
  (1)
• 2-Device Cable Protector Plate, Flat
  (1)
• 4 in. Square RETRO-RING, Old Work, Used for Life Safety Support
  (1)
• 1-Device Cable Protector Plate, Flat
  (1)
• 2-Device Cable Protector Plate, 3/4 in. Raised
  (1)
• 1-Device Cable Protector Plate, 3/4 in. Raised, Low-Voltage
  (3)
• Gangable Cable Protector Plates for RACO 686, 687, and Nongangable Masonry Boxes
  (1)
• 4 in. Square RETRO-RING, Old Work, Used for Mounting of One of Two Device Applications
  (1)
• Flat, Gangable Cable Protector Plates for RACO 686, 687, and Nongangable Masonry Boxes
  (1)
• Round Cable Protector Plate, 2-3/4 in. O.C. Opening
  (1)
• Adjustable Box Mounting Brace, Adjust 10-3/8 in. to 18 in., for 4 in. or 4-11/16 in. Square Boxes that are 1-1/2 in. or 2-1/8 in. Deep
  (1)
• Adjustable Box Mounting Brace, Adjust 15 in. to 26 in., for 4 in. or 4-11/16 in. Square Boxes that are 1-1/2 in. or 2-1/8 in. Deep
  (1)
• Non-Adjustable Box Mounting Brace, For 24 in. Stud Spacing for 4 in. or 4-11/16 in. Square Boxes that are 1-1/2 in. or 2-1/8 in. Deep
  (1)
• Non-Adjustable Box Mounting Brace, For 16 in. Stud Spacing for 4 in. or 4-11/16 in. Square Boxes that are 1-1/2 in. or 2-1/8 in. Deep
  (1)
• Voltage Partition for 260, 260H, 911-15 and 263 Boxes
  (1)
• 4 in. Square RETRO-RING, Old Work, Used for Life Safety Support, Red
  (1)
• Flush-Fit Device Leveling Plate
  (1)
• 24 in. Span Between 2 Metal or Wood Studs
  (1)
• KWIK-HANG Box Support Hanger
  (1)
• STAB-IT Connector for RACO Grand Slam Boxes
  (1)
• Adjustable Open Box Mounting Bracket
  (1)
• Open Center Bracket for 16 inch Stud Spacing
  (1)
• Open Center Bracket for 24 inch Stud Spacing
  (1)
• Partition for Gangable Boxes 985 and 986
  (1)
• 1-Gang Protector Plate - 3/4 in. Raised
  (1)
• 2-Gang Protector Plate - 3/4 in. Raised
  (1)
• Flat Box/Conduit Support Plate, 12 inches
  (1)
• Lanced Box/Conduit Support Plate, 12 inches
  (1)
• Flat Box/Conduit Support Plate, 18 inches
  (1)
• OPEN CENTER BOX BRACKET FOR G & S SERIES
  (1)

Description - Slang

• Plaster Ears
  (3)
• Box Support
  (2)
• Low-Voltage Partition
  (1)
• Switch Box Ring
  (1)
• Side Support
  (1)
• Metal Stud Clip
  (1)
• Insulated Copper Wire Pigtail
  (3)
• Bare Copper Wire Pigtail
  (1)
• 4-Way Combo Head Ground Screw
  (1)
• 1-Piece Knockout Seal
  (2)
• Mounting Brackets
  (2)
• Low Voltage Mounting Bracket
  (1)
• Floor Mounted Box Support
  (2)
• Low Voltage Mounted Box Support
  (1)
• Mounting Bracket
  (2)
• Slotted Head Ground Screw
  (1)
• Ground Clip
  (1)
• Cable Protector Plate
  (12)
• Square RETRO-RING
  (3)
• Mounting Brace
  (4)
• Voltage Partition
  (1)
• Leveling Plate
  (1)
• Stud Spanner Bar
  (1)
• Support hanger
  (1)
• Connector for Grand Slam Boxes
  (1)
• Center Bracket
  (3)
• Partition
  (1)
• Flat Box Conduit Support Plate
  (2)
• Lanced Box Conduit Support Plate
  (1)
• Repair Clip
  (2)

Drawn or Welded

• Welded
  (1)

EU RoHS Indicator

• Contact Manufacturer
  (55)
• Yes
  (1)

FEATURES - Bullets

• Single row of 1/2 in. and 3/4 in. knockouts;Flat sides provide excellent contact for locknuts;External ears are used to nail the ring to the wood form;Top cover is removable for before-pour work;Waxed fixture ears prevent concrete from interfering with the threads;Ears on inside of box are for fixtures;Support a light fixture up to 50 pounds;24.5 cu. in. capacity
  (1)
• Replacement ears to mount on Raco boxes 410, 420, 440, 445, 500, 503, 506, 508, 526, 545, 560, 565, 567, 570RAC, 590, 600 and 601;Use for old-work application;Mounting screws provided;Use with 1/2 in. thick standard drywall
  (1)
• Replacement ears to mount on Raco boxes 150, 400, and 591;Use for old-work application;Mounting screws provided;Use with 1/2 in. thick standard drywall
  (1)
• Replacement ears to mount on RACO boxes 471, 487, 517, 518, 519, and 523;Use for old-work application;Mounting screws provided;Use with 1/2 in. thick standard drywall
  (1)
• Installs into the 1/2 in. bottom conduit knockout inside the switch box;Durable, rigid steel construction;Maximum use with 3/4 in. thick sheetrock
  (1)
• Fits both 2-1/2 in. and 3-1/2 in deep masonry boxes;To separate low-voltage circuit from current carrying circuitry;Cover made from zinc, pre-coated, steel
  (1)
• Partitions divide boxes into compartments;Steel is 1/16 in. thick;Cover made from zinc, pre-coated, steel
  (1)
• Steel construction;Adjustment range 1/4 - 1 inch;Includes two 1-1/8 inch screws;Subject to acceptance by an electric inspector;No UL standard for this product;Note: Product may vary by store
  (1)
• Simply snaps into hole in back of box and is easily cut to fit wall cavity;1-7/8 in.;Made from rigid plastic;Easy to cut to depth required to fit wall cavity
  (1)
• Spring steel design, with barbed hooks, secures bracket in place in seconds without tools;Steel construction;Can also be used on Raco 7220 and 7232 non-metallic 4 in. square boxes;Repositions on metal stud easily
  (1)
• RACO 6" and 8" ground pigtails feature 4-way slotted, phillips, hex-head) combo 10-32 captive screws;#14 solid insulated copper wire;Captive four-way combo head ground screw;6 in. wire length
  (1)
• RACO 6" and 8" ground pigtails feature 4-way slotted, phillips, hex-head) combo 10-32 captive screws;#14 solid un-insulated copper wire;Captive four-way combo head ground screw;6 in. wire length;Suitable for 10-32 threaded hole
  (1)
• RACO 6" and 8" ground pigtails feature 4-way slotted, phillips, hex-head) combo 10-32 captive screws;#14 stranded insulated wire with spade terminal;Captive four-way combo head ground screw;8 in. wire length;Suitable for 10-32 threaded hole
  (1)
• RACO 6" and 8" ground pigtails feature 4-way slotted, phillips, hex-head) combo 10-32 captive screws;#12 stranded insulated wire with spade terminal;Captive 4-way combo head ground screw;8 in. wire length;Suitable for 10-32 threaded hole
  (1)
• RACO 6" and 8" ground pigtails feature 4-way slotted, phillips, hex-head) combo 10-32 captive screws
  (2)
• RACO 6" and 8" ground pigtails feature 4-way slotted, phillips, hex-head) combo 10-32 captive screws;#12 solid insulated copper wire;Captive four-way combo head ground screw;8 in. wire length;Suitable for 10-32 threaded hole
  (1)
• Four-way combo head;Green dye finish;Suitable for 10-32 threaded hole;3/8 in. Screw length
  (1)
• 2-piece design is lightweight and easy to use;Zinc-electroplated for added corrosion protection;UL Listed;Available in trade sizes 2-1/2 in. - 4 in.;Includes 2 discs, bolt and nut
  (4)
• Snap-in feature provides quick and secure installation;Zinc-electroplated for added corrosion protection;1-piece design is lightweight and easy to use;UL Listed;Available in trade sizes 1/2 in. through 2 in.
  (6)
• Fold-back stabilizer leg prevents bracket from being pushed back in wall cavity during drywall installation;Designed for 2-1/2 in. or 3-1/2 in. studs;Mounts 4 in. or 4-11/16 in. sq. boxes;Box can be mounted on ring without raised cover to save time by providing maximum work area inside box;When mounted, raised cover is brought to within 1/16 in. of drywall everytime and will not bulge or break drywall;Fold-back stabilizer leg prevents bracket from being pushed back into wall cavity;Made from zinc, pre-coated, steel
  (2)
• For use on low voltage Class 2 circuits only where electrical boxes are not required;Can be used to mount telephone jacks, computer outlets, security/sound systems, television antennas, etc.;Fast, precise mounting of low voltage wall plates to walls or studs
  (1)
• Fold back stabilizer prevents bracket from being pushed back in wall cavity during drywall installation;Designed for mounting square boxes 12" or 18" above floor. Mounts to metal or wood plate;Mounts 4" or 4-11/16" sq. boxes;Box can be mounted on support without drywall ring to save time by providing maximum working area in box;When mounted, raised cover is brought to within 1/16" of drywall everytime and will not bulge or break drywall
  (2)
• For use on low voltage Class 2 circuits only where electrical boxes are not required;Can be used to mount telephone jacks, computer outlets, security/sound systems, television antennas, etc.;Fast, precise mounting of low voltage wall plates to walls or studs;2 brackets per poly bag
  (1)
• Dual-point mounting, right or left side of stud. Perfect for prefab applications;Mounts 4 in. or 4-11/16 in. sq. box to 2-1/2 in., 3-1/2 in. or 6 in. depths;Far-side support leg for wall cavities up to 6 in. thick part of bracket;Support leg cannot be bent by other trades once properly mounted with junction box
  (1)
• Slotted head;Green dye finish;Suitable for 10-32 threaded hole;3/8 in. Screw length
  (1)
• Designed for use with solid No. 14, 12, and 10 gauge copper conductor;Green dye finish;Provide quick method of fastening ground conductor to edge of box
  (1)
• GRIP-LOK, Old-Work Switch Box Support (1/PR)
  (1)
• RACO 6" and 8" ground pigtails feature 4-way slotted, phillips, hex-head) combo 10-32 captive screws;#12 solid insulated copper wire;Captive four-way combo head ground screw;6 in. wire length;Suitable for 10-32 threaded hole
  (1)
• Old work switch box clips for use with 1/2" and 5/8" thick standard drywall;Replacement clips compatible with Raco switch boxes;Converts standard switch boxes to old-work applications;1 in. length
  (1)
• Raised - covers protect Decora, duplex, and switch devices.;Feature patented wire retrieval loop to hold data wire in place.;Prevents router bits from entering box, nicking insulation on installed wiring;Keeps debris and sheetrock mud from entering box;Easy snap-on and snap-off design; no installation hardware required;Silver
  (1)
• Flat - covers close off mudring opening to protect wiring from drywaller's router bit tolls.;Feature patented wire retrieval loop to hold data wire in place.;Steel construction;Mounts an electrical switch or receptacle;1 in. raised design;UL and CSA safety listings;Angled mounting slots ease installation
  (1)
• RACO RETRO-RING works in 3/8 in. to 1-1/2 in. thick wall or ceiling applications;Small footprint is covered by most popular life safety devices;Steel old work wings allow for secure mounting of box and devices to wall;Includes one wall template per carton;Steel old work wings allow for secure mounting of box to wall;Mounting holes on retro-ring are specific to alarm devices
  (1)
• Flat - covers close off mudring opening to protect wiring from drywaller's router bit tolls.;Feature patented wire retrieval loop to hold data wire in place.;Mount any combination of switch, duplex receptacle, GFCI;Made from zinc, pre-coated, steel;3.0 cu. in. capacity;UL CSA listed;Bar-coded
  (1)
• Raised - covers protect Decora, duplex, and switch devices.;Feature patented wire retrieval loop to hold data wire in place.;Includes required hardware for mounting the receptacle;Accepts single 2.141 in. Dia receptacle;Installation instructions on poly bag;10.3cu. in. capacity
  (1)
• Raised - covers protect Decora, duplex, and switch devices.;Feature patented wire retrieval loop to hold data wire in place.;Rugged metallic construction;State of the art powder coat paint finish provides a light texture finish and scratch resistance;5-1/4 in. round;2-3/16 in. mounting holes
  (1)
• Flat - covers close off mudring opening to protect wiring from drywaller's router bit tolls.;Feature patented wire retrieval loop to hold data wire in place.
  (2)
• Raised - covers protect Decora, duplex, and switch devices.;Feature patented wire retrieval loop to hold data wire in place.
  (1)
• RACO RETRO-RING works in 3/8 in. to 1-1/2 in. thick wall or ceiling applications;Small footprint is covered by most popular life safety devices;Steel old work wings allow for secure mounting of box and devices to wall;Includes one wall template per carton;206RAC allows for installation of steel low voltage partition for power/data applications. One or two devices mount directly to 206RAC
  (1)
• Raised - covers protect Decora, duplex, and switch devices.;Feature patented wire retrieval loop to hold data wire in place.;1/2 in. knockout included;Key-hole allows for installation of cover without removing the box screws;Pre-galvanized steel construction;UL listed
  (1)
• Flat - covers close off mudring opening to protect wiring from drywaller's router bit tolls.;Feature patented wire retrieval loop to hold data wire in place.;2 5/16 in. wide x 4 3/16 in. tall;Cover made from zinc, pre-coated, steel;Corners are contoured to fit handy boxes;Cover includes captive mounting screws
  (1)
• Available for 1-1/2 in. or 2-1/8 in. deep boxes;Locator dimples on face of bar allows for exact positioning of single or multiple boxes.;Dimple feature provides quick start of screws, and reinforcement to prevent box mounting screws from stripping out when box is mounted;Design of adjsutable brace allows ground screw to clear when box is mounted;Boxes attach easily with self-tapping screws
  (1)
• Available for 1-1/2 in. or 2-1/8 in. deep boxes;Locator dimples on face of bar allows for exact positioning of single or multiple boxes;Dimple feature provides quick start of screws, and reinforcement to prevent box mounting screws from stripping out when box is mounted;Design of adjsutable brace allows ground screw to clear when box is mounted;Boxes attach easily with self-tapping screws
  (1)
• Available for 1-1/2 in. or 2-1/8 in. deep boxes;Locator dimples on face of bar allows for exact positioning of single or multiple boxes;Dimple feature provides quick start of screws, and reinforcement to prevent box mounting screws from stripping out when box is mounted;Boxes attach easily with self-tapping screws
  (2)
• cULus Listed;Intended for use with large capacity boxes;Pre-galvanized steel construction insures durability;The partitions are scored for easy installation and fit for proper depth needed
  (1)
• RACO RETRO-RING works in 3/8 in. to 1-1/2 in. thick wall or ceiling applications;Small footprint is covered by most popular life safety devices;Steel old work wings allow for secure mounting of box and devices to wall;Includes one wall template per carton;Red boxes, covers and extensions for dedicated life safety alarm circu
  (1)
• Designed to easily repair electrical outlets that are recessed into the wall too far
  (1)
• 1 in. high profile, 1/8 in. mounting holes, on 1 in. centers;Heavy 20 gauge pre-galvanized steel construction for secure and rigid support of boxes in wall cavity
  (1)
• Durable steel construction;Quick installation;Use with cable, wire, chain, strut (not included) to secure from building structure;Locks securely into position;Installation instructions included
  (1)
• Designed for quick installation of flex, MC, MCI, MCI-A, AC, and HFC cable
  (1)
• Accepts both 4" square and 4-11/16" square boxes;Rigid design eliminates need for far-side support;Center cutout for quick and level installation;Can be cut for shorter spacing;UL Listed
  (1)
• Accepts both 4 in and 4-11/16 in square boxes;Opening gives installer flexibility of box position between studs;Features built-in first mean of support for securing and supporting MC cable
  (2)
• Partition for Gangable Boxes 985 and 986
  (1)
• Raised to protect decorator, duplex and switch device;For use with all styles of mud rings (raised, adjustable, hinged)
  (2)
• Mount horizontally or vertically from a single " threaded rod;Bendable tabs secure plate in vertical installation;Multiple markings for easier box alignment;Pre-punched holes for rear raceway access;Holes and slots provide limitless options for clamp or strap installation;Constructed of heavy 16 gauge galvanized steel
  (3)
• Eliminates the need to replace the electric box;Fits flush to the box with our patented design;Works on almost any plastic box type of thickness;Slides easily to align screw holes;Saves time and money for property managers and DIYers
  (2)
• Taller open center design, exclusively for Ultimate G serie brackets s and Universal Stud Mount brackets;Large opening allows multiple boxes to mount anywhere on the bracket;Adjustable for 16" to 24" studs;Rigid design eliminates the need for a box support in most cases;Use on wood or metal studs
  (1)

Fitting Type

• Knockout Seals
  (10)

Fixture Lbs.

• 50 lb.
  (1)

FV_BuyAmericanCompliant

• Contact Manufacturer
  (40)

FV_Certified Listed

• UL Listed
  (8)
• cULus Listed
  (17)

FV_Collection Name

• BOX-LOC
  (1)
• RETRO-RING
  (1)
• FLUSH-FIT
  (1)
• KWIK-HANG
  (1)
• GRAND SLAM;STAB-IT
  (1)
• None
  (2)

FV_Fitting Type

• Knockout Seals
  (10)

FV_Gangable

• No
  (1)

FV_HeightFeetAndInches

• 4.250"
  (1)
• 6.00"
  (1)

FV_Product Family

• Miscellaneous Fittings
  (10)

Gangable

• No
  (1)

Insulation

• Yes
  (8)
• Bare
  (2)

Knockouts

• 1/2 in;3/4 in
  (1)

Material

• Plastic
  (1)
• Steel
  (37)
• 996
  (1)
• 973
  (1)
• 981
  (1)
• 999
  (1)
• 989ST
  (1)
• Copper
  (9)
• Pre-Galvanized Steel
  (21)
• Soft Plastic
  (1)
• 20 Guage Steel
  (2)

Minimum Pack Quantity

• 100
  (11)
• 10
  (5)
• 25
  (11)
• 1000
  (9)
• 500
  (2)
• 20
  (3)
• 24
  (4)
• 50
  (1)
• 30
  (1)

Number of Gang(s)

• 1-Gang
  (1)
• 2-Gang
  (1)

Packaging Type

• Polybag
  (1)
• Bundle
  (8)
• Clam Shell
  (3)
• Pair
  (1)
• No Packaging
  (4)

Paintable/Stainable

• No
  (7)

Pallet Quantity

• 1750
  (1)
• 48000
  (3)
• 1860
  (1)
• 7000
  (2)
• 10800
  (1)
• 3600
  (2)
• 24000
  (3)
• 4550
  (1)
• 64000
  (4)
• 50000
  (2)
• 80000
  (3)
• 84000
  (1)
• 3960
  (2)
• 2800
  (2)
• 75000
  (2)
• 38400
  (1)
• 19200
  (1)
• 18000
  (1)
• 14175
  (1)
• 10500
  (1)
• 28800
  (1)
• 5400
  (2)
• 4200
  (1)
• 5760
  (2)
• 9000
  (1)
• 29400
  (1)
• 30000
  (1)
• 27600
  (1)
• 14000
  (2)
• 4760
  (3)
• 12800
  (2)
• 3840
  (2)
• 6000
  (1)
• 6720
  (1)
• 12000
  (1)
• 6750
  (1)
• 7200
  (1)
• 7875
  (1)
• 3030
  (1)
• 21600
  (1)
• 1200
  (1)
• 2400
  (1)
• 1600
  (1)
• 8400
  (1)
• 7776
  (1)
• 4320
  (1)
• 900
  (2)
• 400
  (1)
• 54600
  (1)
• 5460
  (1)
• 1125
  (1)

Product Name

• Concrete Ring, Welded, 4 in. Deep, Single Row 1/2 & 3/4 in. KO's
  (1)
• Replacement Plaster Ears - Open Style with Screws
  (1)
• Replacement Plaster Ears - Clipped Style with Screws
  (1)
• Replacement Plaster Ears, 1-Screw Style with Screws
  (1)
• Switch Box Support
  (1)
• Low-Voltage Box Partition for 686 and 687 Switch Boxes
  (1)
• Low Voltage Partition for 1-5/8 in. Deep Gang Boxes
  (1)
• Add-a-Depth Switch Box Ring
  (1)
• Plastic Far Side Support
  (1)
• BOX-LOC Metal Stud Clip
  (1)
• #14 Solid Insulated Copper Wire Pigtail, 6 in. Length (25/BE)
  (1)
• #14 Solid Bare Copper Wire Pigtail, 6 in. Length (25/BE)
  (1)
• #14 Stranded Insulated Copper Wire Pigtail, 8 in. Length (100/BE)
  (1)
• #12 Stranded Insulated Copper Wire Pigtail, 8 in. Length (100/BE)
  (1)
• #14 Solid Insulated Copper Wire Pigtail, 8 in. Length (25/BE)
  (1)
• #12 Solid Insulated Copper Wire Pigtail, 8 in. Length (25/BE)
  (1)
• #14 Solid Bare Copper Wire Pigtail, 8 in. Length (25/BE)
  (1)
• 4-Way Combo Head, Green Dye Finish, 3/8 in. Ground Screw for 10-32 Tapped Hole (100/Clam)
  (1)
• 2-1/2 in. 2-Piece Knockout Seal
  (1)
• 3 in. 2-Piece Knockout Seal
  (1)
• 3-1/2 in. 2-Piece Knockout Seal
  (1)
• 4 in. 2-Piece Knockout Seal
  (1)
• 1/2 in. 1-Piece Knockout Seal
  (1)
• 3/4 in. 1-Piece Knockout Seal
  (1)
• 1 in. 1-Piece Knockout Seal
  (1)
• 1-1/4 in. 1-Piece Knockout Seal
  (1)
• 1-1/2 in. 1-Piece Knockout Seal
  (1)
• 2 in. 1-Piece Knockout Seal
  (1)
• Floor Mount Mounting Brackets - 3 Boxes for 16 in. O.C. Studs
  (1)
• Floor Mount Mounting Brackets - 4 Boxes for 24 in. O.C. Studs
  (1)
• 1-Gang Low Voltage Mounting Bracket for New or Old Work
  (1)
• 12 in. Tall Bracket, Floor Mounted Box Support
  (1)
• 18 in. Tall Bracket, Floor Mounted Box Support
  (1)
• Single-Gang Low-Voltage Device Mounting Bracket
  (1)
• 2-Point Box Mounting Bracket for Left or Right Side Stud Mount
  (1)
• Slotted Head, Green Dye Finish, 3/8 in. Ground Screw for 10-32 tapped Hole (100/Clam)
  (1)
• Green Ground Clip, for #14-#10 AWG, Copper (100/Clam)
  (1)
• GRIP-LOK, Old-Work Switch Box Support (1/PR)
  (1)
• #12 Solid Insulated Copper Wire Pigtail, 6 in. Length (25/BE)
  (1)
• Old-Work Switch Box Supports (2-Pk)
  (1)
• 1-Device Cable Protector Plate, 3/4 in. Raised
  (1)
• 2-Device Cable Protector Plate, Flat
  (1)
• 4 in. Square RETRO-RING, Old Work, Used for Life Safety Support
  (1)
• 1-Device Cable Protector Plate, Flat
  (1)
• 2-Device Cable Protector Plate, 3/4 in. Raised
  (1)
• 1-Device Cable Protector Plate, 3/4 in. Raised, Low-Voltage
  (3)
• Gangable Cable Protector Plates for RACO 686, 687, and Nongangable Masonry Boxes
  (1)
• 4 in. Square RETRO-RING, Old Work, Used for Mounting of One of Two Device Applications
  (1)
• Flat, Gangable Cable Protector Plates for RACO 686, 687, and Nongangable Masonry Boxes
  (1)
• Round Cable Protector Plate, 2-3/4 in. O.C. Opening
  (1)
• Adjustable Box Mounting Brace
  (2)
• Non-Adjustable Box Mounting Brace
  (2)
• Voltage Partition for 260, 260H, 911-15 and 263 Boxes
  (1)
• 4 in. Square RETRO-RING, Old Work, Used for Life Safety Support, Red
  (1)
• Flush-Fit Device Leveling Plate
  (1)
• 24 In. Stud Spanner Bar
  (1)
• KWIK-HANG Box Support Hanger
  (1)
• STAB-IT Connector for RACO Grand Slam Boxes
  (1)
• Adjustable Open Box Mounting Bracket
  (1)
• Open Center Bracket for 16 inch Stud Spacing
  (1)
• Open Center Bracket for 24 inch Stud Spacing
  (1)
• Partition for Gangable Boxes 985 and 986
  (1)
• 1-Gang Protector Plate - 3/4 in. Raised
  (1)
• 2-Gang Protector Plate - 3/4 in. Raised
  (1)
• Flat Box/Conduit Support Plate, 12 inches
  (1)
• Lanced Box/Conduit Support Plate, 12 inches
  (1)
• Flat Box/Conduit Support Plate, 18 inches
  (1)
• Repair Clip for Plastic Electric Boxes
  (2)
• OPEN CENTER BRACKET FOR G & S SERIES
  (1)

Product Type

• Steel Boxes and Covers
  (5)
• Steel Box Support Products & Accessories
  (43)
• Commercial Fittings
  (10)

Raised Height

• 0.75 in
  (6)

Size

• 0.609 in x 0.594 in x 1.5 in
  (2)
• 0.609 in x 1.313 in x 1.266 in
  (1)
• 2.463 in x 3.406 in x 1.5 in
  (1)
• 0.843 in x 3.531 in x 3.625 in
  (1)
• 0.063 in x 2.313 in x 2.219 in
  (1)
• 1 in x 1.78 in x 4 in
  (1)
• 0.5 in x 2.313 in x 0.5 in
  (1)
• 3.75 in x 1.5 in x 1.5 in
  (1)
• 6 in x 0.4 in x 0.5 in
  (2)
• 8 in x 0.4 in x 0.5 in
  (6)
• 0.795 in x 0.414 in x 0.414 in
  (2)
• 0.625 in x 3.188 in x 3.188 in
  (1)
• 0.625 in x 3.813 in x 3.813 in
  (1)
• 0.625 in x 4.375 in x 4.375 in
  (1)
• 0.625 in x 4.906 in x 4.906 in
  (1)
• 0.282 in x 1.050 in x 1.050 in
  (1)
• 0.287 in x 1.21 in x 1.21 in
  (1)
• 0.329 in x 1.48 in x 1.48 in
  (1)
• 0.339 in x 1.89 in x 1.89 in
  (1)
• 0.374 in x 2.2 in x 2.2 in
  (1)
• 0.387 in x 2.68 in x 2.68 in
  (1)
• 0.313 in x 16 in x 5.375 in
  (1)
• 0.313 in x 24 in x 5.375 in
  (1)
• 0.16 in x 2.5 in x 4.25 in
  (2)
• 0.5 in x 5.375 in x 14.688 in
  (1)
• 0.468 in x 20.625 in x 5.375 in
  (1)
• 3.688 in x 6.625 in x 4.625 in
  (1)
• 0.44 in x 0.41 in x 0.545 in
  (1)
• 0.019 in x 5.25 in x 3.438 in
  (1)
• 2.948 in x 0.46 in x 0.875 in
  (1)
• 0.938 in x 2.14 in x 3.7 in
  (2)
• 0.313 in x 3.686 in x 3.631 in
  (1)
• 2 in x 4.88 in x 4.75 in
  (2)
• 0.325 in x 2.124 in x 3.64 in
  (1)
• 1.063 in x 3.686 in x 3.631 in
  (1)
• 1.063 in x 3.8 in x 3.694 in
  (1)
• 0.438 in x 3.808 in x 3.631 in
  (1)
• 0.669 in x 2.171 in x 3.64 in
  (1)
• 0.356 in x 1.898 in x 3.53 in
  (1)
• 0.221 in x 2.938 in x 2.938 in
  (1)
• 0.43 in x 16 in x 1.75 in
  (1)
• 3.75 in x 24 in x 1.25 in
  (1)
• 0.31 in x 24 in x 2.52 in
  (1)
• 0.31 in x 20 in x 2.87 in
  (1)
• 4.75 in x 4.5 in x 0.06 in
  (1)
• 4.750 in x 4.750 in x 0.625 in
  (1)
• 0.030 in x 2.281 in x 4.250 in
  (1)
• 26 in x 1 in x 0.04 in
  (1)
• 2.405 in x 0.805 in x 1.245 in
  (1)
• 1.032 in x 1.75 in x 0.983 in
  (1)
• 0.482 in x 15.487 in x 4.811 in
  (1)
• 0.482 in x 23.487 in x 4.811 in
  (1)
• 0.619 in x 3.703 in x 4.033 in
  (1)
• 0.938 in x 2.134 in x 4.228 in
  (1)
• 0.938 in x 3.73 in x 4.228 in
  (1)
• 2 in
  (1)
• 6 IN
  (1)
• 3/4 in.
  (1)
• 3/8 IN, 10-32
  (2)
• For #14-#10 AWG copper
  (1)
• 3 x 2 IN
  (1)
• Pre-galvanized steel
  (1)
• 8 IN
  (1)

Special Feature

• Keep multiple cables organized in new construction with our cable holder
  (2)

Standard

• UL
  (29)
• UL Listed
  (14)
• cULus Listed
  (20)

Standard Package

• 25
  (2)

Type

• Accessories
  (1)
• Concrete Ring
  (1)
• Plaster Ears
  (3)
• Mounting Bracket
  (18)
• Partition
  (4)
• Switch Box Ring
  (1)
• Ground Screws
  (11)
• Cable Protector Plate
  (10)
• Spanner Bar
  (1)
• Bar Hanger
  (1)
• Connector
  (1)
• Accessory
  (4)
• Ground Screw
  (2)
• Switch Box Support
  (2)
• Ground clip
  (1)
• Ground pigtail
  (2)
• Knockout seal
  (10)
• Open Mounting Bracket
  (1)
• Open Center Bracket
  (2)
• Cable Holder
  (2)

Manufacturers